Week 11:- 2D Detailing Challenge 2
Week 11:- 2D Detailing Challenge 2
OBJECTIVE:-
1. Create a 2D Drawing for each Clamp Unit with all child parts and also create a Child pard drawing for the same for the Fixture assembly created in challenge 8.
2. Create a 2D Drawing for each Pin Units drawings with all child parts and also create a Child pard drawing for the same for the Fixture assembly created in challenge 8.
INTRODUCTION:-
The fixture design after the 3D finishing process has to be done with 2D finishing before it is sent for manufacturing. All the dimensions of the fixture units and their child parts have to clearly mentioned in the drawing sheets. The detailing can be changed as per the requirement of the customer and company standards. GD&T must be used in order to reduce the cost of manufacturing.
All the views must be clearly visible and provided with dimensions in the drawing sheets.
I am using the first angle of projection for Drafting.
2D Detailing of the Clamp unit 1
It is saved as P001_Z01_ST01_01_05_CLAMP_UNIT_TYPE 01
The front view, bottom view, Top view, and right side view are shown for the clamp unit. The overall dimensions are provided also with the Isometric view of the Clamp Unit with all the subparts marked.
Detailing of the clamp Mylar
Detailing of the Rest Mylar
Detailing of L-block
Detailing of L-block-2
Detailing of Riser
Detailing of shims
2D Detailing of the Clamp unit 2
It is saved as P001_Z03_ST01_01_05_CLAMP_UNIT_TYPE 02
The front view, bottom view, Top view, and right side view are shown for the clamp unit. The overall dimensions are provided also with the Isometric view of the Clamp Unit with all the subparts marked.
Detailing of the Rest Mylar
Detailing of the clamp Mylar
Detailing of Riser
Detailing of Block
Detailing of Shims
2D Detailing of the Clamp unit 3
It is saved as P001_Z03_ST01_01_05_CLAMP_UNIT_TYPE 03
The front view, bottom view, Top view, and right side view are shown for the clamp unit. The overall dimensions are provided also with the Isometric view of the Clamp Unit with all the subparts marked.
Detailing of Riser
Detailing of the clamp Mylar
Detailing of the Rest Mylar
Detailing of Shims
2D Detailing of the Swivel unit 1
It is saved as P001_Z03_ST01_01_06_SWIVEL_UNIT_TYPE 01
The front view, bottom view, Top view, and right side view are shown for the clamp unit. The overall dimensions are provided also with the Isometric view of the Swivel Unit with all the subparts marked.
Detailing of the clamp Mylar
Detailing of the Rest Mylar
Detailing of clamp Arm
Detailing of Rest Arm
Detailing of Shims
Detailing of Blade
Detailing of Bush
Detailing of male stopper
Detailing of Female stopper
Detailing of Riser
2D Detailing of the Swivel unit 2
It is saved as P001_Z03_ST01_01_06_SWIVEL_UNIT_TYPE 02
The front view, bottom view, Top view, and right side view are shown for the clamp unit. The overall dimensions are provided also with the Isometric view of the Swivel Unit with all the subparts marked.
Detailing of Clamp mylar
Detailing of Rest mylar
Detailing of Clamp Arm
Detailing of Bush
Detailing of male stopper
Detailing of Female stopper
Detailing of Shims
Detailing of Blade
Detailing of Riser
2D Detailing of the Swivel unit 3
It is saved as P001_Z03_ST01_01_06_SWIVEL_UNIT_TYPE 03
The front view, bottom view, Top view, and right side view are shown for the clamp unit. The overall dimensions are provided also with the Isometric view of the Swivel Unit with all the subparts marked.
Detailing of Clamp mylar
Detailing of Clamp Arm
Detailing of Rest mylar
Detailing of male stopper
Detailing of female stopper
Detailing of Shims
Detailing of Riser
2D Detailing of the Pin Clamp Unit
It is saved as P001_Z03_ST01_01_07_PIN_CLAMP_UNIT
The front view, bottom view, Top view, and right side view are shown for the clamp unit. The overall dimensions are provided also with the Isometric view of the Clamp Pin Unit with all the subparts marked.
Detailing of Rest myalr
Detailing of Clamp mylar
Detailing of Clamp Arm
Detailing of Pin
Detailing of shims
Detailing of male stopper
Detailing of Female stopper
Detailing of Bush
Detailing of Riser
Detailing of Retainer
Detailing of Blade-02
CONCLUSION
Hence, the Clamp unit drawings with all the child parts and the Fix Pin Unit drawings with all child parts for the complete Fixture assembly were completed.
thanks