Wiring harness routing & packaging Rules Week 3 Challenge

Q1. Download following cad data & define it as Electrical support using Electrical Part design Workbench. Define all the necessary properties.

Objective:

To define clip cad as electrical support using electrical part design workbench.

Process:

• First, we have to define the geometry parameters of the P clamp.
• We need to create an entry, exit, and base plane.
• After creating the geometry parameters we can switch to electric part design.
• Now we can select the support definition.
• In the first plane definition select the entry point and entry plane.
• Select the entry plane for second plane definition.
• Select the base plane for base plane definition.

Result:

The P clamp is defined as an electrical support part.

Q2. Download the following Back shell cad data & define it as Electrical back shell using Electrical Part design Workbench. Define all the necessary properties.

Objective:

To define Back shell cad as Electrical back shell using Electrical Part design Workbench.

Process:

• First, we have to define the geometry parameters of the Backshell.
• We need to create an entry point and exit point.
• Now create an axis system for the entry point.
• We can select the bundle connection point.
• Now we can switch electric part design.
• We can select the backshell definition.
• Now select backshell connection and select representation as point 1.
• contact as face, coincidence as Y-axis, and orientation as X-axis.
• Now select bundle connection point definition.
• Select representation as face, point as point 2, and initial condition as face.

Result:

Back shell cad is defined as an Electrical back shell.

Q3. Create the Following Corrugated tubes & Add them to the Catalogue under the “Slit COT” family.

Objective:

To create  Corrugated tubes with the given dimensions & Add them to the Catalogue under the “Slit COT” family.

Process:

• Open a new part and name the part.
• Now switch to electrical part design.
• Select the command define protection part and select the part.
• Now enter the given values.
• Now save the Corrugated tubes and create a catalogue.
• Open a new part and select the catalogue document.
• Now select add family and name the family as Slit COT.
• Select Conduit and click save.
• Open the store device command and select the catalogue we have created.
• Select the family as Slit COT and click ok.

Result:

We have created Corrugated tubes with the given dimensions & Add them to the Catalogue under the “Slit COT” family.