Introduction to REVIT concepts
Aim & Introduction:- introduction to REVIT software
Procedure:- Draftiing and design using revit
Q1) From the file menu, create a new project (Structural / Architectural / Construction template ) and name the project appropriately
Ans:-
Step I :- double click on REVIT software.
Step II :- click on new model and select sutable template heare i will use Architectural template and select new project.
Step III :- new project file has been open
Step IV :- click on file and select save option
Step V :- give name of project and select destination folder where we want to save project after that press save project.
2) Save the new project file. Close and open using icons from file toolbar
Ans:-
Step I :- click on file and select save option
Step II :- give name of project and select destination folder where we want to save project after that press save project.
Step III :- click on file and select close option.
Step IV:- double click on REVIT software.
Step V :- select open and chose your destination folder where your file save.
step VI:- doble click on selcted file. your project will be open.
3) From the architecture/ structure toolbar familiarize with options to draw a wall. Create a rectangular layout of walls of about 40’-0” X 35’-0”
Ans:-In this Question we need to create architecture/ structure template and create rectangular layout of walls of about 40’-0” X 35’-0”
Step I:- double click on REVIT software.
Step II :- select open and chose MY destination folder where my project file saved.
step III:- doble click on selcted file. my project has been open.
step IV:- click on architecture tab heare we seen wall option click on wall option
step V:-under the wall option i will selct line command to draw wall
step VI:- Create a rectangular layout of walls of about 40’-0” X 35’-0” using wall option under the architecture tab
4) From the Annotate toolbar use the aligned option to add dimensions to the layout
Ans:- here we use already create project in Q3 to add dimensions to the layout
Step I:-open rectangular layout of walls
step II :- click Annotate Tab here we will give three dimension linear, Aligned, Angular
step III :- we can chose any one from linear, Aligned, heare i will chose linear dimension
5) Use the properties browser to switch to different wall types.
Ans:- in this question we need switch to different wall types using properties browser. here we use already create project in Q3
Step I:- click on any wall
step II:- at property browser we will give various wall type
step III:- we can choose from any one heare i will choose 12" thick wall
6) Create a 3D view from the view toolbar and save the view with the appropriate name
Ans:- in this question we need Create a 3D view from the view toolbar . here i will use already create project in Q3
Step I:- open defolt 3d view
step II:- using view cube create various view
Step III :- right click view cube and select save view with the appropriate name.
7) Navigate through the 3D model using the view cube. Orbit/pan through the model layout created
Ans:- in this question we need to Navigate through the 3D model using the view cube. here i will use already create project in Q3
Step I:- click on navigation bar we have orbit, zoom, Rewind, PAN
step II :- click on orbit we can rotate 3d view in 360 degree
Step III:- click on zoom we can zoom in and zoom out using this navigation
Step IV:- all remainig option we can use as per requirement.
8) Use the visibility settings option below to switch model to shaded, realistic, hidden lines options
Ans:- in this question we need to switch model to shaded, realistic, hidden lines options. here i will use already create project in Q3
Step I:-clik visual style at botom tolbar
step II:- here we will give wireframe, hidden line, shaded, realistic
step III:- we can switch model to shaded, realistic, hidden lines options.
9) Turn the sun path on and off to view shadings in the layout created
Ans:- in this question we need to Turn the sun path on and off to view shadings in the layout created. here i will use already create project in Q3
Step I:-clik sun path which is available at botom tolbar
step II:- we can change sun stetiing as per standerd.
10) Use the Manage toolbar to enter project settings, project name, and project issue date (choose according to your convenience).
Ans:- in this question we need to Manage project settings, project name, and project issue date using Manage toolbar. here i will use already create project in Q3
Step I:- click on project information under manage tab.
step II:- we can edit information
step III:- click ok in this way project information will be update.
11) Why do you need the Collaborate tab in Revit? How it supports modeling and its efficiency
Ans:- collaboration tab in revit the name is work sharing. thrrough work sharing uses on same loacal area neat work we can work together on same revit model thats why we need to use Collaborate tab in Revit.
Collaborate tab are help to work together, cloud sharing, work sharing, central model.
for work together multiple revit model can we link together that allowing to work together from diffierent places
for cloud sharing multiple people allowing work together in a single project without any disturbancy
for work sharing creating central model from exesting project
12)What is the Analyze toolbar used in Revit? How it is beneficial for design and modeling
Ans:-analyze tolbar can be used to structural alalysis of building