Wiring harness design in CATIA V5 - 3D modeling Week 2 Challlenge
[ 1.Deutsch DT06-08SA ]
STEPS
- IN PART DESIGN
1) DOWNLOAD CONNECTOR 3D.
2) DEFINE POINTS (FOR BUNDLE ENTRY POINT & CONNECTOR CONNECTION).
3)DEFINE AXIS SYSTEM FOR CONNECTOR CONNECTION AT FRONT (Y AXIS TOWARDS CONNECTOR MATING,X AXIS TOWARDS LOCKING,Z AXIS TOWARDS LEFT OR RIGHT).
- THEN SWITCH TO ELECTRICAL PART DESIGN
1)DEFINE AS A CONNECTOR (SELECT CONNECTOR TYPE I.E SINGLE INSERT & NO OF TERMINATIONS).
2)DEFINE BUNDLE CONNECTION POINT
(SELECT CONNECTOR, REPRESENTATION:FACE, POINT:BUNDLE ENTRY POINT, INITIAL CONDITION : FACE ).
3) CONNECTOR CONNECTION POINT
(NAME : SELECT CONNECTOR, REPRESENTATION: POINT, CONTACT: MATING FACE , COINCIDENCE Y AXIS,ORIENTATION : X AXIS)
[ 2.TYCO 174357-2 ]
STEPS
- IN PART DESIGN
1) DOWNLOAD CONNECTOR 3D.
2) DEFINE POINTS (FOR BUNDLE ENTRY POINT , CONNECTOR CONNECTION & CAVITY CONNECTION ) .
3)DEFINE AXIS SYSTEM FOR CONNECTOR CONNECTION AT FRONT & FOR CAVITY (Y AXIS TOWARDS CONNECTOR MATING,X AXIS TOWARDS LOCKING,Z AXIS TOWARDS LEFT OR RIGHT).
- THEN SWITCH TO ELECTRICAL PART DESIGN
1)DEFINE AS A CONNECTOR (SELECT CONNECTOR TYPE I.E SINGLE INSERT & NO OF TERMINATIONS).
2)DEFINE BUNDLE CONNECTION POINT
(SELECT CONNECTOR, REPRESENTATION:FACE, POINT:BUNDLE ENTRY POINT, INITIAL CONDITION : FACE ).
3) CONNECTOR CONNECTION POINT
(NAME : SELECT CONNECTOR, REPRESENTATION: POINT, CONTACT: MATING FACE , COINCIDENCE Y AXIS,ORIENTATION : X AXIS)
4)CAVITY CONNECTION POINT
( NAME : SELECT CONNECTOR, REPRESENTATION: POINT, CONTACT: MATING FACE , COINCIDENCE Y AXIS,ORIENTATION : X AXIS)
[ 3.TYCO 85229-1 ]
STEPS
- IN PART DESIGN
1) DOWNLOAD CONNECTOR 3D.
2) DEFINE POINTS (FOR CAVITY CONNECTION ) .
3) DEFINE AXIS SYSTEM FOR CAVITY CONNECTION (Y AXIS SAME TOWARDS AS DEFINED FOR CONNECTOR,X AXIS SAME TOWARDS AS DEFINED FOR CONNECTOR,Z AXIS SAME TOWARDS AS DEFINED FOR CONNECTOR).
- THEN SWITCH TO ELECTRICAL PART DESIGN
1)DEFINE AS A MOUNTING EQUIPMENT (SELECT SELECT CLIP & NAME IT).
2)DEFINE CAVITY (AXIS SYSTEM FOR CAVITY CONNECTION OF CLIP)
(NAME : SELECT CLIP, REPRESENTATION: POINT, CONTACT: MATING FACE , COINCIDENCE Y AXIS,ORIENTATION : X AXIS)