Wiring harness routing & packaging Rules Week 3 Challenge

P Clamp:

P Clamp is used for connecting the connector connection and bundle entry.

Procedure

1. click the part design to select point toolbar and select the point type for create the center point, now then choose the another side of the clamp apply the same procedure for making a point2.
2. then click the plane toolbar to make a plane at center of the point, well i choose the (parallel through the plane) option to apply it. and same for the opposite side of plane2 . now we have to fix the connector at one possition so i choose the left from my side of the clamp to fix the plane using (offset plane).

Backshell:

part of a electric conductor or other electrical device, such as cable clamp adapter, that is threaded onto the rear connector accessory thread of plug or receptable connector to makeuo the total connector assembly.

Procedure

1. make the point at center of the bundle entry
2. then the same proccess for make a point at backshell
3. now we have to create a axis for backshell (click>insert>axis system) or another option use the axis tool. then choose the orgin of the component. next, step to fix the axis yaxis is face at front view then xaxis is fce at the lock (how to change the axis, let me explain click the xaxis then change the degree into 90, this procedure is applied for both y&z axis).

Corrugated tube:

A corrugated tube is consist of plastics or insulator. this tube is plased at high temprature areas for packing the wires, varities of tubes are used in industries and with different cost .

Procedure

1. choose the carrugated tube then click the part name it will show us the OD(outer diameter) ID(inner diameter) last one THICKNESS.
2. now swlwct the diameters&thickness for corrugated tube.