Creating Walls, Partition walls and Floors for a residential layout using REVIT

1. AIM

TO create a floor plan and need to apply the materials and thickness using the property browser to align the floor plan

with grids created from week 2

INTRODUCTION

• Beildig material is material used for controction. many 00naturally occuring substances, such as clay, rocks, sand, and wood, even twigs and leves, have used to construct buidings
• Apart from naturally occurring materials, many man-made products are in using, some more and some less synthetic.
• floor plans are the most critical element of yous house plans drawn to scale and show rooms spaces, and phyysical features work in the relation to each other within the home.
• the're plans show the exteent to which a space will woork for its intend purpose.

PROCEDURE

STEP-1

• First, we select the floor as shown below.
• after seletng the floore, click the edit type from the properties browesr, as shown below.

STEP-2

• after licking the edit type, the type properties tab will be visible on the screen, shown below.
• next we chhange the materiyall type by clicking the edit option as shown below.

step-3

• After clicking the edit option , the edit assembly tab appears
• we slct the material type in 2nd room as shown below
• After clicking that, the material browser appers, then select the material type as concrete, cast-in-place as shown below.

STEP-4

• Finaly, the materrial is appliied to the floor as shown below.

STEP--5

• Next floor pllan is aligned to the grids, as shown in the belw figgure.

RESULT

• The materials are applied to the floor and the floor plan is successfully aligned with the grids

2. AIM

To create a floor plan and need to apply the materials and thicknees using the property browser for walls;

veriy using the property browser to see if the top and boottom of the walls are constrained.

INTRODUCTION

• Walls are arguably one of the most important elements of eny building.
• building material is materiyal used for controtion.
• apart from naturally-occurring materials, many mam-mode products are in use. some more and some less synthettic.

PROCEDURE:

STEP-1

• First, we select the wall as shown below.
• After seleting the wall click the edit type from the proprties broweser, as shown below.

STEP-2

• After click in the edit option , the edit assembly tab appears.
• We select the material type in 2nd room as shown below.
• after clicking that, the material browser appears, then select the materials type as brick, soldier course as shown below.

STEP-3

• After appling the material to the walls, we need to zoom the wall to see the material type very closely, as show below.

STEP-4

• Finaly, the mateerial has been applied to the walls as showe below.

STEP-5(ausweer for a,b)

• based on your observation, what is benefical for conneting walls with associated levels rather than being unconnected.
• if we select the top constraint as up to level: level-2 the height of the changes with the levels.
• when we put the level height too the 20: then hight of the wall is also changes to the 20, as shown below.
• the height of level is changed and the height of the wall is also changes, as shown on the below figere.
• when we put the level height to the 20, the only level height to the is chenging the wail height will not be changed.

RESULT

Successfully applied materials to the walls.

3.AIM

Use modify tab to utilize copy and paste options to align elements to a differet level

INTRODUCTION

• Floor plans are the most critical elemet of your house plans drawn to scale and shown from above, flooer plans illustrate how rooms, spaces and physical features work in the relation to each other withen the home.
• floor plans show the extent to which a space will work for its intended purpose

PROCEDURE

STEP-1

• FIRST, we select the total ground floor, then we ground floor is copied to clipboard.

STEP-2

• Next use paste option to allign the selected objects to levels

STEP-3

• Finally, the elements are aligned to deffert levels

RESULT

THE elements are successfully aligned to differt levels using copy and paste options.

4.AIM

To create separate rooms within your residential unit using the interior partition walls.

INTRODUCTION

• IN the walls that make for division or privacy in the interiror portion of a building and not carried the colling load and floor land that would make with bricks, glass or other more materials are called partition walls
• itt has many types likke types
• partition wall connets the floore and ceiling

PROCEDURE

SETP-1

• First select the interior walls and change the wall types and name it as partition wall

STEP-2

• the interior partition walls are created

RESULT

The interior partition wall are created successfully.

5. AIM

TO insert the components in appropriates to add details to the residention model, based on the work challenges-2

INTRODUCTION

• The residential model components are furniture set couch table, TV desk shelf cabinets, bed set shell, lighting individual study desk chair, both tub and plumbing fixtures discusseed in class.
• coming to the 3d modeling in the revit, these components are present in the library and we need to insert them into the model.

PROCEDURE

STEP-1

• Placing the door and windows in proper position.

STEP-2

• SELECT THE CAMERA AND place in the plan, as shown below figure
• fast we insert the furniture componets in the hall as shown below.

STEP-3

• INSERT the dinner hall componets from the library as dining table with chairs, as shown below figure

STEP-4

• INSERT the bedroom components from the library as bed set, lighting, study dest with chair, as below figure

STEP-5

• INSERT the kitchen components from the library, as countertops, gas stove, sheles to store food items as shown below figure

STEP-6

• Insert the storage room components from the libbrary, washing machine and shelves to store cloths as shown below figure

RESULT:

All the components are inserted from the library successfully using revit software.