Challenge

Creation of Multiple viewports, Scaling the drawing and setting in Template in AutoCad

AIM:TO CREATE THE FLOOR PLAN AS PER THE GIVEN DETAILS.

INTRODUCTION : THE GIVEN FLOOR PLAN CONTAINS THE 7 BEDROOMS,STAIRCCASE ACCESSIBILITY ETC.

PROCEDURE:

GO TO START MENU,SELECT INSTALLED AUTO CAD VERSION LIKE 2023.
CLICK ON START DRAWING.
GO TO CREATE NEW DRAWING.
THEN NEW TAB WILL OPEN AND IT SHOWS FOUR ICONS.
USE THE DEFAULT METRIC SETTINGS
OPEN THE TEMPLATE AS ACAD.DWT
THEN NEW DRAWING TEMPLATE IS CREATED AND SET THE LIMITS AND PRESS ENTER.
THEN WRITE ZOOMIN IN COMMAND TAB AND PRESS ENTER,TEMPLATE IS CREATED .
USING UNITS IN COMMAND TAB,SELECT THE UNITS YOU ARE GOING TO DRAFT.
WRITE LINE IN COMMAND TAB AND PRESS ENTER.
PLACING THE COLUMNS OF GIVEN SIZE ON SHEET.
BY ASSUMING WALL THICKNESS EXTERNAL 230MM AND INTERNAL 150MM.
BY USING THE LINE COMMAND AND TAKING THE COLUMNS REFERENCE ,CREATING THE GIVEN ROOMS.
AFTER CREATING THE ROOMS USING TEST COMMAND WRITING THE NAMES OF ROOMS.
CREATING THE DOORS IN THE REQUISITE POSITION USING CIRCLE COMMAND FOLLOWED BY TRIM COMMAND TO OBTAIN DOOR SHAPE.

RESULT:BY FOLLOWING THE ABOVE PROCEDURE THE TABLE CONTAINING THE DIFFERENT CONTENTS IS OBTAINED.

Ship work like this
in your own course.