Advanced Sheet Metal Design Using NX Cad Challenge_2_Box Assembly

BOX ASEEMBLY USING NX

OBJECTIVE:-

To create a box assembly using a different sheet metal commands that will help to know about every single command in detail.

INTRODUCTION:-

In this project we learn about how to design box aseembly and what command are used to design this part and it is help to know about every single command in dtails that will help to design diffrente type of part in diffrente type of situtaion

DESIGN METHODOLOGY/APPROACH:-

DESCRIPTION:-

To make the sheet metal box aseembly these commands are used :-

• Tab:- This command is used to make a sheet metal part by adding material in sketch.

(Tab)

• Flange:- It is used to make flange at any direction in any angle. Flange basiclly creat a bend between to faces.

(Flange)

• Closed Corner:- This command is used to change the corner style like make close & relife cornore in V cutout,U cutout,open cutout,close cutout and rectangular cutout.

(Close relife cutout)

• Hem:- This command is used to making hem in sheet metal part. Hem is used to fold the edge of sheet metal part to achive the tight fit with other part.Normally hemming is used to connect parts toughter.

(Open Hem)

• Mirror Boddy:- This command is helpfull to make simillar part as respect to plane .

(Mirror Boday)

• Unite:- This command is used to make a single part or join the to diffrente parts.

(Unite)

• Dimple:- This command is used to left the area of a model that inside a sketch.

(Dimple)

• Mirror Feature:- This command is simillar to mirror boady but in this command sketch and feature both are mirror with recpecte to plane and line .

(Mirror Feature)

• Bead:- This command is used to lift the material along the contour of a sketch that is simillar to the dimple command .

(Bead)

• Closed Hem:-This command is used to making hem in sheet metal part. Hem is used to fold the edge of sheet metal part to achive the tight fit with other part.Normally hemming is used to connect parts toughter.

(Closed Hem)

• Tab:- Now we make the door of the box with the help of tab command.

(Head of the Box)

• Make open & close the door mcanisame:- To make this mechanisum these commands are used:-

(open & close the door mcanisame)

1. Tab
2. Break corner
3. Flange
4. Open Hem
5. Normal cutout

MODEL REPORT:-

Top View

Front View

Side View

Isometric View

Detailed Drawing:-

CNCLUSION:- Knowelge of creatin a sheet metal Box Aseembly.