The compression test requires a higher capacity machine because the               cross-sectional area of the specimen increases during the test, which is theopposite of a tension test. The increase in arearequiret a load higher than     that for the tension test to…

           STRUCTURAL ANALYSIS OF SPHERE PRESSING ON A FLAT PLATE Objective :            To perform the structural analysis to a sphere pressing on a plate and experience the plastic deformation on the plate.                …

The temperature rise is due to the work input,the temperature will be highest in the necked region because that is where the strain, hence the energy dissipated per unit volume in plastic deformation, is highest

             Wire Bending Analysis Objective:      Simulate bending of wire with three different material such as Copper Alloy, Aluminium Alloy and Magnesium Alloy (Non-Linear) and find the Equivalent Stress and Equivalent Strain on the wire alone. Workbench Setup The CAD…

Objective :        To perform the explicit dynamics simulation on machining with planer with two different velocitie and to find out the equivalent stress,total deformation and temperature of the model. EXPLICIT DYNAMICS :      The ANSYS explicit dynamics suite enables you to capture…

        STATIC STRUCTURAL ANALYSIS ON RAILWHEEL AND TRACK IN ANSYS Objective :        The objective of the project is to perform a static structural analysis on Railwheel and track and compare Total Deformation, Equivalent Stress, and life under different loading condition. Also,…

Objective :     To perform the transient structural analysis on a double universal joint with a spring using three different materials and to find out the equivalent stress and total deformaion. TRANSIENT ANALYSIS :    Transient structural that is also termed as time history load is the type of analysis in…

Objective :           The objective of this project is to perform grid dependency test for bevel gear with dfferent mesh sizes i.e 6mm, 5mm, 4mm.Evaluate and compare their equivalent(von mises) stress, equivalent elastic strain, total deformation. GRID DEPENDENCY TEST :      …

       STRUCTURAL ANALYSIS OF ROLLING OPERATION ON COPPER WORKPIECE   Objective :             The objective of this project is to simulate structural analysis of the rolling on a copper workiece and to simulate results i.e., equivalent plastic strain,equivalent…

                STRUCTURAL ANALYSIS VERIFICATION OF WELD JOINTS Objective :         The objective of this project is to simulate structural analysis verification of weld joints with three different types of welding using three different weld materials. Case 1. …

Objective :             To design a plate with single hole and multiple holes and determine the stress concentration on the plate by conducting structural analysis using Ansys Workbench. STRUCTURAL ANALYSIS :  Structural analysis is the process of calculating and determinig the the…

Objective :        To perform the tension and torsion test on the specimen and find out the total deformation,equivalent stress and the temperature on the specimen. TENSION TEST :        A tensile test, also known as a tension test, is one of the most fundamental and common…

Objective :         The objective is to simulate static structural analysis on spur gear with three different materials (cast iron(ductile), cast steel and cast bronze) and compare their Total deformation, Equivalent stress(von Mises), Stress Intensity and find the location of the fracture. SPUR…

Objective :         To perform a parametric study to analyse a frontal impact car crash test using three different values of thickness for the car body.                                         …

Objective : To simulate the bullet penetration into the bucket using three different non linerar materials for the bucket and analysing their behaviour for the same velocity of the bullet.                                    …