Design of Rest Unit & Clamp Unit

AIM: To Design & Assemble Hood outer panel, inner panel and the necessary reinforcements by following the Design parameters & Master section which is given to us as an input. ABSTRACT: The project report deals with the explanation of steps and procedure followed while developing the HOOD Assembly of a car using…

                                                                                           …

                                                                                           …

 AIM:To design and devlopment of vehicle interior door trim using Catia v5 Tool using give A Class Surface and Adding thickness to it.Also to create a Ribs and Locators as per the given Master section SUMMARY:          This Project explains in brief regarding the Design life cycle followed in automotive industry by working…

AIM -  The Aim of this project to develop a closed surface model by using of the master section and developed B side feature for locked the degree of freedom of the component. Here we can use B Pillar master section providing by the OEM Standards. Software used- CATIA V5. ABSTRACT- The report details about the…

Model 1: Drawing 1:   Model 2: Drawing 2:   Model 3: Drawing 3:   Model 4: Drawing 4:

Class A surface: Draft Analysis of Class A: CLass B surface: Class C surface : Surface Model: 3D model: Draft Analysis of the Solid Model:    

Class A Surface: Draft analysis of the Class A surface: Class B Surface: Class C Surface: Closed Surface: 3D Model: Draft analysis of the Close Model:    

Core Block: Cavity Block: Intersects: Mould Design:

Sketch of Ribs: Ribs Extrude: Intersect of Coin Holder and XZ Plane: All Views: Isometric View: Side View: Top View: Bottom View:

Final Model: All Views: Isometric View: Side View:   Front View:  

Door Applique: Attachment panel: Design tree: Fianl model: Draft analysis of Door Applique: Draft Analysis of the Attachment Panel: All Views:  

Base Mount Bracket: 3D Model:   Design Tree:  

OBJECTIVE: To design 3 different types of swivel clamp unit with different riser, Blade and Clamp Arm for the given car Panel and design a pin Clamp unit for the given Car Panel with optimum use of material and space constraint also considering Panel Thickness as 1mm for the given car panel.        …

AIM:   Bill of Materials (BOM):A bill of materials (also known as a BOM or bill of material) is a comprehensive list of parts, items, assemblies and other materials required to create a product, as well as instructions required for gathering and using the required materials. The bill of materials can be understood…

AIM: 1. Create 2D Drawing for each Clamp Units with all child parts and also create Child pard drawing for the same for the Fixture assembly created in challenge 8. 2. Create 2D Drawing for each Pin Units drawings with all child parts and also create Child pard drawing for the same for the Fixture…

Aim: 1)Draft a Key Sheet for the Complete Fixture assembly created in challenge 8. 2)Draft a Base Unit and the Fix Pin Unit drawings with all child parts for the complete Fixture assembly from challenge 8. Key Sheet For Complete Fixture Assembly: Base Unit Drawings: Pin Unit 1 Drawings: Pin…

1)What are the drawing templates? Drawing Templates:  If compared with verbal or written description, drawing offer far better idea about the shape, size & appearance of any object or simulation or location, that too in quite a less time. Hence it has become the best media of communication not only in engineering…

AIM: Perform 3D finish for all units of Assembly design. Create Rough locators for Assembly.                                                3D-FINISHING:  3d Finish is a process…

1) What do you understand by the 3D finish process? A)3D finish: 3d Finish is a process where the design is being completely finish and to be ready for final simulation and 2d detailing. While finishing the design the nominality is checked which ensures the easy assembly of all the units. The hole concentricity and holes…

AIM: To Design a base unit for the Pin units,Clamp units,Swivel clamp units with all weldments for the given Car panel.                                       SOFTWARE USED: CATIA-V5 INTRODUCTION: Base Unit: A base unit is the…

1)What is the Base Unit? What are the typical parts of the Base Unit? A)Base Unit: A base unit is the unit designed to mount all the other units of the tool,also other parts necessary for a tool like pneumatic valve box,trunking cable path will also be mounted on to a base unit. Below are the some parts of a base unit…

OBJECTIVE: The main aim of this project is to design two different types of rest units and three different types of Power clamp units with different riser,Blade and Clamp arm for the given Car panel.                                    …

1)What is Design Methodology? Design Methodology: Design Methodology is nothing but the steps followed during the concept designing stages of fixture design.                                        Design Methodology is divided…