Lesson finished
Unlock all 30 lessons of Geometric Design FundamentalsFull course ₹40,000 · paid
Classification of Roads in India by Function, Traffic and Terrain
A free lesson from Skill-Lync's Geometric Design Fundamentals course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 2 Part 2”
What will you learn in this free Geometric Design Fundamentals lesson?
The instructor classifies roads by material, location and function, traffic volume, rigidity and topography. It describes expressways, national, state, district and village roads including PMGSY, green expressways, and urban roads such as arterial, city and service roads, ending with T, Y and plus junctions.
- Road classification by material, function and terrain
- Who maintains national, state, district and village roads
- Lane widths and design speeds for village and urban roads
- T, Y and plus junction types
What comes after lesson 3?
Later in Skill-Lync's Geometric Design Fundamentals course (paid): lesson 4, Week 1 Session 3; lesson 5, Week 2 Session 1; lesson 6, Week 2 Session 2. The full course has 30 lessons (9 h 26 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Coming to the classification of road. So in India, roads are classified based on the following factors. So there are different classifications are given to the particular road based upon the factor by which we are classifying that road. Means to say the same road can be classified as a different classification based upon a different factor. So can be classified according to a materials depending upon the location and the function which that particular road is carrying. The traffic volume it carries. The economy, the traffic type which it carries. Then the rigidity. We'll see what rigidity means and how the roads are classified. Then the topography. Based upon the topography, the roads are classified. Coming to the very first. As we can see from our daily practice and if we look at around.
So the different materials are classified. So the different materials are used for a construction of any road. And bit of them are a common material consisting of earthen roads. Earthen roads. We can say these were earlier roads. And nowadays those are used for very low purpose or a small connectivity. Then a gravel road. Or we can say it is unsurface road. Then more room conquer or a double beam. These we can say plays a similar role. Then coming to the main important as a bituminous road and a concrete road. So bituminous road are constructed with a use of a different bituminous product. That is either a bitumen either emulsion.
Then concrete roads. Then concrete roads. So concrete roads. Nowadays the use of a concrete in a road is increased. And few of or most of the high importance road. That is a national highway or expressway. And generally the urban roads are designed or constructed as a concrete road. So location and function. This classification plays an important road in case of a geometric design. As many of the standards are designed or are standardized for this type of or this categories of the road. National highway is a road. National highway is a road which connects the major cities of a different state. Like if we consider capitals of two states for an example. If we consider a Mumbai and a different any major city if we consider as a Hyderabad.
So the national highway. So the national highway connects these two cities with a proper speed. So that the driver can travel with at most speed. So he can reach to the destination as early as possible. Then a state highway. State highways are a highways within a particular state. Generally these highways connect the important locations within the state. It might be a district location or it might be a city or a location of importance. It might be a religious place. It might be a industry importance place or it might be any location which is developed that can also be connected with a state highway. Also state highway and national highway connects to the ports and harbors of importance.
So the goods can be transported to the ports to and from movement can be done with a port. Coming to the next that is a district roads. District roads again classified as a major district road and other district road. So we can say a major district road is a road within the district. It connects to the major villages or major locations within the district road. And based upon its importance or the function it can either be a major district road and can either be a other district road.
So coming to the rural roads. Rural roads are the important in terms of last mile connectivity to the each and every village. Nowadays rural roads are also being constructed as all weather road. All weather road means the road which can be accessed or it is accessible throughout the year in all seasons. So national highways are taken care of by the NHAI. That means a central government. State highways by the state government. District highways are generally maintained and managed by the district authority. That is a might be a Jilla Parishad or a PWD and rural roads by the local authority.
So there is a one recent classification above the NHAI is a expressway. So expressway connects a major location as a controlled access control or a road or a transportation or a highway facility for the user. So national highway and expressway can be considered is playing a similar role but expressway plays an important role in case of a speed. So coming to the next as a traffic volume. Depends upon the traffic it carries can be considered as a light traffic road, medium traffic road and a high traffic road. Generally the roads in industrial area or an urban area or we can say it as a built up area are a high traffic road.
The roads on a rural side can be a light traffic road with maximum percentage of slow moving vehicles can be a bullock car and a medium traffic. We can say in a general the roads can be a medium traffic. In terms of economy light cost road, medium cost road and a high cost road depending upon the importance, the terrain through which it is passing, the traffic it is going to carry, the cost will differ. So definitely the important roads in terms of expressways or national highways will have a high cost and unsurface roads or rural roads will be of a low cost.
