Challenge

Preprocessing of side door panel of a plastic component in a car using Hypermesh

OBJECTIVE:

To Mesh the component by using the given quality criteria below and assign thickness.

Target Element Length = 4mm

S.N Quality Criteria Value
1 Aspect Ratio 5
2 Skewness 45
3 Warping 15
4 Taper 0.5
5 Min. Length 2mm
6 Max. Length 6mm
7 Min angle Quad 45
8 Max angle Quad 135
9 Min angle Tria 20
10 Max angle Tria 120
10 Tria % 10

PROCEDURE:

1. First of all go to Import Solver Deck > lmport Geometry > Choose File > Import. The geometry is imported.

2. Geometry color mode > By Topo.

3. Divide the component into five parts and then extract midsurface individually.

4. Though it is plastic component, manual midsurfacing is highly preferable.

5. For manual midsurface go to Goem < Surface edit < offset. Before offset we have to find the thickness of the component so that use F4 and select two

points option.

6. After finding the thickness of the component, select one side of the surface and then enter the offset valve and click offset.

7. After doing offset to the entire component do geometry cleanup.

8. To cleanup the Geometry use these options :

F11 > filter surf > Lines > to fill the gapes.

F11 > Toggles edges > by changing the tolerance value to fill the gapes / Suppresse some Line which are below the target element size.

F11 > Split Surf-line > To delete and recreate a new line.

Geom > Surfaces > Spline/Filler or Ruler or Skin these option are used to cleanup free and non manifold edges.

9. After the Cleaning up the geometry, Go to 2d > Automesh > surfs > Displayed > Element size: 4mm > Mesh type: mixed > Mesh.

10. Check the mesh flow. And then remesh the improper mesh area.

11. F10 > Quality Criteria > Enter the Given Criteria.

12. Check Individually all types of elements in which the value has been entered.

13. Some elements can fail in this Quality criteria, They can be rectified by using some options.

Tool > Check elems > Save Failed.

Tool > Mask > elems > Retrieve > Mask > Reverse. ( Only the failed elements will be shown in the display )

F12 > elems > Select elements > Mesh ( Some failed elements can be removed by remeshing them )

2d > Qualityindex > cleanup tools > Display Threshold : fail > there are lot of options there in cleanup tools, By using these option we can remove the failed elements.

14. And then again check elements in the given Quality criteria. If there is no elements failed then the components is perfectly meshed with the given criteria.

15. Follow the above step for remaining all the four parts.

16. After completing the entire components the image given below.

RESULT AND CONCLUSION:

Therefore, The Midsurface for each component extracted seperately by using the given element thickness. And by doing the proper Mesh by using the given Quality Criteria.
Your portfolio, next

Ship work like this
in your own course.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.