Full course · free on YouTube · 1 h

EV testing, AIS standards and the V cycle: free, 1 hour

A single 59-minute recorded Skill-Lync workshop from March 2023, led by one instructor with slides. It follows an electric vehicle from homologation through battery, motor, controller and charger tests, Indian and global standards and validation levels, and ends with the V cycle. There is no live Q&A in the recording.

22 chapters · published 21 Mar 2023 · 1,396 views as of 21 Nov 2026 · by Skill-Lync

Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗

Who is this course for?

Electrical, electronics and automotive students and early-career engineers who want an introduction to how EVs are tested, certified and developed under the V cycle.

What will you learn?

  • What homologation means and why a vehicle needs approval before it is sold
  • Which tests the speaker lists for EV batteries: ageing, performance, safety and pack-level mechanical tests
  • How the speaker describes testing of the motor, controller, onboard charger, DC-DC converter, BMS and traction inverter
  • Which global bodies (ISO, IEC, SAE) and which Indian bodies and AIS standards the speaker points to for electric power train vehicles
  • The validation ladder from cell and component level up to lab and on-road testing
  • What the V cycle is, and how verification and validation link OEMs and suppliers

What does each part of the course cover?

8 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.

  1. 0:0010 min · 4 chapters

    Homologation: why a vehicle needs certifying and testing

    After housekeeping and the agenda, the speaker defines homologation as certifying a vehicle as roadworthy before marketing and sales, using BS6 and lamp certification as examples. A blood-test analogy then explains why each EV component is tested, and why customer requirements must be met.

    Chapters
    • 0:00Housekeeping and session agenda
    • 2:19What homologation means
    • 6:23Why vehicles and components are tested
    • 8:24Customer requirements, safety and conformity
  2. 10:027 min · 3 chapters

    Battery testing: ageing, performance, safety, mechanical

    Starting from a hybrid electric vehicle layout, the speaker walks through four groups of battery tests: ageing (life cycle, capacity fade, calendar), performance under dynamic load, safety (short circuit, overcharge, nail penetration, fire) and pack-level mechanical tests such as waterproofing, vibration and shock.

    Chapters
    • 10:02Hybrid electric vehicle layout and components
    • 11:14Battery testing: ageing, performance and safety
    • 14:31Battery pack mechanical tests
  3. 17:0817 min · 6 chapters

    Motor, controller, power converter, BMS and traction inverter tests

    Component by component: motor impulse, rotation, insulation resistance, surge and dynamic tests, the controller and its feedback loop, DC-DC converter versus onboard charger test set-ups, battery management system checks such as cell balancing, and traction inverter tests for motoring and regenerative braking.

    Chapters
    • 17:08Electric motor testing
    • 22:01Dynamic motor testing and digital twin
    • 23:27Controller testing and feedback
    • 27:12Power converter: DC-DC converter and onboard charger
    • 28:48Battery management system testing
    • 31:38Traction inverter and regenerative braking
  4. 34:254 min · 2 chapters

    Vehicle-level checks and global standards bodies

    At whole-vehicle level the speaker covers charging station compatibility, communication, plugs and wiring harness. ISO, IEC and SAE are named as globally accepted standards bodies, and climate and road differences are given as the reason countries add their own requirements.

    Chapters
    • 34:25Whole-vehicle testing: charging, communication and wiring
    • 35:53Global standards bodies and why countries differ
  5. 38:2010 min · 3 chapters

    Indian standards: ARAI, AIS series and EV approvals

    ARAI is introduced as the body for automotive standards in India. The speaker then lists the AIS numbers to note for electric power train vehicles (038, 039, 040, 041, 049), what each covers, and the Central Motor Vehicle Rules approvals, with reflectors and number plates as examples.

    Chapters
    • 38:20ARAI and Indian automotive standards
    • 39:52AIS-038 to AIS-041 and AIS-049 for electric power train vehicles
    • 43:16Approvals for EVs in India and hybrid vehicles
  6. 48:125 min · 2 chapters

    Validation levels, from cell to on-road

    Validation is described as a ladder of virtual and real-time levels: element (cell, module, pack), component, subsystem, power train, lab-level whole-vehicle testing and on-road validation with drive cycles. The speaker notes the lab test report matters for showing there are no safety issues.

    Chapters
    • 48:12Validation levels from element to vehicle
    • 50:55Lab-level and on-road validation
  7. 53:143 min · 1 chapter

    Troubleshooting common EV faults

    Typical EV faults and likely causes: a vehicle that will not run or stops suddenly (undercharged or old battery, charger, fuse, loose wire, switch, motor), short runtime, slow running when overloaded, and noise from a broken gearbox or defective wheel.

    Chapters
    • 53:14Troubleshooting common EV faults
  8. 56:243 min · 1 chapter

    The V cycle and the OEM and supplier view

    The closing topic: the V cycle as the development process from customer requirements through system design, component design, implementation, unit testing and integration to system testing, with verification and validation. Suppliers and OEMs both need test data, with Tata and Nexon as the example.

    Chapters
    • 56:24The V cycle: requirements to system testing

Is the Automotive Standards and V Cycle Workshop course really free?

Yes. All 1 h of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 21 Mar 2023 and had 1,396 views as of 21 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.

How long does the Automotive Standards and V Cycle Workshop course take to finish?

The video runs 1 h across 22 chapters. That fits in one sitting of under an hour; plan roughly twice that if you practise each exercise as you go. The longest section is "Motor, controller, power converter, BMS and traction inverter tests" (17 min), so give it your full attention.

Does the free automotive standards course come with a certificate?

The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.

What should I learn after this course?

The next step is EV Fundamentals (free lessons), then Introduction to the Future of Vehicle Validation-ADAS (₹40,000), then Post Graduate Program in Electric Vehicle Design & Development (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.

Which standards does this automotive standards workshop cover?

The speaker names ISO, IEC and SAE as global bodies and ARAI as the Indian body, then lists AIS-038, 039, 040, 041 and 049 for electric power train vehicles: construction and functional safety, electrical energy consumption, range, net and maximum 30-minute power, and CMVR type approval of electric power train vehicles. It is an introduction, and the speaker says it does not cover every standard.

What battery tests are mentioned for electric vehicles?

Four groups are described: ageing tests (life cycle, capacity fade, calendar), performance tests with dynamic load, safety tests (short circuit, overcharging, nail penetration, fire resistance) and pack-level mechanical tests (waterproofing, vibration, shock). The talk links safety testing to thermal runaway and EV fire reports.

What is the V cycle in this workshop?

The speaker presents the V cycle as the development process for automotive products, running from customer requirements through system and component design and implementation to unit testing, integration and system testing. Verification and validation are the two sides, and OEMs may ask suppliers for test data. It is the last topic, about three minutes.

Last updated 21 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 21 Nov 2026 · Grow by Skill-Lync: free lessons from every course

Finished the course?

Ask about the certificate or your next course.

Leave your name and phone number. A Skill-Lync counsellor calls you back within one working day about the certificate for Automotive Standards and V Cycle Workshop and the course that fits where you want to work.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Free full course · Skill-Lync

Start watching

Free, no payment. Leave your name and phone once and the whole Automotive Standards and V Cycle Workshop course plays here, with every free lesson on Grow. A Skill-Lync counsellor may call you about the certificate or your next course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.