← Course overviewFree lesson 1 of 3 · lesson 1 of 69Next lesson →

Unlock all 69 lessons of Reinforced Cement Concrete DesignFull course ₹40,000 · paid

Price & syllabus
Free lesson · 37 min · no payment

Structural Design Objectives, Systems and Indian Design Codes

A free lesson from Skill-Lync's Reinforced Cement Concrete Design course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 1”

What will you learn in this free Reinforced Cement Concrete Design lesson?

The instructor defines safe design through stability, strength and serviceability, then traces forces through a water tank and a building frame. The lesson closes with the design codes used for reinforced concrete, including IS 456, IS 875, IS 1893, IS 13920, ACI 318, Eurocode 2, SP 16 and SP 34.

  • Three objectives of structural design
  • How slabs, beams and columns carry load
  • Primary versus secondary beams
  • Which codes govern reinforced concrete design

What comes after lesson 1?

The next free lesson is lesson 2, “Concrete Ingredients, Compressive Strength Tests and Stress-Strain Curve” (35 min). Later in Skill-Lync's Reinforced Cement Concrete Design course (paid): lesson 4, Week 1 Session 4; lesson 5, Week 2 Session 1; lesson 6, Week 2 Session 2. The full course has 69 lessons (31 h 42 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hello, welcome to the course on Reinforced Cement Concrete Design. This is the first week of lecture and we will be starting with the introduction. Then we will look into the properties of concrete and steel in this week. So let's get started. Right. So this week we will look into briefly what are what do we mean by structural design? What are the objectives of a structural design? Then what are different types of structural system that you see around yourself? And then as a structural engineer, what are you supposed to see in a structural system?

Then we will look into what are the design codes or different design guidelines that are used for design of reinforced concrete structures? These three topics will basically cover the is basically the general gives you the general idea of design. Next, next we will dive into the hardcore stuff. What is concrete? What is the compressive strength of concrete? What are the other properties of concrete? Then how do you characterize the stress strain curve for concrete and how will you use it for practically for your design purposes?

And then what concrete being a heterogeneous material? How do you characterize the characteristic strength of concrete that you have a batch of mix of concrete laying around some some cement sand coarse aggregate mixed together and then so how do you quantify that? What will be the strength of that mix? So there's that and then steel since we are talking about reinforced concrete, so it's reinforced with steel. So we will also look into the properties of steel, so we will also look into the properties of steel, the stress strain curve, the modulus of elasticity and how do we plan to use it in structural design.

And then again, what's the importance of reinforcement in concrete? So we will look into this, all of these aspects briefly in week one. And then as we'll progress with the course, we will look into the design aspects of these things. In this week, the learning objectives will be like you will be seeing the overview of how what a safe structural design means. What do you mean that when you say that this structure is safe, this particular structure is safe or and it is designed as per code.

So what do you mean by that? What are the underlying principles for that? Briefly, we will look into that. Second, we will be familiarizing ourselves with design codes that are used for design of reinforced concrete structures here in India. Then you will be understanding how, what do you mean when you say this concrete mix has this compressive strength. So what do you mean by that? How do you identify the compressive strength of a concrete? What are the tests that is performed on concrete to measure its strength?

Then what are the different factors that affect the strength of concrete? There is creep, there is shrinkage. So we will understand, try to understand that what's the importance of creep and shrinkage in structural design. And then lastly, we will try to understand the behavior of reinforcing steel. So again, the stress strain curve, why steel is provided in reinforced concrete, why not anything else? So we'll look into that. Okay, so first, let's get started with what are the objectives of structural design. So when we say that and as an engineer, you are supposed to design a structure.

So it should be safe. Right now, safe is a very subjective word. As an engineer, we are supposed to quantify what do you mean by safety? Okay, so let's try to quantify what do you mean by safety? So the first and foremost objective of a structural design of any structural design, any structure that you see in and around yourself is that the structure should be stable. What do you mean by that? So basically, say you have any structure for simplicity, I have just drawn a portal frame over here.

A very simple structure again, portal frame. And if you apply a lateral load at its tip. So due to this lateral load, there will be a deflection in this structure. Okay, when you apply this load, this will be the deflection in this structure. This portal frame will deflect like this. Of course, this is exaggerated. But yes, something like that. When you remove the load, this will come back to the original position or if not original position, say there are if you want to say that, okay, there are some plastic deformations or other fancy stuff.

