Project 1-Meshing of Rear Wheel Holder challenge

OBJECTIVE

• To mesh the given component of a car with given quality parameters and to assign thickness.

PROCEDURE

• Geometry was imported @IMPORT>FILES>IMPORT>GEOMETRY>ALL>IMPORT.
• Delete solids @DELETE>SOLIDS>SOLIDS>ALL/DISPLAYED>OK>DELETE ENTITY.
• Midsurface was extracted using @GEOMETRY>MIDSURFACE>AUTO-EXTRACTION>SURF.>ALL>EXTRACT>OK.
• Auto-cleanup was performed before meshing @GEOMETRY>AUTOCLEANUP>EDIT>CRITERIA>SURF.>ALL>SELECT>AUTOCLEANUP.
• Then mesh was deployed using @2D>AUTOMESH>SURF.>MIXED>MESH and also used @2D>SMOOTH>ELEMENTS>ALL>ITERATION (1000)>SMOOTH.
• After meshing quality index criteria was applied using @2D>QUALITY INDEX>PAGE 4>EDIT CRITERIA>INPUT VALUES>APPLY>OK.
• Cleanup tools were used at quality index for modification of elements.
• Elements were projected to the surface using @TOOLS>PROJECT>TO SURFACE>select ELEMENTS>select SURFACE>PROJECT.
• 'Edges' were checked and 'Equvi' was applied and also @TOOLS>NORMALS>DISPLAY>ADJUST.
• Then, geometry was 'Exported' @FILE>EXPORT>choose file>rename as needed>EXPORT.

SCREENSHOTS

• @Sample 1, Imported the geometry.
• @Sample 2, After performing needed cleanup and edits as required.
• @Sample 3, Mid-surface was extracted.
• @Sample 4, Again necessary edits and cleanup were done (autocleanup).
• @Sample 5, Mesh was depolyed following the given quality criteria's.
• @Sample 6, Normal was checked and adjusted.
• @Sample 7, Final model image before exporting.

All necessary screenshots have been attached along with the final model file.