Challenge

Radar Mast & Final Assembly of Yacht

WWilfred Daniel7 Aug 2022

SUNSEEKER PREDATOR YACHT

OBJECTIVE:

The main objective is to create different parts of SUNSEEKER PREDATOR YACHT and assemble the parts to get a complete YACHT with the help of Solidworks 2022. And we also use Solidworks visualize 2022 to give a realistic look to the yacht

INTRODUCTION:

A Yacht is a power vessel used for pleasure, cruising, or racing. Yachts are mostly built for commercial use or for private use. The Sunseeker International is a British luxury performance motor yacht brand founded by the brothers Robert and John Braithwaite under the name Poole Power Boats in the year 1969. The company’s name changed in 1985.

DESIGN METHODOLOGY:

PARTS TO BE MODELED FOR YACHT

Propeller
Radar
Hull
Garage Door
Front Seat
Middle Seat
Rear Seat
Superstructure
Radar Mast

FEATURES USED:

Split Line:

The Split Line. tool projects an entity (sketch, solid, surface, face, plane, or surface spline) to surfaces, or curved or planar faces. It divides a selected face into multiple separate faces.

Projected Curves:

It is a tool used to form 3D curves from two 2D curves from two different planes.

Extrude Boss/Base:

Extrude tool is used to extend a sketched profile in one or two directions as either a thin feature or a solid feature.

Revolve Boss/Base:

Revolves a sketch or selected sketch contours around an axis to create a solid feature.

Swept Boss/Base:

Sweeps a closed profile along an open or closed path to create a solid.

Extrude Cut:

Cuts a solid model by extruding a sketched profile in one or two directions.

Revolve Cut:

Cuts a solid model by revolving a sketched profile around an axis.

Linear Pattern:

Patterns features, faces and bodies in one or two linear direction.

Shell:

Hollows out a part, leaving open the faces selected and creating thin-wall features on the remaining faces. If no face is selected, it creates a hollow model.

Mirror:

Mirrors features, faces, and bodies about a plane or a planar face.

Combine:

This function adds two bodies together and keep the area that is common to them.

Extrude Surface:

Extrudes a sketch or sketch contours in one of two directions to create a surface feature.

Revolve Surface:

Revolves a sketch or selected sketch contours around an axis to create a surface feature.

Swept Surface:

Sweeps a closed profile along an open or closed path to create a surface feature.

Lofted Surface:

Creates a lofted surface between two or more profiles or sketches.

Boundary Surface:

Creates a surface between profiles that can be a tangent or curvature, continuous in all directions.

Filled Surface:

Patches a surface within a boundary defined by edges, sketches or curves.

Ruled Surface:

Inserts ruled surfaces in a specified directed from edges

Knit Surface:

Combines two or more adjacent non-intersecting surfaces into a single surface body.

PARTS OF SUNSEEKER PREDATOR YACHT

Propeller:

A propeller is a device with a rotating hub and radiating blades that are set at a pitch to form a helical spiral, which when rotated exerts linear thrust upon a working fluid, such as water or air.