Week 9 Challenge

Analyze and Design a Boiler shed structure as per IS code in Tekla Structural Designer. Kindly refer to the enclosed plan and elevation given below for modelling. TOOLS USED : Grids. Levels. File. Model. Manage property sets. Column. Beams. Frames. Loads. Loadcases. Wall panels. Roof panels. Analyze. PROCEDURE : First…

QUESTION :  Develop general arrangement for the RC office building. Analyze and design the building as per IS standard code in TEKLA STRUCTURAL DESIGNER. Refer the attached plan and elevation. The building to be designed for dead, live, wind and seismic loading. Report of each member to be generated and extract drawings…

Q1 )   Generate report for the steel building design from challenges 1 – 6 along with the loading summary. ANS 1) AIM : To generate report for the steel building design from challenge 1-6. TOOLS USED : Report. Model report. Show report. PROCEDURE : Open the structure and analyze it.   Now click on…

Q1 )  Design the slab and foundation of the model. Outline the thought process for designing of the elements (column, beam, slab and foundations). ANS 1) AIM : To design the slab and roof foundations of the model and to outline the thought process for designing of the elements. TOOLS USED : Design. Settings.…

Q1)  Based on the analysis design RC column and beam. ANS 1) AIM : To design RC column and beams based on the analysis. TOOLS USED : Review. Check member. Static. PROCEDURE : First we have to open the file in which we have completed the structure.   Next we have to validate the model in search on any errors…

Q1 ) Generate seismic loading based IS codal provisions and zone II. Any other data you can assume and input accordingly. AIM : To generate seismic loading based IS codal provisions and zone II. Any other data you can assume and input accordingly. TOOLS USED : Load. Loadcases. Seismic wizard. Seismic load. PROCEDURE :…

Q1 ) Calculate dead load in design report based on IS code and apply dead load on the model Finishes of 50mm Slab thickness as per the design Brick wall load Roofing load ANS 1) AIM : To calculate the dead load based on the design and apply it on the structure. TOOLS USED : MS Excel. Loads. Loadcases. Dead load. Area.…

Q1) Setup model for RC building design and based on following parameters for cover. ANS 1)   AIM : To setup model for RC building design and based on following parameters for cover.   TOOLS USED : Tekla software. File. Settings. Structural Defaults.   PROCEDURE : First open a new tekla file for starting…

QUESTION )   Analyze and design a steel building to 10T CRANE as per IS standard code in TEKLA STRUCTURAL DESIGNER. Refer the attached plan and elevation. Provide bracings and moment connection for lateral stability.  Consider dead, live, equipment and wind loading. Consider the brick wall loading for 150mm…

1.Summarize your study for the bending moment, shear force and deflection diagrams for the elements of the model. Ans) Bending Moment: It refers to the internal rotational moments that cause a section to bend. In the case of a beam, it can be calculated as the algebraic sum of the moments about the section of…

Q1 )  Generate manual wind loading in the design report based IS code as per the following input Basic wind speed = 39m/s Terrain category 2 ANS 1 : AIM:   Generate manual wind loading in the design report based IS code as per the following input TOOLS USED : Excel. IS codes. Calculator. PROCEDURE :…

Q1. Calculate dead load in design report based on IS code and apply dead load on the model Finishes of 50mm Slab as per design Brickwall 150mm thickness Roofing load based on purlin size Ceiling loading 0f 0.3KN per sq m ANS 1) AIM : To Calculate dead load in design report based on IS code and apply dead load on the…

1) Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class ans) Aim: To use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture…

1) Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve.  ans)  Aim: To create a set of sinusoidal points and create a curve and create a surface out of the curve by using Dynamo  Tools Used:  code block  list  line by star and end pint …

1) Use the shortcut keys in Revit discussed in class to complete the following tasks and list them below            a. Using 3D model create a section box            b. To create similar doors and windows in a floor plan layout          …

1) What are HVAC systems ? Why are they essential in modeling of buildings Ans)HVAC stands for heating,cooling and conditioning.HVAC systems are milestones of building mechanical systems that provide thermal comfort for occupants accompanied with indoor air quality. HVAC systems can be classifIed into central and local…

  Create a G+4 Residential building as per NBC standards and make it a central model file. Your model should contain: The sloped roof at the top level of the building (10 degrees) Architectural components including furniture and home appliances Room tags and Annotations Section cut through each room either longitudinally…

1) Select the type of structure you want to build from one of the three below        a. Multi Unit Residential Apartment        b. Office Buildings        c. School Ans) Multi storage apartment.   2) Assume reasonable assumptions for geographic and location…

1) Open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project.  Ans) AIM: To set project base point and project shared coordinates for the project.  COMMANDS USED:                    Collaborate                    Architectural  …

1) Why are building codes or standards essential for the modeling/ efficiency of drawings in Revit? ans) building codes give us certain rules to be followed in the planning by specifying certain limits by taking various things into consideration. By following the building code there will be more chances of the plan…

1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level ans) Aim: To proceed from the First Floor Level.Model a Ceiling from the architecture tab above the walls at the first-floor level. Tools used: architecture…

1) Use the project file created from Week 2. Use it for this assignment. Based on yourlayout from week 2, using the floor tool under the architecture tab and select the floor withappropriate material and thickness using the property browser create a layout in theGround floor level. Align the floor plan with grids created…

 1) BIM stands for building information modeling.BIM is used in presenting 3D models.BIM is flexible in usage, in BIM when we make a change in one view all other views automatically change which is not the scenario in 2D CAD .   2) Aim:To use insert Tab and choose a category, Pick a…

1) Aim: To create a new project from file menu and name it accordingly. Procedure: i) Open Autodesk Revit  ii) Select the new file option on the left side of the screen. iii) Now open a new file and selct the template accordingly. iv) A new file created using revit.   2) Aim: To save a new file and open that…