I mean, if you want to go into advanced things, so there are if there are any plastic deformations, it will not come back to its original position, but it will come back to may might come back to up to this or this position. The rest is what you will call as plastic deformation. So the point I am trying to make over here is that if you apply a small lateral force, the structure should deflect, but should not collapse. So in other words, you can say that the structure should be in stable equilibrium.

There are two types of equilibrium, stable and unstable. So unstable equilibrium means the support conditions or something. There might be n number of things. Let's say, for example, you have in place of fixed support over here, you have pinned supports. OK, so these these things can rotate. OK, so now you have this portal frame and these things can rotate at the bottom. So now you apply a lateral load. As soon as you apply a lateral load, this since this is not fixed at bottom. So this will move, move, move, move, move and eventually fall down under the effect of this small load.

OK, so that's unstable equilibrium. So that's one philosophy that you are not supposed to provide pinned joint over here. So that's that's just one example. So there can be n number of things that can make a structure unstable. So that's the first objective of structural design that the structure should be in stable equilibrium, not it should not be unstable. So when you apply a force, it can deflect. When you remove the force, it should come back to its original or position or it can have certain plastic deformations, but it should not collapse.

Next objective of structural design is strength. So when you apply forces again, this is an sample portal frame with columns and beams and then the loads are applied. So basically these are the vertical or gravity loads and the ones in green that you see is lateral forces, which can be due to wind or earthquake. So when you apply these loads to this to the structure, to the structural elements, the stresses, of course, when you apply loads, the structural elements will be subjected to some stresses and that stresses, those stresses should not increase, should not exceed the allowable stresses that's allowed for these structural members.

So say, for example, say, for example, say, for example, say, for example, 50 mega pascals, but the allowable stress for this material is 40 mega pascals. So this beam will fail because you are exceeding the allowable stress limit. So that should not happen. So the second principle is that the structure, when you apply it to loads, of course, the loads will be anticipated by you as an engineer, you're supposed to anticipate that how much load will be acting on the structure. And then you apply some factors and all that stuff.

We will see those in detail. So when you apply these loads to the structure, it should not collapse. OK, so the dotted lines that you see over here, it's basically the beam collapsing like this. So under the effect of this load, it can collapse like this. So you're supposed to ensure that for the loads that you have estimated first, your load estimation should be correct. Second, second, for that estimated load, your structural members should have sufficient design strength so that it does not collapse under the applied loads.

So that's what that's why I said that a structure should not collapse under the effect of applied loads. Third objective, again, this third objective is mostly it does not affect the safety of the structure that much, but it is very again a very important thing. It does affect the durability of the structure and it does affect the usability of the structure. So third thing is serviceability. What do we mean by that? So any structure again will be subjected to different types of loads. And due to these loads, the structure should not deflect or basically say, for example, you have this beams over here.

Okay, this is a sample portal frame. There will be, if this is a part of a building, then there are N number of portal frames and these beams will be supporting some slabs. Okay. So now if under the effect of these loads, these beams deflect, these beams will deflect. But if this deflection is too large, then the person, the people who are working or the occupants of this building will not feel safe because thus that deflection might feel them, might be a cause of concern for them, might make them feel like, you know, uneasy, might make them feel uncomfortable while being inside this building.

So you don't want that. That's one aspect that you don't, you want the occupants of the building to feel safe psychologically. So you don't want excessive deflections. Second, when you apply loads, the, say this beam will not collapse totally and it will not collapse under the effect of these loads. Totally fine. You will say that, okay, my structure is safe. But another aspect is that this beam should not, under the effect of applied loads, there's a tendency for structural elements to crack, especially reinforced concrete elements.

There are tendencies for these two cracks. And once the beams and all start cracking, then it will be subjected to moisture and other elements that can corrode the reinforcement that's inside the reinforced concrete elements. Okay. And if that happens, then the beam will deteriorate over time and it's say within say five years or 10 years, then the reinforcement might get corroded so bad that the beam might fail. So you don't want that. So that's why you are supposed to, again, we are supposed to design the structure under serviceability, under the effect of serviceability, you are supposed to design the structure so that it does not crack as well.

