Week 7 - Creating connection for Rear door

Meshing of Rear Wheel Holder challengeAim: To pre-process the Rear Wheel Holder (Spare Wheel Floor Panel) Sheet Metal component using HyperMesh. Objectives: Manually extract the mid-surface and perform geometry clean up on the component. Generate a mesh with a smooth flow and minimize Tria element concentration. Ensure…

I AM NOT ABLE TO SUBMIT THE CHALLENGE WITH THE CONTENT AND NECESSARY SCREENSHOTS DUE THE DRAW BACK IN THE LMS TOOL.PLEASE RECTIFY THIS ISSUE THERE'S LOT OF LAGGING HAPPENING WHEN I TRY TO WRITE A REPORT HERE, AND ALSO THE CHALLENGE DOES NOT GET SUBMITTED FOR WHATSOEVER REASON PLEASE RECTIFY IT.I HAVE UPLOADED THE MODEL…

Week 3-Meshing of Hood Challenge QUALITY CRITERIA: Follow the below-mentioned quality criteria, mesh the component given below and assign thickness: Target Element Length = 5 Units S.N Quality Criteria  Value  1 Aspect Ratio  5 2 Skewness 45 3 Warping 15 4 Taper      0.5 5 Min. Length 2 Units…

  Week 7 - Creating connection for Rear door AIM: Establishing connections between regions through the application of RBE2 and RBE3 elements. PROCEDURE: Step 1 – Import the provided rear door model into the ANSA software.   Figure – 1 DOOR MODEL   Figure – 2 DOOR MODEL HINGE REGION Figure…

Solid meshing Aim: Mesh the provided rearview mirror component in both 2D and 3D, verifying the model for geometric errors and making necessary corrections. Additionally, ensure that the generated mesh adheres to specified quality criteria. Procedure: 1). The first step is importing the model, a stage that frequently reveals…

  Project 1 - 2D meshing on the instrumental Panel     AIM: Extract the mid-surface and create a 2D mesh for the instrument panel, adhering to specified quality standards. OBJECTIVE:     Conduct geometric refinement on the component. Generate a mid-surface from the original component. Mesh the…

Week - 4 - 2D meshing for Plastic components     Aim: To generate a 2D surface mesh for the provided plastic component by extracting its mid-surface.   Objective: The primary goal is to develop a Finite Element (FE) model for a plastic component that    complies with defined quality standards…

Project 1 - Meshing of Floor Panel Aim: The primary goal is to develop a Finite Element (FE) model that adheres to specified quality parameters and exhibits a smooth mesh distribution for a floor panel component. Objective: The main objective is to create a Finite Element (FE) model for a floor panel component that meets…

    NOTE : I WAS NOT ABLE TO SUBMIT THE CHALLENGE THROUGH THE DASHBOARD, I HAVE UPLOADED THE FILE IN MY GOOGLE DRIVE AND HAVE SHARED THE LINK HERE PLEASE GO THROUGH THE LINK TO FIND BOTH THE MODEL AS WELL AS THE REPORT. https://drive.google.com/drive/folders/1sJM4v12UAX4B_9wTkkD2hX0IVIOBaIF-?usp=drive_link