Yacht

Objective:

• To design various parts of Yacht using Solidworks under part modeling
• To assemble the parts of Yacht in assembly environment
• To render and create photorealistic view of Yatch using Photoview 360

Modeling Tools:

The following are the tools used for modeling parts of chopper

2D Tools: Line, Spline, Circle, rectangle, polyline, fillet , Chanfer, smart dimension, sketch pattern, Trim, offset entities.

3D Modeling Tools:

Extrude Boss: It converts the 2D sketch into 3D object.

Extrude Cut: It is used to make holes/ cut the 3D object.

Revolve: It to used for creating revolved profile with referance to the sketch and axis of rotation.

Lofted Boss: It is used to create 3D solid of different cross-section.

Pattern: Patterns are various types like linear pattern and circular pattern. It is used to create required number of identical parts in a certain pattern/ sequence.

Mirror: It is used to create the mirror part object.

Shell: It is used to convert the solid object to hallow.

3D Sketch: It is used to create a 2D sketch between two different planes

Fillet, Draft, Shell, Combine, Intersect, Sweep Boss, Split boss are also some of the 3D tools used for modeling.

Surface Tools:

Sweep surface: It is used to generate surface from sectional curve positioned along path

Filled Surface: It is used to fill the gap between the two surfaces by generating the surface path along the boundary of the two surfaces.

Surface Trim: It is used to cut the extra surface.

Surface Knit: It is used to join the two surfaces and reduces the gap between the two joined surfaces.

Parts of Yacht:

• Propeller
• Hull
• Superstructure
• Radar
• Radar Mast
• Front Seat
• Middle Seat
• Rear Seat
• Garage Door

Propeller: A propeller is a rotating fan-like structure which is used to propel the ship by using the power generated and transmitted by the main engine of the ship.

Commands Used:

• Sketch
• Revolve
• Lofted Boss
• Cut Extrude
• Fillet
• Circular Pattern

Hull: A hull is the watertight body of a ship or boat. The hull may open at the top or it may be fully or partially covered with a deck. Atop the deck may be a deckhouse and other superstructures such as a funnel, derrick, or mast. The line where the hull meets the water surface is called the waterline

Commands Used:

• Sketch
• Projected Curve
• Surface loft
• Surface Trim
• Surface Extrude
• Surface Fill
• Shell
• Extrude Boss
• Extrude Cut
• Chamfer
• Swept Boss
• Dome
• Helix and Spiral
• Linear Pattern
• Split
• Revolve
• 3D Sketch
• Mirror

Superstructure: A superstructure is an upward extension of an existing structure above a baseline. This term is applied to various kinds of physical structures such as buildings, bridges or ships having the degree of freedom zero.

Commands Used:

• Sketch
• Surface Extrude
• Ruled Surface
• Surface sweep
• Knit Surface
• Cut extrude
• Loft Surface
• Chamfer
• Fillet
• Mirror
• Combine
• Sweep
• Thicken Surface
• Dome

Radar: Marine radars are X band or S band radars on ships, used to detect other ships and land obstacles, to provide bearing and distance for collision avoidance and navigation at sea.

Commands Used:

• Sketch
• Boss Extrude
• Fillet
• Cut Extrude
• Sketch pattern
• Mirror
• Split line

Radar Mast: Radar reflectors mounted aloft from masts or above superstructures can help small craft to become more visible on radar. Vessels such as trailer boats often give very poor echoes on a ship's radar, especially in rough seas. These can be even poorer from fibreglass and timber vessels.

Commands Used:

• Sketch
• Extrude Boss
• Fillet
• Plane
• Revolve
• Swept Boss
• Mirror
• Dome
• Shell
• Linear Pattern

Front Seat: It is placed at the front of the superstructure.

Commands Used:

• Sketch
• Swept Surface
• Extrude Surface
• Surface loft
• Knit surface
• Surface Fill
• Surface Loft
• Chamfer
• Revolve
• Extrude Cut
• Fillet
• Mirror
• Dome

Middle Seat:

• Sketch
• Extrude Boss
• Chamfer
• Fillet
• Mirror
• Extrude Cut

Rear Seat: It is located at the end of the yacht deck.

Command Used:

• Sketch
• Swept Surface
• Offset Surface
• Ruled Surface
• Surface Extend
• Extrude Surface
• Extrude Boss
• Chamfer
• Fillet
• Swept Boss
• Mirror
• Revolve

Garage Door:

Commands Used:

• Sketch
• Cut Extrude
• Fillet
• Mirror

Assembly and Rendering of Yacht: https://drive.google.com/open?id=1lb2Ub8g3_KRD-binIubNZ7SMIKDIv8zA