The design codes usually has these philosophies inbuilt to ensure that, you know, the deflection is under limit and you don't have a lot of cracking in the structural elements. We'll, we'll, we'll, again, we will look into this. Don't you worry about it. But these are the three objectives of structural design. Equilibrium, so stability, that the structure should be stable under the effect of loads, strength, the structure should not collapse under the effect of applied loads, serviceability, the structure should not deflect too much or the structural elements doesn't crack too much.

That's just cracking and deflection are just two examples of serviceability. There can be different examples based on different applications. So these are the three objectives that we will, as we move forward with structural design, we will always ensure that we satisfy these objectives as a structural design. Okay. So let's go ahead. When I say structural system, what do you mean by that? Okay. So let's just look at an example over here. When I say structural system as in structural engineers, you are supposed to see through a structural system or the force flow.

So you are supposed to look into that, okay, what are the forces that a particular structure is subjected to, you are supposed to have a X-ray vision for forces. So let's decode water tank. So let's decode what does the water tank as a structural system will look like. So this is the water tank over here. This one, it has water filled in it. Due to this, this water will exert hydrostatic pressure on the walls of the tank. Okay. So, and the tank is made up of different elements. It's like the base slab and then the side wall.

And then there are some stiffeners. And then you have some fancy names like ring beam and also, but they are just beams. So basically the force, hydrostatic force due to water is experienced by these elements. And then at the base, you have this, you know, below the main ring beam, you have this columns attached over here. Okay. So at this point, all of these forces will come down as, of course, three elements, just like shear, vertical reaction and moment, shear, vertical reaction and moment. Okay. So now you have this. So, so basically what's going on in here inside the water tank.

So let's first inside the water tank, you have the hydrostatic pressure and of course, you will have the self weight of the tank. So all of this will result into three major forces. Okay. Like shear, vertical reaction, moment. That's all. Okay. So shear, vertical reaction, moment at each of these columns. First things. Second, so externally, if you look, so this, since it's a tall structure, it will be subjected to wind forces. So wind forces. So again, the wind forces acting on this shell, this, this tank portion.

Again, it can be resolved into lateral shear, vertical load and moment, lateral shear, vertical load and moment. Okay. So there's this and then this, the column carries this load. So column needs to be designed for this, these forces and then the column will also be subjected to wind loads directly. So that's why they are braced together because so that they don't, if you do not brace the columns, it can deflect a lot. So you brace the columns in between and then these are subjected to wind loads.

So then there will be additional forces in the column apart from these. So there's this. So then finally, the forces are transferred from the column. This section over here is here at the bottom. Okay. So from the column, you will have again the three elements, shear, vertical load, moment, shear, vertical load, moment, and that's transferred to the soil. And you see the soil will be subjected to soil pressures. I mean, there will be pressure arising on the soil because of the applied loads, which makes sense.

I mean, all of the loads going to the soil, it will give rise to some type of pressure or some type of reaction in soil, which you see as soil pressure. So this basically is the complete idea of a structural system that, okay, you know, as a structural engineer, you start looking into that, okay, how does the force flow works? So you have this tank element, which is subjected to hydrostatic pressure and the self-weight and all that stuff. And that gives rise to lateral shear, vertical load, and moment, lateral shear, vertical load, moment at the base.

Then this force is transferred to the columns over here. The columns will be at will again be subjected to wind loads. So they will have generate additional lateral shear, moment, and vertical load. And then at the bottom, that force system is arrested by the footing or foundation of the water tank. So that's how a typical structural system as such as water tank acts like. Let's see another example. So, for example, the most common structural system that you will see around yourself is buildings. And throughout this course, we will be primarily talking about vertical or gravity loads acting on the buildings.

We will not go into the seismic forces. In some cases, we will talk about, talk slightly about wind loads, but that's about it. We will not go in details with the wind loads. So we will primarily talk about the vertical loads or gravity loads that will be acting on the buildings. So, in a typical structural system, in a typical building, the vertical loads act on the slab. Then the slab are usually connected to the beams. So slab transfers all the loads to the beam. There can be different types of beams, say primary beams and secondary beams.

