Lesson finished
Up next: Stable and Unstable Equilibrium and Global Instability Modes
Unlock all 66 lessons of Structural Stability of Lateral ForcesFull course ₹40,000 · paid
Why Structures Fail: Importance and Definition of Stability
A free lesson from Skill-Lync's Structural Stability of Lateral Forces course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Introduction to Structural Stability for Lateral Forces”
What will you learn in this free Structural Stability of Lateral Forces lesson?
The instructor explains why stability matters, using collapse causes in the construction and design phases and the strong column, weak beam idea. The lesson covers critical load, how horizontal deflection adds a P times delta moment to a cantilever column, and the difference between strength and stability.
- Why stability matters to structural engineers
- Strong columns, weak beams and plastic hinges
- Critical load and the P-delta moment
- Strength versus stability of a structure
What comes after lesson 1?
The next free lesson is lesson 2, “Stable and Unstable Equilibrium and Global Instability Modes” (17 min). Later in Skill-Lync's Structural Stability of Lateral Forces course (paid): lesson 4, Introduction to Frame Behavior Under Lateral Loads; lesson 5, Structural Stability for Lateral Forces; lesson 6, Construction Phase Loadings and Structural Considerations. The full course has 66 lessons (17 h 43 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Hello and welcome to this course on structural stability for lateral forces. This is going to be an introduction lecture about this topic. We are going to cover the following in this introduction lecture. So the importance of stability, the reason why structures fail, how do we define stability, what do we mean by stable structures, the various forms of instabilities that occur in structures, how does a structural response when subjected to lateral forces, what do we mean by horizontal deflections, eccentricities, and drifts. You are going to learn the following from this introduction lecture. So why stability is important, why structural engineers need to consider it, what do we mean by stable structures, and the various types of instabilities that occur in structures.
We are going to begin by talking about the importance of stability. Structural catastrophic failures occur in structures mainly due to main reasons. The first one is related to the construction phase, so inadequate structural stability during the construction phase. The second one is related to the construction phase, the second one is related to the design phase, whereby the structural engineer didn't design well the stability system of a specific structure. Therefore, it is the responsibility of structural engineers to ensure that a structure, one, is vertically stable throughout its construction phase as well as its intended design life cycle.
Three, that it contains at least one viable construction sequence. Equilibrium no longer exists in a structure when instability occurs and the structure form a mechanism. A mechanism is of no use to a structure as once it is formed the structure loses its ability to sustain further loading. Therefore, structural engineers need to make sure that a mechanism does not form in their structure unless needed. Failure to meet structural stability requirements lead to unsafe structures. This is why stability is a very important topic to consider. Stability is a function of the safety as well as the functionality of the system.
Misunderstanding or negligence of stability of structures lead to their collapses as numerous structural collapses had been observed throughout history. The two figures on the right-hand side illustrate two structures of similar geometry. The first one, so the figure on the left, illustrate a mechanism, so these are illustrated by the red dots that have been formed in the columns. The second one illustrates again a mechanism demonstrated by the red dots that have been formed in the beams. It is always preferable for the plastic hinges or the mechanism to form in the beams rather than the columns.
And this is what we refer to as strong columns, weak beams. The reason for this is that when the plastic hinges form in the columns, then sudden and unexpected failure will occur in the structure and therefore reduces the possibility of people surviving the catastrophic failure. However, when plastic hinges form in the beam, that means that local failure of the slab or the beam might occur and thus avoiding the overall catastrophic failure of the structure. This slide demonstrates a catastrophic failure of a steel bridge during its operation phase.
This is due to inadequate structural design of the stability system for this specific bridge. This is why stability is of crucial importance and why we should consider it carefully in order to avoid such catastrophic failures. Next, we are going to talk about the reason why do structures fail. Structural failures are attributed to two main categories. The first one being materials. The second one is about the instability of structures. The structural material strength or its yield limit controls its failure. So, what is the specific yield limit of a specific material is what determines at what point the material will fail.
This type of failure can be prevented by assessing the undeformed initial geometry of the structure using equilibrium conditions or equations of motions. Structural instabilities are the functions of size and geometry of the structure. So, the more complex the geometry of the structure is, the more complex its stability assessment is going to be. Structural engineers are mainly concerned with the load at which a point in a structure become unstable, i.e. critical load. So, we start by increasing the load on a structure. There is a specific point at which the load applied will cause the structure to become unstable.
This is what we refer to as critical load and this is what we try to investigate and find out in order to ensure that throughout the structure's life, this point will never be reached. This is in turn dependent on the stiffness of the material such as its elastic modulus. Non-linearity gets introduced due to geometrical deformations of a material that magnify the calculated stresses based on the initial undeformed structural geometry. So, non-linearity, basically, if we carefully study the figure on the right-hand side, we start by applying an axial load P and a horizontal force F for the undeformed geometry of the structure.
As the horizontal force gets applied, there is a horizontal deflection of magnitude delta. When the horizontal deflection occurs, your axial force P is no longer applied concentrically to the column. It is applied at an eccentricity delta. This means that the cantilever moment at the bottom of the column will compose of two components. The first one is basically your horizontal force F times the length of the cantilever column. The second one is due to the deformed shape because of the eccentricity that occurred, which is equal to P, which is the axial force, which is no longer acting concentric to the column, times the eccentricity delta.
And therefore, you add F times L plus P times delta. This will be your overall moment that acts at the bottom of the cantilever column. Therefore, previously used equilibrium conditions or motion equations need to be modified to account for the deformed shape of the structure. Next, we are going to talk about stability definitions. So what do we mean by stability? Stability and strength. Two terminologies that sometimes get mixed up when used, even though they are completely separate from each other. So structural engineers need to understand carefully what do we mean by the term strength and what do we mean by the term stability.
Strength is the ability of a structure to withstand the loads imposed on it. So your structure should be able to resist the loads without falling. It is a function of the individual elements capacities of the structure. So structural engineers assess the design capacity of each individual element, and structural engineers need to make sure that the load that this specific element is subjected to is lower than its design capacity. This is related to the strength check. Stability, on the other hand, is the ability of a structural system to transfer safely to the ground from the numerous loads that act on it.
Individual elements might be able to return their strength even as the system fails. So this means that your structure might collapse catastrophically, even though the design capacity of the individual element has not been reached, because stability is a function of your overall structure rather than individual elements.