REVIT_Naviswork_Project- 4

1) Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class

ans)

AIM: To use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in clas

COMMANDS USED:

• C File.
• Export .
• NWC.
• Navisworks.
• View.
• Default 3D view.

PROCEDURE:

QUESTION 2) Use Navigate Tool to walk around the model and walk through the rooms created and record your moving as animation in your Navisworks file.

ANS 2)

AIM : Use the navigate tool to walk around the model and walk through the rooms cheated and record the moving as animation in the navisworks file.

COMMANDS USED :

• Navisworks.
• View point.
• save view point.
• Walk.
• Record.
• Stop.
• Arrow keys for movement.

PROCEDURE :

1. Open the architecture file which we want to export to the navisworks.
2. Now click on view point tool and select save view point option.
3. Save the view with appropriate name and click on enter button.
4. Now select walk option and click the curson where we want to start the walk.

5.Now with the help of arrow keys we can move the view in the project.

6. Now with the help of walk tool we can move to the desired position where we wish and change the design according to our wish.
7. Now we can use the record option and record the walk.
8. The pictures will be saved as frames.

RESULT :

With the above steps we can use navigate tool to walk around the model and walk through the rooms created and record our movings.

3) Use Navigate tool to use Realism feature to walk through the model and record your moving as animation in Navisworks file

ans)

AIM: To use Navigate tool to use Realism feature to walk through the model and record your moving as animation in Navisworks file

COMMANDS USED:

1. realism
2. record

PROCEDURE:

1) export the Revit file to be opened in navies work manage as NWC file

2)open the exported file

3)in the view toolbar select the realism option

4) from the save viewpoint click record

QUESTION 4) Embed both architecture and structure *.nwc file to your Navisworks file. Create a clash detection test between the two models
a. Run the Clash Detection Test
b. Study the clashes between the two models
c. List which of the clashes could be approved
d. List which of the clashes could be neglected ( will be taken care later)
e. List which of the clashes can be resolved
f. Save the results after color coding the clashes to the Navisworks file
g. In case of resolution annotate the clash and save the view to defined views in Navisworks.

ANS 4)

AIM : To create a clash detection test between the architecturaland structural model.

1. Run the Clash Detection Test
   b. Study the clashes between the two models
   c. List which of the clashes could be approved
   d. List which of the clashes could be neglected ( will be taken care later)
   e. List which of the clashes can be resolved
   f. Save the results after color coding the clashes to the Navisworks file
   g. In case of resolution annotate the clash and save the view to defined views in Navisworks.

COMMANDS USED :

• Home.
• Open.
• Append.
• Clash detection.
• Run test.

PROCEDURE :

a)

1. Once we load and open the structure and architecture files we can start the clash test.
2. Go to home menu and select clash detective.
3. Clash detective dialog box appears.

b)

1. Click on add test option.
2. Now select the files which we want to test and click on run test.

c)

We can approve the clashes as the part of construction, these clashes will not be appeared any more. Once we click on approve it turns into green colour.

d)

We can neglect the clashes which will not cause any disturbance to the project.

1. e)

We can resolve the clashes which can change model boundary conditions, we can exclude these clashes from the detective test.

f)

Once we change all the clashes we can save the navisworks file. Now this file is ready and can be sent for review.

1. g)

Now we can annotate and save the place where we can see the clash and can be viewed personally and will be rectified by the design engineer.

RESULT :

Now we will be successful in doing the clash detection test and we can resolve the problems and send the file to the design engineer for corrections.

5) Using the Timeliner feature in Navisworks prepare a schedule for the project developed in week 6 to 8 by adding reasonable assumptions for the task start date and end date and simulate the task completion as a visual simulation. Record it and save the timeline simulation to the Navisworks file

ans)

AIM: To use the Timeliner feature in Navisworks to prepare a schedule for the project developed in week 6 to 8 by adding reasonable assumptions for task start date and end date and simulate the task completion as a visual simulation. Record it and save the timeline simulation to the Navisworks file

COMMANDS USED:

1. time liner
2. selection tree

PROCEDURE:

1)under the home tab click on the time liner icon and a timeline window

2)pin selection tree window

3)add a task in the timeline window

4) to the tasks attach the elements by selecting them and clicking attach

5) assign dates for task

6) in the timeline window click stimulate to see the video for the time liner

7)from save view click record