3D Creation of Celing, Roof, Architectural plan, Structural plan, Sectional view, Elevation view and Camera specific view for a house plan using REVIT

Aim : 1

Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level. using Revit software.

step 1

• open the revit software
• the click new fire
• select the architecture
• draw theBased on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level

result:

Aim : 2

Model a roof above the ceiling by selecting the footprints of the ceiling. Using the adjustment toolbars appearing on-screen adjust the roof slope to 10 degrees. using Revit software.

step 1

• open the revit software
• the click new fire
• select the architecture
• Model a roof above the ceiling by selecting the footprints of the ceiling. Using the adjustment toolbars appearing on-screen adjust the roof slope to 10 degrees

Result :

Aim : 3

Using the file saved from weeks 2 to 4, create plan views for ground floor level and first-floor level including all the walls, floors, and components. Separate them to
architecture and structural plans. using Revit software.

step 1

• open the revit software
• the click new fire
• select the architecture
• Using the file saved from weeks 2 to 4, create plan views for ground floor level and first-floor level including all the walls, floors, and components. Separate them to
  architecture and structural plans

Result :

Aim : 4

Using the file saved from weeks 2 to 4, create plan views for ground floor level and first-floor level including all the walls, floors, and components. Separate them to
architecture and structural plans.

Using annotate toolbar add dimensions to all the walls and floors with reference to the longitudinal and transverse grids created in the project file

a. The architecture plan dimensions include details on where the components are placed within the buildings with relation to grids. Overall dimensions are sufficient for architecture plans

b. The Structure plan dimensions must include details on the position of all the walls and interior walls with reference to grids. Locate all the framing components of the building with reference to a fixed point using Structural plans

using Revit software.

step 1

• open the revit software
• the click new fire
• select the architecture

• Using annotate toolbar add dimensions to all the walls and floors with reference to the longitudinal and transverse grids created in the project file

  a. The architecture plan dimensions include details on where the components are placed within the buildings with relation to grids. Overall dimensions are sufficient for architecture plans

  b. The Structure plan dimensions must include details on the position of all the walls and interior walls with reference to grids. Locate all the framing components of the building with reference to a fixed point using Structural plans

Result :

Aim : 5

Create a sheet template from the view tab and adjust the parameters on the sheet to add appropriate views

using Revit software.

step 1

• open the revit software
• the click new fire
• select the architecture

• Create a sheet template from the view tab and adjust the parameters on the sheet to add appropriate views

Result :

Aim : 6

Using the elevation tab create the elevation views, looking at your building from East, North, South, and West

using Revit software.

step 1

• open the revit software
• the click new fire
• select the architecture

• Create a sheet template from the view tab and adjust the parameters on the sheet to add appropriate views

Result :

Aim : 7

Produce section cut through each room either cutting across longitudinally or in a transverse direction

using Revit software.

step 1

• open the revit software
• the click new fire
• select the architecture

• Produce section cut through each room either cutting across longitudinally or in a transverse direction

Result :

Aim : 10

Create a camera-specific view or a 3D view in each room ( living, dining, bedroom). Based on the views create a new set of sheets starting A-501 (you can add as many sheets after, 502, 503.. n)to place the 3D view images. Produce the sheets as a part of project drafting

using Revit software.

step 1

• open the revit software
• the click new fire
• select the architecture

• Create a camera-specific view or a 3D view in each room ( living, dining, bedroom). Based on the views create a new set of sheets starting A-501 (you can add as many sheets after, 502, 503.. n)to place the 3D view images. Produce the sheets as a part of project drafting

Result :