Challenge

Project 2_Creating a 3D rendered model for a Residential Building in AutoCad

AIM - Creating a 3D rendered model for a Residential Building in AutoCad.

INTRODUCTION-

Commands Used:

PROCEDURE FOR THE 2D PLAN-

IMPORTANT TIP - Create a 2d plan using the line command and rectangle commands and assign different layers, then the only thing is to Extrude and provide a realistic view.

In the right left corner click on the settings icon that is the icon of workspace, select 3d modelling.
Enter UN command in the command box and change the type as decimal and select precision as 0.0
Now enter Dim style in command box and modify the settings and select primary units as decimal and give precision as
0.0
Select line command and draw in top or 2D mode.
Trim the unwanted corner lines and Offset 230 for wall, Offset 5000 for bedroom in X direction and 5000 in Y direction, 230 for wall.
offset 5000 in X direction and offset 3500 in Y direction for kitchen + dining and 1000 for was basin and Offset 2000 in X and 2000 in Y direction both for bath and WC. All walls are 230 mm thick.
Size of window is 1500 X 1500.
Size of doors are 1000 X 2100 and 1200 X 2100.
Landing width is 1000
Tread is 300 and rise is 150.

PROCEDURE THE 3D PLAN.

Change the view using the 3DO command.
Select 3d modelling.Command boundary and in that select region.
Create boundaries as well as regions of the plan.
Extrude the regions that are the walls to the height of 3000 from bottom.
Floor to floor height of the building is 3000.
Create different type of layers using layer properties like 3D walls, window frames, slab, window glass etc as desired and assign colors to each layer separately
Extrude the windows and doors to the suitable depth.
Rotated 3D is used to rotate the objects as in windows and doors.
Move and copy command is used to move the windows to their desired locations.
Command polyline at the terrace and create the parapet wall at the top of the building.
Command polyline and create the plinth of the building of 600 at the bottom.
Create the staircase and extrude it to the distance of 1200.
Create the mumty separately and place it on the top of the building.

RESULT:

RENDERING

Go to the visualize tab from the Ribbon.This will give access to the panels like light, sunlight, Camera, Animations, Render and Views.Create different views using the camera anf render the building.

RENDERED VIEW

Ship work like this
in your own course.