Full course · free on YouTube · 1 h 33 min

OpenFOAM workshop: free, 1.5 hours

This is a 2019 recording of a live Skill-Lync workshop, 1 hour 33 minutes long, with questions from attendees along the way. The first 40 minutes cover what OpenFOAM is and the CFD fundamentals behind it; the rest sets up and runs the icoFoam lid-driven cavity case in a Linux virtual machine.

14 chapters · published 2 Feb 2019 · 51,969 views as of 19 Nov 2026 · by Skill-Lync

Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗

Who is this course for?

Engineering students and early-career engineers who know basic CFD and want a first look at how an OpenFOAM case is set up and run.

What will you learn?

  • Explain what OpenFOAM is, what open source means for a CFD solver, and which industries use it
  • Describe the four CFD steps and how discretisation turns partial differential equations into a linear system
  • Read an OpenFOAM case: the 0, constant and system folders and what each file in them does
  • Write a simple blockMeshDict with vertices, a hex block, cell counts, grading and boundary faces
  • Set start time, end time, time step and write interval in controlDict, then run blockMesh and icoFoam
  • View a lid-driven cavity result in ParaView as a mesh, a velocity field and vectors

What does each part of the course cover?

9 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.

  1. 0:007 min · 2 chapters

    Open source CFD and who uses it

    Explains that OpenFOAM is a free, open source CFD package, unlike closed commercial solvers whose meshing and solver methods cannot be inspected, and that its code can be changed and used commercially. Shows example problems (interface tracking, a ship propeller, a valve), answers a validation question and lists the industries and labs that use it.

    Chapters
    • 0:00What OpenFOAM is: open source versus closed source CFD
    • 2:02What OpenFOAM can simulate, accuracy questions and who uses it
  2. 7:2719 min · 2 chapters

    The four steps of CFD

    Walks through pre-processing (CAD preparation, cleanup, extracting the fluid volume), meshing and discretisation of partial differential equations into algebraic ones, solving the linear system with iterative methods such as Gauss-Seidel, and post-processing. Also covers explicit versus implicit schemes and linearisation with a Newton-Raphson example.

    Chapters
    • 7:27The four CFD steps: pre-processing and meshing
    • 14:23Solving: linear systems, linearisation and post-processing
  3. 26:0610 min · 1 chapter

    Governing equations and turbulence models

    Presents the continuity, momentum and energy equations and what each expresses. Then explains why k-epsilon and k-omega models exist: direct numerical simulation solves the Navier-Stokes equations without a model but needs an extremely fine mesh, so models approximate the Reynolds stresses with a turbulent viscosity. The backward-facing step is named as a classic validation case.

    Chapters
    • 26:06Governing equations, turbulence models and direct numerical simulation
  4. 35:583 min · 1 chapter

    Conservation form and the finite volume method

    Explains why the conservation form matters when discretising: the finite volume method starts from the integral form, so mass, momentum and energy stay conserved, while a finite difference implementation can accumulate mass error. States that OpenFOAM is purely a finite volume code.

    Chapters
    • 35:58Conservation form and the finite volume method
  5. 39:267 min · 1 chapter

    Installing OpenFOAM and the terminal

    Describes running Linux inside VirtualBox to install OpenFOAM, which the instructor says needs at least 4 GB of RAM, then a short terminal tour with pwd, ls and cd and the OpenFOAM shortcuts to its tutorials folder. Advises understanding CFD first, picking a problem, and starting from the incompressible tutorials.

    Chapters
    • 39:26Installing OpenFOAM with VirtualBox and a first look in the Linux terminal
  6. 46:067 min · 1 chapter

    The OpenFOAM case structure

    Opens the icoFoam cavity tutorial and shows that a folder with 0, constant and system directories is an OpenFOAM case. The 0 folder holds initial and boundary conditions for p and U, constant holds transportProperties, and system holds blockMeshDict, controlDict, fvSchemes and fvSolution, each explained briefly.

    Chapters
    • 46:06The OpenFOAM case structure: 0, constant and system folders
  7. 53:168 min · 2 chapters

    Running the cavity case and viewing it in ParaView

    Copies the tutorial into a run folder, generates the mesh with blockMesh and runs icoFoam, whose name comes from the application entry in controlDict. Mentions checkMesh, then opens the results in ParaView to show the mesh, velocity colouring and vectors for a lid-driven cavity with a top wall moving at 1 m/s.

    Chapters
    • 53:16Running the cavity case with blockMesh and icoFoam
    • 57:07Viewing the lid-driven cavity results in ParaView
  8. 1:01:4019 min · 2 chapters

    controlDict and blockMeshDict

    Explains controlDict: application, start time 0, end time 0.5 s, time step 0.005 s (100 steps) and a write interval of 20 steps, giving six saved time folders. Then builds the geometry in blockMeshDict: vertex order, one hex block of 20 by 20 by 1 cells, simple grading, outward-pointing boundary faces and the empty type for 2D.

    Chapters
    • 1:01:40controlDict: start time, end time, time step and write interval
    • 1:04:13blockMeshDict: vertices, blocks, grading and boundary faces
  9. 1:20:3112 min · 2 chapters

    Boundary conditions, schemes and solvers

    Shows the 0 folder: uniform zero velocity inside, fixedValue (1 0 0) on the moving wall, no-slip on the fixed walls and empty on front and back. Then reads fvSchemes (Euler in time, Gauss linear), fvSolution (PCG, PISO) and icoFoam.C to see why only p and U need conditions.

    Chapters
    • 1:20:31The 0 folder: initial and boundary conditions for U and p
    • 1:22:28fvSchemes, fvSolution and reading the icoFoam source

Is the Workshop on OpenFOAM course really free?

Yes. All 1 h 33 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 2 Feb 2019 and had 51,969 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.

How long does the Workshop on OpenFOAM course take to finish?

The video runs 1 h 33 min across 14 chapters. At one hour a day that is about 2 days; plan roughly twice that if you practise each exercise as you go. The longest section is "controlDict and blockMeshDict" (19 min), so give it its own days.

Does the free OpenFOAM course come with a certificate?

The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.

What should I learn after this course?

The next step is Introduction to OpenFOAM Development (free lessons), then Introduction to OpenFOAM Development (₹40,000), then Advanced CFD using OpenFOAM (₹40,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.

Is OpenFOAM free to use?

The instructor describes OpenFOAM as an open source CFD package: you can read and change the source code and use it for commercial purposes. The other tools in the demo are also free, namely VirtualBox, used to run Linux, and ParaView, used to view results. The workshop itself is a free video on YouTube.

What do I need to follow the OpenFOAM workshop?

The instructor says to understand CFD first, for example what an incompressible, steady-state pipe flow simulation means. For the demo he runs Linux in VirtualBox and says at least 4 GB of RAM should be enough. A little C++ helps if you want to read the solver source, which he shows briefly at the end.

Does the workshop cover the dam break and backward-facing step cases?

The video description mentions both, but the recording only runs the lid-driven cavity case with icoFoam from start to finish. The backward-facing step comes up briefly as a classic validation case for turbulence models, and dam break does not appear in the transcript.

Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course

Finished the course?

Ask about the certificate or your next course.

Leave your name and phone number. A Skill-Lync counsellor calls you back within one working day about the certificate for Workshop on OpenFOAM and the course that fits where you want to work.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Free full course · Skill-Lync

Start watching

Free, no payment. Leave your name and phone once and the whole Workshop on OpenFOAM course plays here, with every free lesson on Grow. A Skill-Lync counsellor may call you about the certificate or your next course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.