Advanced Sheet Metal Design Using NX Cad Challenge_6_Bracket

NX_Bracket_Tokala Dharshan Kumar:https://drive.google.com/file/d/11rN-GNIeZAhj6PHpR4bp5-0vNm5yW8_Q/view?usp=sharing

BRACKET

• Select the XZ plane and select Profile command and start sketching profile lines and Arc and give certain dimensions then say OK.
• Select Contour flange command and select all of the curves along with certain thickness and width options and directions, at last say OK for contour flange command.
• After this select the top view of the sketch and start sketching lines on the XY plane with the help of Line command. Draw certain lines with certain dimensions and say OK. Now, select the normal Cutout command and select the sketch lines we created earlier also select all the other parameters such as cut method limits and also the depth then say OK.
• The next step is to break the corners of the sheet metal using Break Corner command. Break each corner of the sheet metal with difference break properties such as its bend method and bend radius.
• Again select the top plane i.e XY plane and create a new sketch on it. Sketch a horizontal line on its face and provide dimensions to it so that we can get it in the place we want.
• Now select the Unbend command and unbend all the faces or edges of the sheet metal just by selecting the stationary face and the edges to be unbended and unbend it.
• After unbending select the Bead command tool and then select the sketch line which we previously created and provide depth and radius for the bead command and also the die radius and say Ok to create a bead on the top face of the sketch.
• Again Rebend the sheet metal by selecting the rebend command and select the faces to be rebend again and say OK. After rebending again select the top face and create sketch points on its face for creating holes. After creating sketch points on the top face of the sheet metal select Hole command and provide certain parameters such as hole type and the points were we need holes. Make sure to provide definite diameter and depth limit as through body and say OK.