Week 12:Project-1-Meshing of Door Inner Panel Challenge
Aim:
Do 2D meshing on given CAD model with following Quality criteria:
Target Element Length = 4 Units
|
S.N |
Quality Criteria |
Value |
|
1 |
Aspect Ratio |
5 |
|
2 |
Skewness |
45 |
|
3 |
Warping |
15 |
|
4 |
Taper |
0.5 |
|
5 |
Min. Length |
2 Units |
|
6 |
Max. Length |
6 Units |
|
7 |
Min angle Quad |
45 |
|
8 |
Max angle Quad |
135 |
|
9 |
Min angle Tria |
20 |
|
10 |
Max angle Tria |
120 |
|
10 |
Tria % |
10 |
Component - Side Door Model
Procedure:
1)Import the given “open door Geometry model” CAD model
2)change to Topology view from auto mode
3)Since the component is a plastic model and has variable thickness Both manual midsurfacing and automidsurfacing methods are adopted.
4)The Mid surface for Ribs are created through manual Midsurfacing and auto midsurfacing done for entire component after doing surface fillets where ever is required.
5)Do 2D automeshing with above quality criteria.
6)solve the failed elements using the Tools given
File:
K1.hm