Then a traffic type. So certain roads are mean for a particular road user, pedestrian, cycle track and motorway. And a particular cross section of highway can have all the three tracks as a single cross section but roads in a general are classified as a pedestrian ways dedicatedly mean for the pedestrian. Then nowadays the use of or the construction of a cycle track is increased so dedicatedly cycle tracks are getting considered or constructed for a cycle user. Then the motorways are specifically for the vehicle driver to use it.
Then the rigidity, flexible roads and the rigid roads. These are two important classes or classification of roads. Flexible road as this becomes a part of a pavement design so we will not go into a much detail but just to get an idea as every highway design engineer should know whether we are going to design a flexible road or a rigid road as the standards will have to be used accordingly. So the flexible road will generally be a bituminous road or WBM road than road. The concept behind the flexible road is that the load transfer from top to bottom through a grain action.
That means the load will be transferred by every elements of that particular road and it will fail as a cracking or a rutting. In terms of a rigid road, the concrete roads are generally called as a rigid road. So the load transfer for this particular type of road will be in a slab action. That means a one particular bracket of or particular area of that particular road transfers the load to the bottom layer and the failure of this road can be a cracking or the complete failure of that particular area.
Then coming to the topography as the roads are going to be a part of a natural terrain so we need to consider a natural terrain while designing plain area road and hilly area road. So the natural topography may be a plain and if it has some cross slope more than a particular value we generally call it as a hilly area. So as a general observation we can understand whether it is a plain or hilly but in terms of technical manner if we want to segregate or if we want to have some point to mention whether it is a plain or hilly.
After the survey data we can understand by getting the slope of that topography or getting the contours whether it is a plain or hilly. As the standards for both the type of terrain plain and hilly are a different one. So now we will see or look for the types of road. As in the slide we can see a different and a beautiful pictures of a different locations and different types of road. So as we have discussed based upon the function we do have certain types of roads and the major one or the important one is the expressway.
Then coming to a highway that can be a national highway or can be a state highway. Coming to a village road then MDR that is a major district road. Then if two roads are meeting at a one location we need to provide a junction that can either be a T junction can either be a Y junction or a plus or a X junction. Then if we don't want to cross a road at a same level then we need to provide a interchange and if we want to reach to our location from a important highway.
Suppose if we are traveling through expressway or a national highway and it is going or it is bypassing a particular city or any village then if we want to enter into that particular village there is a one road is provided alongside the highway. Generally called as a service road. Then coming to the next, the major classification is as per the location, connectivity and the purpose. They are generally classified into rural highways and urban highways. So whatever classification we have seen as a expressway, national highway, state highway, major district road and village road is a part of a rural highway.
Then urban roads are designed in a separate manner or the standards to be followed for the urban roads are different. Like in case of rural highways, the speed is of importance and in case of urban highways, the speed of the design will be a less but the turning radius for the vehicles will be of more importance in case of urban roads. Also the side distance requirement for rural highways need to be considered as the speed is high for them. And for the urban highways, the side distance will have the importance but will not be of a prime importance.
Coming to the rural highways, the first is the expressway. They are generally a access control. The major distinguishing factor from the expressway and a national highway is a access control. As they are designed for a very high speed. What access control means? It means if any user want to travel from a destination A to B without any disturbance, then he can travel smoothly. And access control means the access to the expressway either you want to enter or you want to exit, there will be a smooth entry and exit ramps will be provided or a separate roads will be provided for entry and exit. There will not be any crossing movement on an expressway. That means in terms of Indian condition if we consider the right turn movement is not allowed or not provided on an expressway.
Also it is provided with a proper fencing throughout the road so that no any extra vehicle or animal will be there on that particular road so as not to have any disturbance. As these are mean for high design speed, the speed is of 120 kmph and those are generally a 8 lane carriageway. They can be a 6 lane but nowadays generally a 8 lane carriageways are proposed or are used for a expressway. Expressways are controlled by MORT that is a ministry of road transport and highways under the central government.
So after the expressway nowadays the concept of green expressway or green highway is coming. The main importance or difference between the general expressway and the green expressway is that the green expressway try to use or reduce the use of virgin material for construction then reduce energy use. The more importance is given to the human health and safety. Also the use of land or improved land use is considered and communication facilities along the road are given more importance in case of a green highway. The national highway as I mentioned the national highway connects the major cities and capitals of a different state. It is not necessarily that either expressway or national highway should cross the states.
