Radar Mast & Final Assembly of Yacht
YACHT MODEL
objective :
The objective of the project is to design and model all the parts of an yacht and assembling it to create the photo realistic rendering of the yacht.
INTRODUCTION :
The following list is the key parts that will bedealing with under solid modeling using solidworks.
- Blueprint setup
- Modelling of propeller, radars
- Modelling of hull,garage doors
- modelling of rear seats,midddleseats,front seats.
- cration of super structure
- final assembly model of a yacht.
DESIGN METHODOLOGY:
DESCRIPTION :
1. HULL:
The body of a boat is called its hull. At the upper edges of the boats hull are the gunwales. the gunwalves provide extra rigidity for the hull. The cross section of the stern, Where you attach an ouyboard motor,is called the transom.
SKETCH TOOLS ;
Line, Spline,Circle, rectangle, Arc, Slot,
SURFACES - Extruded surface, Revolved surface, Lofted surface, Trim, Fill, Knit, Delete face
FEATURES - Projected curve,chamfer, Fillets, Reference plane, Split, Extruded boss\base, Extruded cut,Mirror
2. SUPER STRUCTURE ;
On water craft, the super structure consists of the parts of the ship or a boat ,including sailboats,
fishing boats,passenger ships ,and submarines,that project above her main deck . this does not usually include its masts or any armament turrets.
SKETCH TOOLS ;
Line,Spline,Circle, Rectangle,Center point Arc, 3D Sketch
FEATURES - Extruded surfaces,swept surface, Ruled surfaces, Kint surface, Trim surface , Extend surface, Filled surface
loft,Revolved,fillet,Chamfer
SURFACE - project curve,reference plane,convert Entities, split, split line
3. propeller;
A Propeller is a device with a rotating hub and radiating blades that are set at a pitch to form a helical spiral which, when rotated, exerts linear thurst upon as working fluid such as water or air.
SKETCH TOOLS,
Spline,Circle, line,revolved boss\base, Lofted Boss\base, Extruded cut, Reference Plane, circular pattern, fillet
3.GARAGE DOOR;
The garage door,like the yacht protection and security from the elements.A boat garage is a storage facility designed to store boats.The options for boat garages will vary depending on the location and destination.They are ideal for keeping the car safe from bad weather and preventing it from any phisical harm.
SKETCH TOOLS - Line,Spline,Circle,text
FEATURES - Extruded Cut,Referance plane,fillet,Shell,Mirror
5.RADAR;
A yacht radar device acts as a major navigation aid for boaters.It helps in detecting boats,birds,landmasses,and weather systems even if the visibility is less than usual.Put simply,radar will show what is around the boat seeing through darkness,precipitation and poor visibility.
SKETCH TOOLS - Line,Text,Circle,point
FEATURES - Extruded Boss/Base,Extruded Cut,Sketch Patten,Fillet,Mirror,Split Line
6.RADARMAST;
Marlne radars are X band or S band radars on ships,used to detect other ships and land obstacles,to provide bearing and distance for collision avoidance and navigation at sea.The radar system on your yacht will alert you to other items in the water that you are not aware of.This system can prevent you from running over a reef or sandbar.
SKETCH TOOLS - Sketch Picture,Line,Spline,Rectangle,Arcs
FEATURES - Extruded Boss/Base,Lofted Boss/Base,Revolved Boss/Base,Swept Boss/Base,Reference Plane,Projected curve,fillet,mirror,dome,shell
7.FRONT SEAT;
This is the standard type of boat seating.Benches are available in a variety of sizes, and they are usually made of marine-grade vinyl that withstands UV rays,rain,wind,and other sea elements.It is easy to clean boat benches.All you need is soap and water, which can be rinsed with a garden hose.
SKETCH TOOLS - Sketch Picture,Line,Spline,Circle,Arcs
SURFACES - Extruded Surface,Lofted Surface,Trim Surface,Filled Surface,Knit Surface,Swept Surface,Revovled Surface
FEATURES - Extruded Cut,Revovled Boss/Base,Chamfer,Fillet,Mirror,Dome
8.MIDDLE SEAT;
The middle seat in our model was placed just behind the superstructure.It is provided with a luxury table to dine out.It can also be used to have casual meetings with co-passengers.
SKETCH TOOLS - Sketch Picture,Line,Rectangle
FEATURES - Extruded Boss/Base,Chamfer,Fillet,Mirror,Reference Plane
9.REAR SEAT;
The rear seat was placed at the end of the deck surface.The rear seat consist of locker racks and steel doors for our stairs. The flag was also placed behind the rear seat since it's the end part of our yacht while having a drink the rear seat was also provided with a slots to rest the glass or mug.
SKETCH TOOLS - Sketch Picture,Line,Spline, Circle,Arcs,Rectancle
SURFACES - Swept Surface,Extruded Surface,Off-set Surface,Filled Surface,Knit Surface,Ruled Surface,Lofted Surface
FEATURES - Reference Plane,Extruded Boss/Base,Revovled Boss/Base,Fillet,Mirror
ASSEMBLY MODEL:
CONCLUSION:
Thus the project Design, assembly and photo realistic rendering of an American yacht was modelled and Rendered successfully.