Door Arm Rest Week 8 Challenge

1. what is design methodology ? The design meethodology contains: purchase order- In this the customer places the order to start the project. Input from the customer- Functional requirment- Prefered standard component Car product Layout Ergo data Weld study Standard detaling templet percentage completion criteria The percentage…

1)What is the process of project execution activity?                         1)RFQ received - This is the first step in any project. RFQ (Request for Quotation). In this customer specifies his requirements, specifications etc. in form of documents or…

What is BiW & define its parts? The stage in automotive design or automotive manufacturing in which the car body sheet metal components are been assembled by welding and by other joining process. Body-in-white (BiW) is the name given to a car body’s sheet when all its components—barring moving parts (e.g.,…

DESIGN AND DEVELOPMENT OF DOOR TRIM PANEL RH   Objective: The main objective of this project is to work on design and development of the door trim panel RH using Catia V5.   Introduction: The door trim panel of the right-side front door consists of different parts, they are all fixed together, giving out the…

DESIGN AND DRAFTING OF THE QUICK RETURN MECHANISM AND THE CV JOINT   Objective: The main objective of this project is to design and draft the quick return mechanism and the CV joint using Catia V5   Introduction: The quick return mechanism is used in the place where is quick return of the tool is needed while…

CREATION OF CLASS A, B & C SURFACES, DOGHOUSE ,4-WAY LOCATORS AND DRAFT ANALYSIS FOR B-PILLAR   Objective: The main objective of this project is to create class A, B & C surfaces, doghouse, 4-way locators and the draft analysis for the B-pillar using Catia V5.   Introduction: The dog house is also a feature…

CREATION OF CLASS A, B AND C SURFACES, TOOLING AXIS, LOCATORS, HEATSTAKES AND DRAFT ANALYSIS FOR DOOR APPLIQUE   Objective: The main objective of this project is to create the class A, B and C surfaces, tooling axis, locators, heat stakes and the draft analysis for the Door Applique using Catia V5.   Introduction:…

CREATION OF SCREW BOSE, DOGHOUSE AND DRAFT ANALYSIS FOR COIN HOLDER   Objective: The main objective of this project is to create screw Bose, doghouse and the draft analysis for the Coin holder using Catia V5.   Introduction: The screw Bose is used as a feature in this coin holder to fix it to the mating component…

CREATION OF RIBS & ANALYSIS AND DRAFT ANALYSIS FOR COIN HOLDER WITH RIBS   Objective: The main objective of this project is to create ribs & analyze and the draft analysis for the Coin holder using Catia V5.   Introduction: The ribs play an important role in designing and manufacturing a component, the…

CREATION OF CORE & CAVITY DESIGN AND DRAFT ANALYSIS FOR SWITCH BEZEL   Objective: The main objective of this project is to create the core & cavity design and the draft analysis for the Switch Bezel using Catia V5.   Introduction: The draft analysis will show the important angles of the body, it is very…

CREATION OF CLASS A, B AND C SURFACES, TOOLING AXIS AND DRAFT ANALYSIS FOR COIN HOLDER   Objective: The main objective of this project is to create the class A, B and C surfaces, tooling axis and the draft analysis for the Coin holder using Catia V5.   Introduction: The tooling axis is very important for the…

CREATION OF TOOLING AXIS AND DRAFT ANALYSIS FOR ARM REST   Objective: The main objective of this project is to create the tooling axis and the draft analysis for the Arm rest using Catia V5.   Introduction: The tooling axis is very important for the component to be manufactured, keeping that tooling axis as reference…

CREATION OF TOOLING AXIS AND DRAFT ANALYSIS FOR SWITCH BEZEL   Objective: The main objective of this project is to create the tooling axis and the draft analysis for the Switch Bezel using Catia V5.   Introduction: The tooling axis is very important for the component to be manufactured, keeping that tooling axis…

CREATION OF TOOLING AXIS AND DRAFT ANALYSIS FOR PLASTIC BASE BRACKET   Objective: The main objective of this project is to create the tooling axis and the draft analysis for the Plastic base bracket using Catia V5.   Introduction: The tooling axis is very important for the component to be manufactured, keeping that tooling…

