REVIT_ Plan, 3D View & Structural Drawings_Project 2

1) Select the type of structure you want to build from one of the three below
a. Multi Unit Residential Apartment
b. Office Buildings
c. School

Ans: My project is on Multi Unit Residential Apartment

2) Assume reasonable assumptions for geographic and location details for your project modeling. Based on assumptions and type of structure selected identify the modeling requirements from NBC

Ans: My project is loacted at residential area and project is modeling as per NBC rules.

3) Using the structural model, include the following components based on the type of structure selected
a. Foundation – Isolated / Wall/Matt Foundation
b. Columns
c. Beams Connected to Columns
d. Roof Framing/ Truss
e. Floor / Decks
f. Floor Openings for Elevators and Stairs

Aim: To create foundation, columns, beams and roof to the structural model.

Tools: Levels, view, insert, columns, beams, foundation, floor and edit boundary.

Procedure:
1)Open structural model that we created in week-6.

2)Add or remove the levels as per requirements in the elevation view.

3)Click on insert toolbar, select load families and insert foundation.

4)Add foundation to the foundation level.

5)Open structural toolbar, select columns and place them in plan.

6)Same as columns ,add beams and truss to the model.

7)Add floor to the model from structural toolbar.

8)Select floor, click on edit boundary and edit floor for staircase or elevator.
9)Click on synchronize, select synchronize to the central model.

Reult: Foundation, columns,beams and floor are added to the structural model.

4) Using the architectural model, include the following components based on the type of structure selected
a. Wall Layout with appropriate material and finishing
b. Exterior façade with fancy finish
c. Interior partition walls to size rooms
d. Components to add details to room ( Desk, Chair, Lighting, Plumbing fixtures)
e. Add components such as stairs Elevators
f. Have at-least one side of building with curtain walls and glass panels
g. Include interior and exterior lighting fixtures
h. Place proper topographic components from outside ( Trees, Parking, Plants) to add details to the model

Aim: To create architectural model with appropriate material and finishing.

Tools: Architectural project, walls, roof, edit type, partition walls, windows, doors and railing.

Procedure:
1)Open architectural model created in week -6 challenge.

2)Click on architectural toolbar, select wall and draw on the plan.

3)Select the the wall and change the property to curtain walls.

4)Click on roof under architectural toolbar and add to the roof level.

5)Click on architetcural toolbar, select floor and draw on floor plan.

6)Click on wall,select partition walls and draw inside the building.

7)Add windows, doors, railing, chair, desk and lightning fixtures.

8) Click on stairs from architectural tool bar and add to the floors by creating shaft.
9)Add trees and plants from components under architectural toolbar.

Result: Architectural model is created and finishing is completed.

5) Provide set of drawings in architectural and structural model to list the following details with categories and appropriate sheet templates included
a. Floor Plans with Annotations
b. Elevations
c. Sections

Aim: To add floor plan, elevation and section plans to the sheet.

Tools: View, sheet, floorplans, elevation and section.

Procedure:
1)Click on view toolbar and select sheet.

2)Drag the floor plans to the sheet.

3)Edit the parametersbased on plan.
4)Drag the elvation view to the sheets.

5)Click on view toolbar, select section and draw section in floor plan.

6)Drag the section view to the sheet.

Result: Plan views, elevation and section views are added to the sheets.

6) Using the Rendering settings, Render images of 3D model produced and include the rendered images to the drawing sheets
a. Rendering from interior rooms
b. Rendering from out showing topographic features
c. Rendering through structural framing

Aim: Render the images of interior rooms, topograhic features and structural framing.

Tools: View, render, save the project, 3d-view and camera.

Procedure:
1)Click on view toolbar,select 3d and select camera.

2)Place the camera in room and click render.
3)Edit the parameters and click on render.
4)Click on save project to save the image.

5)Similarly render the interior and structural images.

Result: Interior rooms, topograhic features and structural framing images are rendered successfully.

7) Print the set of drawing sheets created and submit the drawings from architecture and structure model

Aim: Print the set of drawing sheets created and submit the drawings.

Tools: Print, view and sheet.

Procedure:
1)Click on print option.
2)Click on view or sheet to be printed.
3)Edit the parameters and click ok.

Result: From above steps ,printing the sheets are possible.