Project 2_Creating a 3D rendered model for a Residential Building in AutoCad

AIM : TO CREATE A 3D RENDERED MODEL FOR RESIDENTAL BUILDING IN AUTOCAD 

INTRODUCTION : Command used for drawing the 3d rendered view of building are as follow 

• EXTRUDE 
• SWEEP 
• UNION 
• SUBTRACT 
• INTERSECT 
• REVOLVE 

PROCEDURE

1. Open autocad 
2. set units and limits 
3. Set limit 0,0 and 100, 100
4. put command  XLINE for making plan 
5. After taking XLINE now we take offset for creating outer walls of 230 and inner wall 150 
6. Now we take offset of 5000 and 5000 for bedroom and 150 for inner wall 
7. THen we take offset also offset of 5000 and 4500 and 230 outter wall
8. Take 3000 for steps 
9. Take 2000 for washbasin and 2000 for toilet 
10. Line command used for making window and doors 
11. Size of window 1500 and 1500 
12. Size of door are 1000 x 2100 and 1200 x 2100
13. Landing width 1000 
14. Tread is 300 and riser is 150 
15. Use MTEXT command for given name to plan 

STEP FOR CREATING THE 3D PLAN 

1. Fist we use SW isosemtric view to see plan in 3d 
2. Now after the we use boundary command to create boundary in plan 
3. After creating boundary we use EXTRUDE command to make a wall and creating window 
4. We use triangle command to make window 
5. Using Different colurs to show different part of building 
6. We use extrude command to make a good depth of window and doors 
7. Command polyline at the terrace and create the parapet wall at the top of the building 
8. Create the stair case and use extrude command at the distance of 1200
9. Creat mummty separately and place over it 

STEP FOR RENDERING 

1. Go to the visualize tab from the ribbon 
2.  This will give access to the panels like light , sunlight , camera , animation , render and views 
3. Create different views using the camera and render the building 
4. place the lights at the desired location 

RESULT :

The drawing are made acc to dimension and following all the details