CREATION OF TOOLING AXIS AND DRAFT ANALYSIS FOR FAN COVER   Objective: The main objective of this project is to create the tooling axis and the draft analysis for the fan cover using Catia V5.   Introduction: The tooling axis is very important for the component to be manufactured, keeping that tooling axis as reference…

DESIGN OF CAR BACKDOOR USING NX CAD   Objective: The main objective of this project is to design the backdoor using the engineering parameters and dimension criteria for the standard backdoor design.   Introduction: Back door assembly is the placed at the backside of the car, which is made up of steel or aluminum…

DESIGN OF CAR ROOF USING NX CAD   Objective: The main objective of this project is to design the Roof using the engineering parameters and dimension criteria for the standard Roof design.   Introduction: Roof is the top most region of the vehicle which covers the inner cabin, it is welded to the pillars of the…

DESIGN OF FRONT FENDER USING NX CAD   Objective: The main objective of this project is to design the front fender using the engineering parameters and dimensions for the fender design.   Introduction: Fender is the sheet metal part which is used at the front and back sides of the car, there are two fender’s…

Calculation of section modulus for the hood design   What is section modulus? Section modulus is geometric property for a given cross section used in design of beams or flexural members. In simple it is the ratio of total moment resisted by the section to the stress in the extreme fiber, it is totally determined to…

DESIGN OF CAR HOOD USING NX CAD   Objective: The main objective of this project is to design the hood using the engineering parameters and dimension criteria for the standard hood design.   Introduction: Hood is the usually used in the front of the vehicle for the closure of the front engine compartment, the…

UNDERBODY COATING   What is underbody coating? Underbody coating is a process which provides a long-term protection from corrosion to the underbody of the car. It also plays a major role in protecting the body parts like Frame rails, internal body panels and the other inner cavities that are not physically or easily…

BENCH MARKING    What is bench marking? Benchmarking is the process of comparing the products, processes and services against those of organizations which are known to be leader in one or more aspects of their operations. Benchmarking gives the required insights of how to make you understand your organization…

DESIGN OF SHEETMETAL BRACKET-II USING SIEMENS NX CAD   Objective: The main objective of this project is to design the sheet metal bracket-II using the siemens NX CAD software.   Introduction: Siemens NX CAD is a software which is used for design features like modelling, sheet metal, shape studio, drafting etc. Its applications…

DESIGN OF BOX ASSEMBLY USING SIEMENS NX CAD   Objective: The main objective of this project is to design the box assembly using the siemens NX CAD software.   Introduction: Siemens NX CAD is a software which is used for design features like modelling, sheet metal, shape studio, drafting etc. Its applications…

DESIGN OF SHEETMETAL BRACKET USING SIEMENS NX CAD   Objective: The main objective of this project is to design the sheet metal bracket using the siemens NX CAD software.   Introduction: Siemens NX CAD is a software which is used for design features like modelling, sheet metal, shape studio, drafting etc. Its…

DESIGN OF SHEETMETAL ODD SHAPED ENCLOSURE USING SIEMENS NX CAD   Objective: The main objective of this project is to design the sheet metal odd shaped enclosure using the siemens NX CAD software.   Introduction: Siemens NX CAD is a software which is used for design features like modelling, sheet metal, shape…

DESIGN OF SHEET METAL CASING USING SIEMENS NX CAD   Objective: The main objective of this project is to design the Sheetmetal casing using the siemens NX CAD software.   Introduction: Siemens NX CAD is a software which is used for design features like modelling, sheet metal, shape studio, drafting etc. Its applications…

MODELLING AND VISUALIZATION OF AN YACHT USING SOLIDWORKS   Objective: The main objective of this project is to model the required parts for the Yacht, assemble all the parts and render the assembled yacht with the help of solidworks visualize.   Introduction: Solidworks is a software which is used for planning,…

MODELLING AND VISUALIZATION OF AN AMERICAN CHOPPER USING SOLIDWORKS   Objective: The main objective of this project is to model the required parts for the American Chopper, assemble all the parts and render the assembled chopper with the help of solidworks visualize. Introduction: Solidworks is a software which is…