Backdoor- This model consists of an inner panel, outer panel and reinforcements. The designing of the backdoor done with the help of the given standards and guidelines provided in the course videos. INNER PANEL   Reinforcements   Outer panel   Assembly  

BOX ASSEMBLY Features used in the modelling are: Closed corner Hem Unite, etc...

  Benchmarking involves a structured comparison between similar products, services or processes on some dimensions of performance.   Requirement of the user as per the case study: Seating capacity- 5 seater Budget- 8 to 10 lakhs Driving conditions- city & highway Interested Segment: SUV Mr. D.S. Pughazhyendhii…

  HOOD PANEL DESIGN: The hood is the hinged cover over the engine of motor vehicles that allows access to the engine compartment for maintenance and repair. Hoods are typically made out of steel, but aluminium is rapidly gaining popularity with auto companies. The several parts of the Hood panel are…

ABOUT THIS PROJECT: This project is a 3D design model of American Chopper bike. It has several complex design and all the dimensions are taken from the original product. It is a cosmetic model. I have used SOLIDWORKS software. Some of the important parts in the assembly:     IMPORTANT FEATURES USED IN THE MODELLING:…

About this Project: It is a 3D design model of luxury yacht which consists of several solid bodies and complex surfaces. This design is created using the SOLIDWORKS software. All the dimensions given is taken from the original product. It is a cosmetic design. About Sunseeker: Sunseeker International is a Chinese-owned…

Section modulus: is a geometric property of the cross section used for designing beams and flexural members. It does not represent anything physically. To define section modulus, it may be defined as the ratio of total moment resisted by the section to the stress in the extreme fibre which is equal…

  Features used in this casing model are: Tab flange bending unbending flat pattern breaking corners holes dimple studio spline beads mirror

I have completed the fender design part considering all the mountings and necessary embossing. As the master section given for the Drip area, & for the sill mount, bumper mount ans A-pillar section i have created my own design. I am submitting file in the .prt format.

Underbody rust-preventive coating The underbody coating that is most commonly used on cars is a thick, rubberized paint that forms a 2-3 mm thick coating all along the underside of the car when sprayed on. You also get a thinner clear coat underbody coating which is like a lacquer that coats the entire underside of the…

An automobile roof or car top is the portion of an automobile that sits above the passenger compartment, protecting the vehicle occupants from sun, wind, rain, and other external elements. Because the earliest automobiles were designed in an era of horse drawn carriages, early automobile roofs used similar…

Calculation of wheel arc radius using Europian standards There are some predefined standards for the successfull passing of wheel arc condition for the fender: These requirements are proposed by the europian vehicle and road safety community to the minimum requirement of the wheel arc distance from the wheel for the passenger…

"I have already completed my coursework, I'm doing this re-submission as per the guidelines given by " Mr Soundar Rajan M" .   https://drive.google.com/file/d/1ENgQHe_fzc2-8NfaAYkM-VQDfazOWRXs/view?usp=sharing