We will look into it in the next slide. Then from the beams, the loads are transferred into the columns. And then subsequently, the column transfers the loads to the foundation. And from foundation, it's transferred to the soil. Okay. The lateral forces, basically like the wind or seismic forces, is usually resisted by the framing system. So, by framing system, I mean the combination of beams and columns. They are not resisted by slabs. The lateral forces are not resisted by slabs. They are resisted by the framing system.

So, there you see, this is a typical slab in a building frame. So, it's connected. This is the beam. And these are the columns. And then at the end of the slab, you have, instead of multiple columns, you have just one big wall. So, that's also a common arrangement. So, in plan over here, you can see that. So, this is one big slab. And you have these columns. And they are connected by beams like this, like this, this. And this wall is basically a very wide column.

This acts as a column. Okay. So, as a very wide column, this, this wall. So, the beam transfers the load onto the columns, columns. And this wall, this beam transfers the load to the wall, wall, wall. All these beams transfers load to the column. And then from column and wall, it's subsequently transferred to the foundation and hence to the ground. And this is how, typically, you know, this is what I mean by primary beam. So, basically, if you have, so this beam divides the slab into multiple parts.

So, this part, for example. So, this, this, this part over here, you can see over here. So, it's supported by columns that are directly supported by, it's supported. This column is supported by. We have beams that are directly supported on columns. OK, so these that's why these beams are called primary beams because they these beams transfer the load directly onto the columns. So that's why they are called primary beams. Another type of different type of arrangement can be, you know, you just add more beams over here.

So what does this mean is like so you have these beams which are called secondary beams, these, this one, this one. These two beams are secondary beams. So what they will do is from the slab, the loads will be transferred onto this secondary beam. And then this secondary beam will transfer the load to primary beam. And then from primary beam, the load is transferred to the column. So that's how the force flow takes place. So basically from slab to beam to column to foundation. In this case, from slab to primary beam, from slab to secondary beam, secondary beam to primary beam, primary beam to column and column to foundation.

Nothing to worry about. Very simple. So this is how it looks like in 3D. You have this slab and then this beams and this is the column connected. So the slab will transfer the load to the beams. Then beams will transfer load to the columns and then to the foundation. And then there are, you know, sometimes you just don't provide beams at all. You just say that, OK, my slab will transfer directly loads to the columns. So that's another way, another arrangement. So and of course, the slab design will be somewhat different.

There are some different criteria. This slab and this slab have different design criteria. But still, what matters is the structural system. So you don't need to have beams to transfer loads. You can have slabs directly transfer the loads to the columns or capitals. This is this is also called a capital, actually. So that's just a fancy name for column. That's all. So this this figure over here that you see is like so, for example, is like how our typical beam. So so when the slab load is transferred to the beam, it will deflect.

Right. The beam will deflect. So this is how a typical beam deflection beam would deflect under the effect of vertical loads. OK, depending upon the support conditions, usually it's fixed. So you will have some moment over here. Then you will have negative moment over here, positive moment over here and all that stuff. So based on the curvature, you can say that, OK, this is my reflected shape. And that what would what might be the what might be the moment diagram for this structural system. So as I was saying, so we looked into how slabs transfer the loads to the beams and then to the columns and then to the foundation.

So this is, again, a typical framing system in a building. So you see, I mean, these these three things are two, three different frames. So this blue one is one frame. Red one is another frame. Green one is another frame. And then these frames are connected by beams. This yellow lines, these yellow lines are beams. And then on top of these beams, I've just shown one slab for clarity, but there will be slab everywhere. OK, so there's there's that slab. So now this this whole arrangement, this this blue whole blue thing is one frame.

OK, is one frame. Remember, sometime like we talked about that the frame will resist the earthquake load or the wind or seismic loads. Right. So here you see. So in this whole building facade, you have you will have multiple frames like this. See, like what I have shown over here. So it's like we'll have multiple frames like this. So you will have multiple frames like this. So just you can just consider if you just consider one single frame, this frame is subjected to lateral loads. And this frame will entirely resist the lateral loads that the frame is subjected to.

