Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad
AIM:TO CREATE THE LAYOUTS OF KITCHEN AND CREATING THE HATCHING PATTERN WHEREVER IT IS REQUIRED..
INTRODUCTION : THE GIVEN LAYOUT CONTAINS THE KITCHEN,COUNTER POSITION,FRIDGE POSITION,MICRO OVEN POSITION ETC.
PROCEDURE:
- GO TO START MENU,SELECT INSTALLED AUTO CAD VERSION LIKE 2023.
- CLICK ON START DRAWING.
- GO TO CREATE NEW DRAWING.
- THEN NEW TAB WILL OPEN AND IT SHOWS FOUR ICONS.
- USE THE DEFAULT METRIC SETTINGS
- OPEN THE TEMPLATE AS ACAD.DWT
- THEN NEW DRAWING TEMPLATE IS CREATED AND SET THE LIMITS AND PRESS ENTER.
- THEN WRITE ZOOMIN IN COMMAND TAB AND PRESS ENTER,TEMPLATE IS CREATED .
- USING UNITS IN COMMAND TAB,SELECT THE UNITS YOU ARE GOING TO DRAFT.
- WRITE LINE IN COMMAND TAB AND PRESS ENTER.
- CREATE THE ANOTHER LINE OF WALL THICKNESS OF 230MM USING OFFSET COMMAND AND PRESS ENTER.
- CREATE THE LINES USING OFFSET COMMAND IN ORDER TO CREATE GIVEN SPACE FOR MATERIALS.
- INSERT THE HATCH WHEREVER REQUIRED .
- CREATE THE DOOR USING BLOCK COMMAND AND INSERT IN THE GIVEN POSITION.
RESULT:BY FOLLOWING ABOVE PROCEDURE THE KITCHEN LAYOUT HAVING COUNTER,ENTRANCE ACCESSIBILITY,SPACE FOR VARIOUS MATERIALS ARE FORMED.