Advanced Sheet Metal Design Using NX Cad Challenge_6_Bracket
Project: Advanced Sheet Metal Design Using NX Cad Challenge_6_Bracket.
Introduction
Sheet Metal is metal formed by an industrial process into thin, flat pieces and it can be cut and bent into a variety of shapes. Sheetmetal is a comprehensive cold working process for metal sheets usually below 6mm, including shearing, punching/ cutting/ folding, riveting, splicing, etc.
In the Sheet Metal application, we can create uniform thickness sheet metal parts using basic features such as flanges, tabs, and jags. We can also do close corners, cutout, and stiffening features.
This project is to Bracket, by creating the solid model and wrapping the sheet metal over the solid surface. Then we need to add the features to the wrapped sheet metal. This involves leveraging NX's sheet metal features, such as Counter Flange, Normal Cutout, Break Corner, Unbend, Bead, Rebend and Hole to create the desired Bracket.
Process
The sheet metal Bracket has been designed with the below mentioned flow chart process.
Flow Chart
Contour Flange: This command is used to create a base feature by extruding a sketch along a vector or adding material by sweeping a sketch along an edge or a chain of edges. It can be used to create complex bends and shapes in the sheet metal part.
Base Sketch
Contour Flange
Normal Cutout: The normal cutout feature cuts the material by projecting a sketch onto the model and then cutting perpendicular to the faces intersected by the projection.
Sketch Normal Cutout
Normal Cutout
Break Corner: It creates Rounds or chamfers in a sharp corner of a tab or a flange.
Break Corner
Unbend: This command is used to unbend the sheet metal. The punching operation can be performed only by unbending the sheet metal.
Unbend
Bead: Bead is another punch tool used to create embosses over the sheet metal body w.r.t. the sketch created in the specific plane.
Bead Sketch
Bead
Rebend: Rebend feature is used to get the original bend shape after performing operations like a dimple, bead, etc. It's a tool to get the flanges of the sheet metal body into its original position that flattened with unbend tool to create some some complex structure on the sheet metal body.
Rebend
Hole: This feature adds a hole to one or more solid bodies in a part or assembly with options for counterbore, countersink, or threaded.
Hole Sketch
Hole
Drafting: It is possible to create a 2D drawing from a 3D model using the NX Drafting application. With the 3D model opened in NX, go to application than Drafting, this disables the sheet metal application and starts the drafting application.
Drawing Sheet
Isometric View
Front View
Top View
Side View
Conclusion
By designing this Bracket, we have understood and learnt different tools such as Counter Flange, Normal Cutout, Break Corner, Unbend, Bead, Rebend and Hole on Siemens NX CAD. The dimensions as provided were followed during the designing of Bracket on software.