A particular national highway can be within the same state but of a high importance and designated or abbreviated as a national highway. As one of the example there is a one a short national highway in a state of Kerala. If you can google you will get the details about it. So it is around a 6 kilometer of highway but still it is designated as a national highway. National highways are second to the expressway and those are generally designed for 100 kmph. 100 kmph for national highway or 120 kmph for expressway is not a standard.
Those can be varied and those varies during the travel also. That means a one particular highway can have a certain stretch of one particular design speed and can have a different design speed for a particular stretch. National highways are generally a 4 lane and a 6 lane highway. So this is a very general but for a certain stretch if it is necessary the national highway can also be a 2 lane but that would be a very short distance and with all safety precautions. National highways are maintained and constructed and maintained by NHI. NHI is the national highway authority of India. This comes under a central government.
Next category is a state highway. State highway connects a major places within the state. As I mentioned national highway is not necessarily to cross the border but state highways will only be within the particular state. That means a state highway with a particular number can be in another state but it is a part of a different location. This connects a major places within the state. The design speed is generally between 80 to 100 kmph and can be of a 2 lane to 4 lane. As you can see as we go with lower hierarchy as per the importance the number of lanes and the speed is getting reduced.
State highways are generally maintained by a state PWD. National highways can be controlled by a CPWD or NHI. Then coming to a district road. District road connect each district and taluka places and are generally designed for a speed of 80 kmph and have a 2 lanes to a intermediate lane. So we will see in a detail when we will be discussing a cross section that what is the difference between a state highway, national highway and a district or a village road. So the configuration of a national highway and state highway in terms of cross section is generally a same. Same for the district road that major district roads and other district roads based on the configuration or cross section will be the same but the functionality will be the different.
Generally district roads are controlled, managed and maintained by the Jilna Parishat that is a district authority and a state PWD. Then coming to a village road. They are generally a single lane roads connecting various villages. District roads and village road can have a intermediate lane. Intermediate lane is a lane such that it can accommodate a two passing vehicles for a particular stretch or a certain location. So generally the width would be 3.5 meter for a village road and village roads are designed for a low speed of a generally a 40 kmph.
Village roads are generally a part of PMG-SY or controlled under a PMG-SY. So what PMG-SY stands for? That is a Pradhan Mantri Gramsada Kyojana. This is a flagship project under the BJP government or under the prime ministership of Atal Bihari Vajpayee launched in 2000 with a motive that every village with a population more than 500 will be connected with all weather roads with another all weather road. So all weather road means the road can be used in all seasons. Next coming to the urban roads. Urban roads are further classified into arterial roads or outer ring roads.
Then the city roads. Generally the intersections or junctions are a part of urban roads. Mainly the service roads are required for urban roads. Also urban roads will have a interchange that is a grade separator depending upon the requirement. So arterial or outer ring roads are the roads provided on the outskirts of the city covering in a circle the entire city. The basic purpose of this outer ring road is that if any road user want to cross that particular city without entering into a city then he can take that particular road and pass that city without entering into it.
The benefit of this road is that the traffic entering into city will be reduced that if anyone don't have any work or need not to stop within the city then he can easily bypass that particular road and it is generally called it as a bypassal. Generally the outer ring road are designed for high speed in terms of urban road category and up to a 60 kmph the outer ring road can be designed. As those are supposed to carry a major portion of high speed traffic without entering into a city so the lanes are provided on a higher side and generally of a 4 lane to 6 lane depending upon the city growth and the traffic estimation.
Next coming to the city roads they are provided for internal movement within the city and the lane width varies depending upon the requirement. City roads are mainly provided for a connectivity to the important places locations within the city such as administrative places, schools, hospitals, religious places and they are generally designed for a 40 kmph. The service roads. Service roads are provided for the connection from highway to the city or urban area. We can say these are the intermediate type of roads provided to connect a road user from highway that means to take the entry or exit from a highway to enter into a city or exit from a city the service roads are provided.
They are designed for a 40 kmph and generally have a lane width of a 3.5 to 5.5 so 3.5 is generally a single lane width. 5.5 is a intermediate lane width. Next type in terms of urban road is a junction or intersection. Junction, this is where one road meets the another road and they never cross each other. So the junction or intersection needs to be provided at the location where one road crosses another. They are a different types of junctions like T-junction, Y-junction and plus junction.
Depending upon the roads meeting each other, if they are meeting in a 90 degree and no any further road is going ahead or one particular road ends at a crossing of a main road, a T-junction is formed. If the angle of intersection is different, then it can be a Y-junction and if the road crossing is again going ahead, then that junction will be a plus junction.