Creating Architectural and Structural model with 3D rendering using REVIT
Kindly Due revit file capacity is more than 3gb the file is not uploading, so i had attached png files.
Aim & introduction:- I have created multistoried buildings of 2 towers comprising of 6 aparments of mixed 3 bhk @ 2bhk of 12 floors for each tower with parking at groung floor. the plot size is 60x70 mt leaving 9.0 mtr road alround the towers. I had provided 2 lifts, 2 staircase per floor. I had provided 8' wide passage for apartments. I had provided ducts for plumbing near to toilets. Electrical shaft at lift. For each flat puja room. In made plan for 9'' wall for external & internal 6'' walls. floor to floor height of 3.2 meter.
1) First of all create 2d plan of tower leaving all road margins. Make the plan for each apartments give passage entry of 8 feet, staircase lift,ducts for plumbing. Import the 2d plan to revit keep settings for center to center & origin, layer on , pin the 2d drawing so that it does’nt moves while assigning walls. Set units to meter. Now set level 0.0 as road, building parking floor height rise of 0.75 meter. Assign floors of 3.2 meters for 12 floors. Now assign 9'' walls for external & 6'' for internal for about height of 3.2 mt for each apartment. Now assign doors ,windows & ventilators for bed rooms, toilets. Assign slab to for first floor. 100mm thick pcc for flooring for parking. Assign Rcc retaining wall for lifts. Create room bounderies for each room, room tag, room measurements . Give measurements to each room using annotate tab. Now assign vitrified flooring of 50mm thick on slab edit boundaries for duct opening, staircase opening. Now assign 60mm thick flooring for parking area, edit boundaries for plumbing ducts & staircase. Now assign staircase of 1.295 mt wide & 1.22 meter wide for first floor (riser - 0.16, tread - 0.275mtr). Assign pipe or glass railing for stair case. Assingn furniture elements like bed, sofa, dinning table, fridge, coffe table, dressing wardrobe, shelves, desktop, chair, kitchen platform, plumbing fixtures, washing machine, stove, sink, wash basin. Now assign curtain wall at passage side at staircase landing create grids assign mullions. Assign railing to balconies. Create grid lines for walls, lift walls 1,2,3 for x axis & A,B,C for y axis.