EV system engineering, hardware and software: free, 1.7 hours
One recorded webinar of about 1 hour 41 minutes from April 2024, presented over slides by Vatsal Shah of Skill-Lync. It covers the EV big picture, power train hardware, software for the BMS and VCU, system engineering and simulation tools, then audience questions.
25 chapters · published 2 Apr 2024 · 2,803 views as of 21 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Electrical, electronics, mechanical and embedded software engineers working in or moving into automotive who want one view of how an EV's hardware, software and system requirements connect.
What will you learn?
- Name the main EV power train blocks (battery pack, motor, inverter, DC-DC converter, charger, VCU) and the IC engine part each replaces.
- Explain why a charger's or motor's rated power is a maximum, not a constant, using the 6.6 kW and 24 kWh charging example.
- Follow a power train dimensioning chain from wheel power through transmission, motor and inverter losses to battery size.
- Describe the BMS inputs, algorithms and outputs, and how a low state of charge leads to motor power de-rating over CAN.
- Outline how vehicle-level requirements flow to a tier one supplier and into a V-model and model-based system engineering workflow.
- Match simulation tasks (system level, motor, power electronics, thermal, hardware-in-the-loop) to the tools the speaker lists.
What does each part of the course cover?
9 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.
- 0:0010 min · 3 chapters
Welcome, agenda and the four megatrends
After the host and speaker introductions and a chat poll of audience backgrounds, the speaker sets the agenda: the e-mobility big picture, power train subsystems, system engineering, software-hardware integration and how to get started. It then explains the CASE acronym: connected, autonomous, shared, electric.
- 10:0610 min · 3 chapters
History and why adoption is growing
Covers early EV efforts and the battery energy density limit, then the speaker's three reasons for growth: better batteries and a supplier ecosystem, lower operating cost with a payback period, and policy incentives. It ends on the life-cycle emissions debate, where the speaker does not call EVs clean and green.
- 19:3614 min · 3 chapters
EV versus IC engine, component by component
Maps fuel tank to battery, fuel pump to charger, engine to motor, multi-speed gearbox to a fixed-ratio gearbox, engine control unit to motor control unit and alternator to a DC-DC converter. Then covers instant torque, regenerative braking, high-voltage HVAC and why electrical-to-mechanical conversion wastes less energy.
- 33:179 min · 3 chapters
Inside the vehicle: components, specifications and energy flow
Walks the components of a rear-wheel-drive EV: battery pack, e-drive unit, inverter, charger, auxiliary battery, cooling and DC-DC converter. A chat question on charging a 24 kWh pack with a 6.6 kW charger shows why rated power is a maximum, followed by energy flow in driving and regenerative braking.
- 42:368 min · 2 chapters
Battery cost, weight and power train dimensioning
Explains why EV cost and weight are driven by the battery and why every component must be efficient. A worked example turns 24,000 Wh at 250 Wh/kg into 96 kg of cells, then sizes the battery from wheel power through transmission, motor and inverter losses, and compares storage options.
- 50:3515 min · 5 chapters
BMS, motors, inverter, chargers and the VCU
Hardware and software integration, component by component: BMS sensing, actuation and CAN, its software layers, and de-rating motor power at low charge. Then motor types and mounting, the traction inverter and DC-DC converter, onboard versus off-board chargers, and the VCU as master on the CAN.
- 1:05:209 min · 3 chapters
System engineering and model-based development
Starts from what a vehicle maker decides first (vehicle type, voltage class, charging, targets) and how these become requirements passed to a tier one supplier. Then non-technical factors, a reverse-gear safety test case, model-based system engineering and the V-model.
- 1:13:518 min · 2 chapters
Getting started and simulation tools
Lists the domain knowledge to build first: vehicle dynamics, motors, power electronics, batteries and controls. Shows how scenarios such as start-up sequence or range estimation become different simulations, then which tools suit which task, with an electro-thermal vehicle model showing range with and without AC.
- 1:21:2220 min · 1 chapter
Audience Q&A
After a recap, the speaker answers questions on battery recycling and second-life use, whether a motor control unit sits in the energy flow, why gearboxes remain, digital twin versus model-based engineering, where BLDC motor control software fits, and free power train sizing tools. A course plug sits in the middle.
Chapters
- 1:21:22Closing recap and audience Q&A
Is the E-mobility: System Engineering, Hardware & Software Integration course really free?
Yes. All 1 h 41 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 2 Apr 2024 and had 2,803 views as of 21 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the E-mobility: System Engineering, Hardware & Software Integration course take to finish?
The video runs 1 h 41 min across 25 chapters. At one hour a day that is about 2 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Audience Q&A" (20 min), so give it its own days.
Does the free e-mobility course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is EV Fundamentals (free lessons), then EV Powertrain - Component Sizing and Specification (₹40,000), then Post Graduate Program in Electric Vehicle Design & Development (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
Do I need any software to follow this e-mobility webinar?
No. The webinar is slides, a few videos and an on-screen vehicle simulation model, so there is nothing to install. The speaker lists tool families for system engineering, motor design, power electronics, thermal work and hardware testing, such as MATLAB and Simulink or Simcenter Amesim for the system, Ansys Maxwell or JMAG for motors, Ansys Fluent or STAR-CCM+ for thermal work and dSPACE or OPAL-RT for hardware testing, as examples to look at later.
What is the difference between a digital twin and model-based system engineering?
In the Q&A, the speaker describes a model-based system model, like the electro-thermal model of a whole car shown earlier, as built from first principles. A digital twin is described as a replica fed with real-world data, such as experimental data from a battery supplier, and is therefore more data-driven.
Why do electric vehicles still need a gearbox if the motor controller can change speed?
The speaker answers that some EVs with hub motors have no transmission. Many designs instead use a high-speed, low-torque motor and a fixed-ratio transmission to reduce speed and raise wheel torque. So even though the motor controller can vary speed, a fixed-ratio gearbox is usually present.
Last updated 21 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 21 Nov 2026 · Grow by Skill-Lync: free lessons from every course