Creating a Wardrobe detailed drawing, Floor Plan, Kitchen Layout and Column Detail using AutoCad

1. Draw the elevation and details of a wardrobe as shown in the Figure below. After sketching, you need to provide the dimensions and text with the use of layers. Use proper text styles and dimension methods to document it. Also, assume dimensions, wherever needed.

Note: All dimensions are in mm.

AIM: To draw the elevation and details of a wardrobe as shown in the Figure below.

cammand used:

• line
• offset
• hatch
• dim
• layer
• trim

Procedure:

Result:The given elevation and details of a wardrobe as drawn by using auto cad

Q2. Draw the floor plan as shown in the Figure. Use the proper drafting tools to sketch the plan. Do not hatch or draw the furniture. You need to draw the floor plan with the following:

Note: You can also import the Floor_Plan.pdf into your current drawing and start working on the project. You need to scale the imported pdf file using reference option. All dimensions are in mm.

1. Walls (Exterior and Interior)

Wall Thickness: Exterior Wall- 230mm, Interior Wall: 150 mm (Wherever Required)

2. Doors and Windows: Assume the size of the doors and window.

2.1 Stairs: Tread-300mm, Riser-150mm

3. Insert Text wherever required
4. Insert the dimensions using proper dimension techniques

AIM:To draw the floor plan as shown in the Figure

cammands used:

• line
• offset
• hatch
• dim
• layer
• trim
• grid lines
• text

Procedure:

Result:The given floor plan as drawn by using auto cad.

Q3. Create the Kitchen Layout as shown in the Figure below. Also, use proper dimension techniques to dimension the kitchen layout. Also, insert text wherever required. All dimensions are in mm.

AIM: To create the Kitchen Layout as shown in the Figure below

Cammnads used:

• line
• offset
• hatch
• dim
• layer
• trim
• text

Procedure:

Result:The given Kitchen Layout drawn by using auto cad

Q4. Sketch the column details as shown in Figure. Insert dimensions and text in the figure. Refer to the bar sizes from the schedule.

8mm ---- 0.31 Inches

25mm--- 1 inches

16mm—0.62 inches

AIM: To sketch the column details as shown in Figure.

Cammands used:

• line
• offset
• trim
• text

Procedure:

Result:The given column details as drawn byn using auto cad

Q 5. Draw the Raft Layout as shown in the Figure. Assume the column size as per your knowledge. You can take the sizes as: 24”x24”, 9” x 24”, 9” x 18”, and 9’ x 24”. You can import the raft_foundation.pdf to ensure the missing dimensions.

AIM: To draw the Raft Layout as shown in the Figure

Cammands used:

• line
• offset
• hatch
• dim
• layer
• trim
• layer
• text
• grid lines

Procedure:

Result:The given Raft Layout as drawn by using auto cad