Project 1 _Creating an Architectural plan for the provided plot size and develop relevant basic structural drawings

1, Ans :

AIM :

• Create the Plan , elevation and Sections . Use proper dimension techniques and dimension styles to document the project. Assume the sizes of the doors and windows as per construction standards.

INTRODUCTION :

• Draw the building plan , elevation and section and also Building inner structural details beam and footing using Autocad commands ( line, trim, offset, rectangle, mtext , Dstyle and Dimensions) with given dimensions.

Procedure :

• There are above 5 diagrams are given the building plan , elevation and section and structural footing and beam details of the building.

Diagram 1 :

Plan :

• Draw the plan in the size of 60' *20' with east facing
• Draw the xline in vertical and then offset of 60' in x axis and draw the line xline horizontal and offset of 10'
• After the draw the bedroom , kitchen , study room with in the building
• After that the inner dimension of the room are drawn using line command and offset some of the crossing lines are cut using Trim command
• Window dimensions are assumed by user to draw manually there are three types of window provided with various size which can be drawn using line command
• Hence the plan is drawn using all commands

Diagram 2 :

Elevation :

• Draw the line in ground level in xline
• Offset of line 3' for the sillevel from the ground level line
• Then offset of line 10' from the ground level
• Offset of line 4.0 from roof bottom to slab top.
• Hence the elevation Drawn.

Diagram 3 :

Section :

• Cut the building to view the cross section of the inner building.
• Draw the view of the section using line and offset command
• And also draw the what are the thing we can view from the section view .
• Hence the section drawn.

Diagram 4 :

Footing and column :

• Draw the outline of the building and draw the footing and column with standard dimensions.
• Footing of size 4' *4' feet and column of size 2'*2' feet.
• Draw the Grid lines along the column to view the Grid lines crossing the column.
• Hence Footing and column is drawn

Diagram :

Beam Details :

• Draw the outline of the building and draw the footing and column with standard dimensions.
• Draw the beam details of size 1'6 *1' with name PB1.
• Hence the beam details are drawn.

Result :

• From the above procedure all diagrams are drawn proper dimensions and mensioned line style with proper allignment , All the diagrams are drawn using Xline , Mtext, layer, copy, trim this are the some main command used in to draw the above diagrams.hence all diagrams are drawn.