Week - 8 - Morphing

Aim:-

To make the design changes in the model using "Ansa" withou the input of any numerical value.

1. To increase the height of the features of original length 12mm to 50mm using "MORPH Deck".

2. Varying the length of the curve in the X-axis, using "MORPH Deck."

3. Change the design of the edge of the model in X & Y - Axis using the "MORPH Deck.

Procedure:-

1. For varying the size of the model, need to select the "MORPH Deck".

2. Click on the "Boxes<New<Ortho" and select the area that is to be varied.

3. "Box" over the selected areas will be reflected, which can help in selecting the areas that is to be varied.

4. Click on the "Box morphing<Move<X,Y,Z-axis." as per the model requirement.

5. Select the corners of the boxes that are need to be modified.

6. Make the required changes nad confirm.

7. The change will get done and delete the boxes from "Box<Delete".

Learning Outcome:-

1. Morphiing is, something which is used to change the design or shape of any component without any numerical input.

For Example: All the cars having the hatchback and sedan version of the same version can be defined by "morphing" to check weather the design changes are compatible or not.

2. I have learned what is "Morphing" and how to use the "MORPH Deck."

3. I have learne how to vary the design withou the input of any numerical values.

Conclusion:-

Design modifications can be done in the CAD Geometry without actually using the Auto CAD and giving any nuumerical inputs. This can be done using "ANSA<Morph Deck."