External aerodynamics meshing with cfMesh and OpenFOAM: free, 61 minutes
This is a January 2023 recording of a live Skill-Lync workshop, 61 minutes long, with questions from attendees. After a short refresher on fluids, drag and lift, it demonstrates cfMesh on two cases: a cylinder and a complex STL model, ending with results in ParaView. It is a demonstration of the meshing workflow, not a full OpenFOAM solver tutorial.
25 chapters · published 31 Jan 2023 · 2,671 views as of 21 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Mechanical and aerospace students and early-career CFD users who know basic CFD and want to see how cfMesh meshes an external flow case in OpenFOAM.
What will you learn?
- Describe Reynolds number, Mach number, drag, lift and the boundary layer as the speaker defines them
- Explain where cfMesh fits in an OpenFOAM case and that meshDict sits in the system folder
- Check an STL geometry with surfaceCheck and build an enclosure with surfaceGenerateBoundingBox
- Read a short meshDict (maximum cell size, refinement box, local refinement) and run cartesianMesh
- Scale an STL from millimetres to metres and rotate it with surfaceTransformPoints
- Size a refinement box using a box source in ParaView and view streamlines of the result
What does each part of the course cover?
8 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.
- 0:007 min · 3 chapters
Fluids, dimensionless numbers and what aerodynamics is
Starts with the definition of a fluid and the static, kinematic and dynamic states, then explains dimensionless numbers as ratios of inertia to other forces. Defines the Reynolds number (inertia over viscous forces) and the Mach number (speed over speed of sound) and says the workshop stays with laminar flow.
- 6:446 min · 2 chapters
Drag, lift and the boundary layer
Introduces external versus internal aerodynamics. Defines drag as the force component along the free stream and lift as the component perpendicular to it, each made up of pressure and shear parts. Names pressure drag and skin friction drag, then describes the boundary layer as the region where viscous forces dominate.
- 12:263 min · 3 chapters
CFD workflow, cfMesh and the OpenFOAM case structure
Sets out the CFD workflow (problem definition, meshing, solving, post-processing) and the OpenFOAM meshing options blockMesh and snappyHexMesh. Presents cfMesh as an open source meshing utility, and shows that a case still has 0, constant and system folders, with meshDict replacing blockMeshDict or snappyHexMeshDict.
- 15:398 min · 3 chapters
Cylinder case: STL geometry and the bounding box
Describes the first case, a cylinder of two units in diameter and height. Explains that cfMesh reads geometry as an STL file, checks it with surfaceCheck (bounding box of -1 to 1 in each direction) and builds the fluid enclosure with surfaceGenerateBoundingBox, writing it into constant/triSurface and viewing it in ParaView.
- 23:5312 min · 4 chapters
meshDict, cartesianMesh and mesh settings
Walks through the short meshDict: the surface file, a maximum cell size of 1, a refinement box with cell size 0.5 and optional local surface refinement. Runs cartesianMesh, notes that tetMesh and pMesh use the same file, checks the mesh with a slice in ParaView, and shows changing the cell size.
- 35:537 min · 3 chapters
Second case: scaling and aligning a complex STL model
Moves to a character model from a designer. Converts its units from millimetres to metres with surfaceTransformPoints using a scale of 0.001, looks at the other options of that utility such as rotate and translate, and rotates the model so the flow runs along the x axis. Notes the same idea can set an airfoil angle of attack.
- 42:4311 min · 3 chapters
Enclosure, refinement box and memory needs
Creates the enclosure for the aligned model, then shows how to size the refinement box by placing a box source in ParaView and adjusting its centre and lengths by trial. Mentions refining only part of a body, and the speaker's warning that finer meshes need machines with more RAM.
- 53:188 min · 4 chapters
Running the case and viewing results in ParaView
Says the solve needs the p and U files copied from an existing tutorial, then shows the finished result in ParaView. Answers questions on importing CAD as STL and what to analyse (pressure, velocity, lift and drag), then builds a streamline tracer from a point cloud, adds a tube filter and closes with the meshDict recap.
Is the External Aerodynamics Analysis using cfMesh and OpenFOAM course really free?
Yes. All 1 h 1 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 31 Jan 2023 and had 2,671 views as of 21 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the External Aerodynamics Analysis using cfMesh and OpenFOAM course take to finish?
The video runs 1 h 1 min across 25 chapters. At one hour a day that is about 2 days; plan roughly twice that if you practise each exercise as you go. The longest section is "meshDict, cartesianMesh and mesh settings" (12 min), so give it its own days.
Does the free cfMesh course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is Introduction to OpenFOAM Development (free lessons), then Advanced CFD using OpenFOAM (₹40,000), then Post Graduate Program in External Aerodynamic Simulations (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
Can cfMesh make tetrahedral or polyhedral meshes as well as Cartesian ones?
According to the speaker, yes. The same meshDict file is used and only the command changes: cartesianMesh for a Cartesian mesh, tetMesh for a tetrahedral mesh and pMesh for a polyhedral mesh. The workshop itself runs cartesianMesh on both example cases and does not run the other two.
What geometry format does cfMesh need, and can I design the model in CAD?
The speaker says cfMesh takes the geometry as an STL file, which stores triangles with nodes and surface normals. In answer to a question, the speaker says a model designed in a CAD package such as SolidWorks can be imported by exporting it as STL. The workshop shows checking it with surfaceCheck.
How much computer memory do I need to run cfMesh?
The speaker says the demo mesh, with the cell sizes shown, could run in a few minutes on a 16 GB machine, but that 16 GB is not enough for a finer mesh, where the process can get killed, so a system with more RAM is recommended. These are the speaker's remarks, not tested figures.
Last updated 21 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 21 Nov 2026 · Grow by Skill-Lync: free lessons from every course