Project - A project on design of road from a given topographic data
PROJECT 01
- Point creation and grouping them with the help of description.
STEP-1 CLICK ON FILE THEN CLICK ON NEW AND AUTODESK CIVIL 3D METRIC
STEP 02-THEN MAKE A FILE NAME AND SAVE IN FOLDER
STEP 03 THEN THIS VIEW AFTER SAVE THIS FILE
STEP 04 THEN CLICK ON POINT GO TO IMPORT / EXPORT OPTION AND CLICK POINT SURVEY
STEP 05 AND THEN GO TO PNEZD OPTION SAVE THE POINT NAME
STEP 06 AFTER SAVE THIS POINT NAME FILE THEN CLICK IN THE COMMAND BOX ; Z ENTER AND E ENTER THEN THE POINT SHOW.
STEP 07 THEN CREATE THE SURFACE GO TO SURFACE AND SAVE THE SURFACE NAME .
STEP 08-THEN GO TO THE POINT GROUP AND CLICK ON THE POINT GROUP AND CLICK ON APPLY AND OK
STEP 09 SHOW THIS THE SURFACE VIEW
- Preparation of surface and importance of breaklines.
STEP 10 FOR GEOLOCATION OPEN
STEP 11 AFTER THE GEOLOCATION OPEN THIS VIEW
STEP 12 FOR UNDO THE POINT SO THIS VIEW
STEP 13 AFTER THE UNDO THE POINT SHOW THIS THE VIEW
- Horizontal alignment design and adding super elevation.
STEP 14- FOR ALIGMENT CREATE
STEP 15 SHOW THIS VIEW AFTER ALIGMENT CREATE
STEP 16 SET THE ALIGNMENT
STEP 17
STEP 18
STEP 19 FOR PROFILE MAKING
- Vertical profile design.
STEP 20
STEP 21
STEP 22
STEP 23
STEP 24
STEP 25
STEP 26 THIS IS CUT AND FILL BY PROFILE VIEW AND SLOPE SHOW THE COORDINATE
STEP 27
STEP 28
STEP 29
STEP 30
STEP 31
STEP 32
STEP 33
ALL QUESTIONS ANSWER IN THIS ANSWER I MAKE A POINT AND SURFACE ALIGNMENT AND CURVE CREATE AND CREATE A PROFILE ASSMEBLY AND CORRIDOR AND EARTH WORK VOLUME AND CUT FILL
SURFACE DATA SECTION ETC.