OK, so due to these, this frame will give rise to some lateral shear, vertical reaction and moment at the bottom. OK, that's how the structural typical structural system in a building looks like when the building is subjected to lateral loads. It will the frame will take up all the lateral loads that these these lateral loads can be because of wind or earthquake. Right. And again, as I have in this one, we have seen that, OK, this this wall element, right, this wall element, this wall, basically one huge column instead of, you know, you see three columns over here at the end.

You have one wide, very wide column, which is called a structural wall or technique in professional practice. It's also mentioned a shear wall, but it's not actually a shear wall. I mean, it's not it's not that it's subjected to shear. That's why it's called a shear wall. It's a misnomer. But yes, so structural wall. So this wall also is subjected to I mean, this wall also takes up the lateral forces, the basically the wind or earthquake. When if it acts on the building, the vertical forces are taken by the slab transfer to the beam and all that stuff.

As I've mentioned already before, but the lateral forces are taken up by the structural frames, this structural frame or this one. OK, so that I guess finishes the structural systems. We have seen the different types of structural systems in a building. So now let's move on to design codes or as I like to call it the design criteria, because as a structural engineer, it's important to design safe structures, but it is also important to have uniformity. So what do I mean by that is two different structural engineers should design the same building using similar principles.

It's not like one guy can consider that. OK, she has. I will assume the sheer strength of concrete is this much. Another guy will say that, OK, I will assume the that the sheer strength of concrete is this. Who is right? Who is wrong? So for that, you have codes, basically the guidelines that will say that, OK, if this is the grid of the concrete, this will be the sheer strength of concrete. So that's what basically a code ensures. So the whole purpose of code is not to dictate that how a structure should be designed.

So the purpose of a code is not to dictate that what kind of structural design as an engineer supposed to do. But it gives you a bare minimum design criteria. So basically, what do you mean by that bare minimum design criteria is like, OK, you have say you have provided a beam in a structure and based on the analysis, you will say that, OK, I need this much amount of reinforcement in this beam. But based on researchers, because as a practicing engineer, it's not like you will not you will know about every research in the world and you will have known about every you might have read every paper in the world about concrete.

Right. So the design codes takes up the knowledge of all those research, all that research and compiles it into a design guidelines. So as I was saying that you will suppose if you design a beam and you probably you decide that, OK, I will need two bars of 16 mm diameter. OK, but some study in some country somewhere concluded that, OK, if you design a beam, the you should have this much amount of minimum reinforcement. Otherwise, the beam might fail or these problems might occur. So what we'll mention that if you are designing a beam, you should have this much amount of minimum reinforcement, at least this much amount of minimum reinforcement in your beam so that the beam is safe.

So that's what the code does. So basically, it indirectly it is ensuring the structural safety by specifying certain bare minimum design requirements. Then for as I have already mentioned that consistency among different engineers. So if there are two structural engineers, they are supposed to, of course, they can have their independent thinking, but they are supposed to stick to some standard guidelines for design of any structure. So, for example, if you are designing a building, two different structural engineers should not estimate the loads very differently. I mean, it's very obvious that two different person, if there are there are no guidelines, engineer one, say Sam, engineer two, say John Doe.

So Sam and John Doe will as well, of course, will assume two different loadings for two different for the same building. So there has to be certain guidelines that, OK, you know, if this is the type of the building, this is the load that you are supposed to consider for design purposes. And this is the load factors or load factors that you are going to use for structural strength design. So as to have consistency among different engineers, you are supposed to stick to the code, which is again a guideline document.

OK, apart from codes, there are another handbooks out there that usually make the life of structural engineers simpler. These handbooks were developed for pre-computer era. Basically, now you have computers and now you have spreadsheets. So you can, you know, just simply plug in some formulae and get the results with the click of a mouse. But earlier that was not the case. So there were certain design handbooks that developed design charts. Basically, those design charts mentioned that, OK, what should be the steel reinforcement in a beam for a given bending moment or what should be the size of a beam for a given bending bare minimum depth of a beam for a given bending moment and all that stuff.

So that made life of engineers easy. So there are some handbooks. People still use them. But personally. I can't lay this on a time. I don't think you're going on in front of a seat. Twenty-four. Are you, Google, actually? But anyway, but you guys stay Zeus-like. Again, it's my personal view that those being in this era of computers, you will you will you have spreadsheets so you can always, you know, do calculations at the click of a mouse. So it is always encouraged that you do your own math, do your own calculations because that helps you better understand things and that helps you grow as a structural engineer.

