Week 11 - Project - A pillar Design with Master Section

AIM The objective of this project to develop Closed Surface Model using Master Sections and to develop attachment features for Fixation of Parts by following OEM Design standards and procedures in CATIA SURFACE WORKBENCH and PART DESIGN ABSTRACT The report details about the Design Life Cycle in Automotive Industry with…

Aim: To design a backdoor of the car on sheet metal using the appropriate design and provided skin data by considering design parameters.   Objective: To design a back door of a car with an inner panel, outer panel and reinforcement for hinges, gas stay, Wiper motor and latch. The inner panel is subjected to the draft…

THE DETAILED REPORT FOR HOOD DESIGN HOOD DEFINITION AND CONCEPTS ARE (THE WORD OF HOOD IS COMMON ENGLISH WORD) THE CONCEPTS OF HOOD ITS COVER THE ENGINE COMPONENT AREA AND ITS USED OPENING AND CLOSING OF ENGINE COMPONENT TO REPAIRS AND MAINTANCE ASPECTS Objective: The aim of this project is to construct a well defined…

INTRODUCTION:           An automobile roof or car top is the portion of an automobile that sits above the passenger compartment, protecting the vehicle occupants from sun, wind, rain, and other external elements.           When…

DESIGN OF FRONT FENDER- FENDER IS THE US ENGLISH TREM FOR THE PART OF AN AN AUTOMOBILE (VEHICLE BODY) THAT FRAMES A WHELL WELL (THE FR=ENDER UNDER SIDE) ITS IS PRIMARY PURPOSE IS TO PREVENT SAND ,MUD ROCKS ,LIQUIDS AND OTHER ROAD SPRAY FORM BEING THROWN INTO AIR BY THE ROTATING MOTION  WHEN VEHICLE IS MOVING ,TRIES…

1.WHEEL ARC CALCULATION IT VERY IMPORTANT IN EVERY OEM INDUSTRY MAIN PURPOSE OF WHEEL ARC CALCULATION IS SAFETY OF PASSENGERS,CUSTOMER ITS HAS MANY STANDARDS EXAMPLE:- EUROPEAN,JAPAN WE INDIANS ARE USED EUROPEAN STANDARDS  2.IN EUROPEAN CONCEPTS DISTANCE OF POINTS ARE MUST BELOW 10MM 3.AND THERE ARE 5 POINTS FROM…

SECTION MODULUS OF HOOD DESIGN:- SECTION MODULUS DENOTED:- S(CONCEPTS OF SECTION MODULUS IS SECTION THE COMPENTS OR MEDIUM IN THAT SECTION AREA HOW MUCH RESISTANCE TO IMPACT OR LOAD THAT OBTAIN FROM ANY RESONS SIMPLY WE CALLED AS STIFFNESS OR STRENGHT OF AN MEDIUM) S=I/Y I=DENOTED MOMENT OF INERTIA Y=DENOTED DISTANCE OF…

                                                                                   REPORT ON UNDRBODYCOATING Underbody…

BENCHMARKING Benchmarking is a process of measuring the performance of a company’s products, services, or processes against those of another business considered to be the best in the industry, “best in class.” The point of benchmarking is to identify internal opportunities for improvement. By studying…

All above asked are attached in zip file

All above asked are uploaded in below attached zip file

All above asked are uploaded in below 

All above asked are attached below

All above asked are attached below 

ALL ABOVE ASKED ARE ATTACTED BELOW  

All above asked are uploaded  And important issue i want speak with ur team regards cad                     

All asked above are attached below in zip file

All asked above are attached below zip files

All asked above are attached below zip files