Radar Mast & Final Assembly of Yacht

Project report of a yacht

1. Title of the Project – Modelling & Assembly of Yacht and Photorealistic rendering.
2. Objective-

• To Model each part of the Yacht in solid work.
• To assemble all the parts of Yacht in assembly workbench using Appropriate mates.
• Photo Realistic Rendering of the Yacht.

3. Introduction – This is all about the Modelling of Yacht, which is elaborated in detailed form along with the approach followed to develop this model.

1. Design methodology/approach –

5. Description-

• Propeller- Propeller is the mechanism that transmits the power by converting rotational motion into thrust to propel the ship.

Propeller rendered Image

Features used to create Propeller-

1. Sketch
2. Revolve
3. Extrude cut
4. Fillet
5. Loft
6. Circular pattern

• Hull- Hull is the most important Structural part which is the watertight enclosure of the Yacht That protects the cargo, machines, accommodation spaces of the ship.

Hull Rendered Image

Features used to create Hull-

1. Projected curve
2. Surface loft
3. Surface trim
4. Surface extrude
5. Surface Knit
6. Surface fill
7. Shell
8. Extrude boss
9. Extrude cut
10. Sweep boss
11. Revolve boss
12. Fillet
13. Chamfer
14. Linear pattern
15. Mirror
16. Split
17. Combine

• Front Seat, Middle seat & Rear seat- To create seats we have used the following features and commands.

Rendered image of Front, Middle & Rear Seats

Features used to create Seats-

1. Surface sweep
2. Surface loft
3. Surface Extrude
4. Surface Trim
5. Surface extend
6. Surface fill
7. Surface knit
8. Revolve boss
9. Ruled Surface
10. Extrude cut
11. Fillet
12. Chamfer
13. Mirror
14. Combine

• Garage door- The garage door is made by using the saved cut bodies from the hull.

Rendered Image of Garage Door

Features used to Create Garage Door-

1. Extrude cut
2. Shell
3. Fillet
4. Mirror

• Radar-Radar is used for radio detection and ranging to detect objects and their position relative to your position.

Rendered Image of Radar

Features used to Create Radar-

1. Extrude boss
2. Extrude cut
3. Sketch pattern
4. fillet

• Radar Mast- On the radar mast electronic equipment for navigation is mounted.

Rendered Image of Radar Mast

Features used to Create Radar Mast-

1. Extrude boss
2. Revolve boss
3. Sweep boss
4. Fillet
5. Dome
6. Mirror
7. Shell
8. Projected Curve

• Superstructure- It is the control room of the yacht from where the yacht is being operated.

Rendered Image of Superstructure

Features used to Create Superstructure-

1. Line
2. Spline
3. Extruded Boss
4. Surface loft
5. Surface Knit
6. Surface Sweep
7. Boundary Surface
8. Cut Sweep
9. Shell
10. Mirror
11. Split
12. Fillet
13. Reference plane

Assembly and Rendering of the chopper-

1. To assemble the yacht, first started by inserting the hull followed by the superstructure, radar mast, front seal, middle seat, rear seat, garage door, propeller, and radar.
2. Used general mates such as to coincide and concentric mate for garage door and propeller.1. Front of Yacht view

2. Front view of Yacht

• Rendering in Solid works Visualize with Environment

• Conclusion- In this project, we have modeled each and every part of Yacht in solid works and combined them in assembly workbench and to get the realistic image we have done rendering In photo view 360 and solid Works visualize.