Week 8 - Challenge 1 - Draft Analysis on a Fan Cover

 PART DESIGNS OF QUICK RETUREN MECHANISM - QUICK RETURN MECHANISMQuick return mechanism is used where the rotary inputs is provided to get the reciprocating motion as the output. Theywere achieved by constraining the relative motion of the links as per the requirement. Quick return mechanism enablesthe quicker retraction…

AIM : Creating the Core and Cavity blocks for the Switch Bezel Design. Core : The core is the male part which forms the internal shape of molding, the upper half of the mold where the toolwhere the plastic part is injected from is called core. Cavity : The cavity is the female part which forms the external shape of molding.…

AIM:Creating the Center Console Coin Holder component through the given Class-Asurface of 2.5 mm thickness with the tooling axis meeting the requirements of the draftangle and at the end performing the Draft analysis on the model   PROCEDURE REQUIRED DRAFT ANALYSIS:STEP 1: Ensure there is no gap between the two neighbouring…

Take the Thickness of the component to be 2.5 mm AIM :  To create the DOOR ARM REST through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.  OBJECTIVES…

Create the Switch Bezel Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.  Take the Thickness of the component to be 2.5 mm AIM…

DRAFT ANALYSIS AND PLASTIC COMPONENT MODELLING FOR BASE BRACKET AIM :  To perform the Draft analysis,Tooling axis creation for both the given Class-A surface and the final plastic component OBJECTIVES : BASE BRACKET Explaining the Draft analysis and the Tooling axis creation.  Creating the tooling axis particularly…

DRAFT ANALYSIS FOR FAN COVER AIM :  To perform the Draft analysis and the Tooling axis creation for Fan Cover OBJECTIVES : FAN COVER  Explaining the Draft analysis and the Tooling axis creation.   Creating the tooling axis particularly the Bisecting method.  ABSTRACT :  DRAFT ANALYSIS : The…