So the basic design codes for reinforced cement concrete around the world, I have listed a few over here. So first and foremost is, of course, the IS-456 Indian Standard 456-2000, which is based on limit state design. It came out in 2000 and it lays the principle for reinforced concrete design across India. Then you have ACI, which is American Concrete Institute, ACI-318-2019. That is again based on the limit state philosophy, of course, and it is more detailed, if you will, and more in-depth. It has more detailed and in-depth philosophies for most of the things that we don't see in IS codes.

So for complex structural projects, sometimes engineers also refer to ACI apart from IS codes. Then there's Canadian Standards Associations, A23.3-2019 again. So ACI and CSA are kind of similar, very close. That is again a very respectable code in the design world, the CSA codes. And then again the Eurocode 2 that is used by European unions. And previously there was British standards that and IS code has been inspired from British standards a lot. But now British standards, as Britain joined the European Union, they started developing, using Eurocodes as well.

British standards kind of went away. So yeah, there's that. I mean, I don't frankly now that British, Britain has left the European Union. So I don't know how things will look like in the future. Maybe we'll get to see more British codes in the future, but for now Eurocodes are the thing in Europe as well. So for our course, the following codes that we'll be looking into. So apart from IS456, of course, we will of course not go through all of these. I'm just stating that, okay, you know, you can have these codes.

These are codes that are usually referred to for design when you are working on design of reinforced concrete structure. So IS875 parts 1 to 5, parts 1 through 5, this lists the design loading for structures. So basically if you have a building, typical building, so IS875 lists the loads that will be acting on a building system. So for example, if you have a building, so part 1, part 1 lists the dead loads that will be the dead loads of different members. Part 2 lists the live load or imposed load on structures.

Similarly, part 3 will deals with the wind loads and so on and so forth. So IS875 talks about different types of loads that can act on a building. The second is IS1893-2016. This code is specifically for seismic design of reinforced concrete structures. So it talks about the earthquake forces that will be acting on the buildings and then all other different parameters that you are supposed to consider while designing a building. IS13920-2016 specifically deals with how you are supposed to detail the reinforcement in reinforced concrete structure or in a reinforced concrete building which is subjected to seismic forces.

So there are special detailing criteria as well. So it's not like you can have so for a gravity for a building that is subjected to gravity loads and that is not subjected that is not designed for seismic force seismic loads. We'll have a different reinforcement arrangement than the building that is designed for seismic forces. So IS13920 lists the requirement for that. Then you have special publication 16-1980. As I was talking about, this is a handbook or a design aid for reinforced concrete design. So this special publication has the different type of charts, different formulae that gives the practicing engineer, design engineer a quick view of, you know, what's going on.

Basically, what's the percentage of steel that will be needed for a beam of this, if the concrete grade is this much and all that stuff. So this SP-16 has a lot of design charts for that purpose. So it has design charts for design of columns, for design of beams. You just have to refer to those design charts. If you just need to have a bending moment value and the depth of your beam and you will get the what's the percentage of steel that you are supposed to provide for that beam.

So this was developed in 1980s. But again, as I have mentioned before, all these calculations are easy due to spreadsheets, availability of spreadsheets. So I will recommend that, you know, for design purposes, at least it's better to use spreadsheets than design aids because you will learn and you will grow. It's for your own benefit. Then again, there's another code that's special publication 34-1987. This code talks about the reinforcement detailing and other practices that talks about how you are supposed to lay out reinforcement in reinforced concrete elements and how you are supposed to splice reinforcement and how you are supposed to develop reinforcement and what is the minimum reinforcement that you are supposed to provide for a structural element and what's the stirrups that you are supposed to provide and all that stuff.

So we will go through the detailing criteria as per IS456 and that will cover pretty much major aspects of SP34. So we will look into that. So I think I'll wind up this session for week one now. And for this week, next session, we will look into the rest of the content. So yeah, that's it for this session. Thank you.

Want the rest of Reinforced Cement Concrete Design?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Reinforced Cement Concrete Design course

The remaining 66 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Reinforced Cement Concrete Design course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.