Lesson finished
Up next: Classification of Roads in India by Function, Traffic and Terrain
Unlock all 30 lessons of Geometric Design FundamentalsFull course ₹40,000 · paid
Highway Importance, Design Objectives and Geometric Design Guidelines
A free lesson from Skill-Lync's Geometric Design Fundamentals course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 2 Part 1”
What will you learn in this free Geometric Design Fundamentals lesson?
This part sets the week one agenda and explains why road classification matters before design. It covers the commercial and defence importance of highways, the objective of safety and efficiency at reasonable cost, and practical guidelines such as drainage gradient limits, extra widening at sharp curves, road markings, delineators and speed limit signs.
- Why road classification is needed before design
- Design objectives: safety, efficiency, cost and environment
- Typical gradient limits for plain and hill terrain
- Role of extra widening, markings and delineators
What comes after lesson 2?
The next free lesson is lesson 3, “Classification of Roads in India by Function, Traffic and Terrain” (21 min). Later in Skill-Lync's Geometric Design Fundamentals course (paid): lesson 4, Week 1 Session 3; lesson 5, Week 2 Session 1; lesson 6, Week 2 Session 2. The full course has 30 lessons (9 h 26 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
At the start we have seen the brief overview of the highway engineering in a total as a transportation engineering. Now coming to the contents which we are going to cover up in the week one. So as we have seen the introduction in the suggestions there are few suggestions for every highway design engineer to keep in mind while designing that will not have adverse impact at the time of designing or after the designing just to avoid the reward. Coming to the classification of road. So as in a general road is a very broader term and the basic function of the road is to provide the last mile connectivity to every user. Then why the classification of road is important? As the roads will be connecting different locations of different importance and a different requirement. Every road might look the same physically but they will be having a different road.
Every road looks similar in a physical essence but every road has a different role to perform. If that particular road is connecting a major city with a time or a speed as a factor of importance then that road to be designed as a high speed road. And if we are connecting any place like any industrial or in an urban location if we are connecting a road to just give a last mile connectivity to that a household or a user then the requirement of a speed the function to perform and the traffic it carries will be a different.
So the classification of that particular road should be known to a geometric designer before designing or before starting the design of a road. So we will go in a detail of a classification of road in a coming slide. Then types of roads. There are different types of road based upon a different factor. So we will be going in detail. Then as the road is a simple element or common element but everywhere the nomenclature varies. Means a particular road will be called with a one particular name in a one country and it may be called as a different one in another country.
So in a general we will go through a classification as per AASHTO. And then we will start the basics of geometry of roadway design. In the first week of this technical series we will get to introduce the roadways and its importance. We will learn about the different classifications and types of road. This would be a bit general or introductory session but this becomes a foundation for your understanding to know the concepts in a detail. Being the classification of road is one of the important or one of the basic for every design for a particular class of road.
So to know what road is to be classified under what category we must understand or we must know the classification of road. Highways are engineered structures which are important part of everyday life, commercial and defense. The beauty of highway is that means in a civil engineering if we look at to the highway discipline the beauty of highway is that whenever we step out from our house we use either mode or either class of highway to reach out to our destination. So this becomes an important part of our everyday life.
From a commercial point of view it is useful to carry a commodity from one place to another place for a short distance or for a long distance. And the mainly and importantly as we don't directly deal with it but from the national security point of view roads plays a very important role in case of a defense sector. So we generally don't give more emphasis as a general citizen but the roads are a main cross or important part for a defense along with their defense equipment. So we need to have the strength of highways should be sufficient enough to carry the defense vehicles or defense equipment.
As I have already told you the road network is one of the best last mile connectivity improvement and proper network always symbolize the country's goal. The development of every country depends upon the development of every individual of that particular country and if we consider India the most of the population lives in the rural area. So the connectivity to every rural area or we can say a village the development of a village will contribute to the overall development of our country. Then as I already told you the road geometry is one of the branch out of a different branches of a highway engineering.
As highway engineering itself is one big area which includes road geometry, then a pavement engineering, then a traffic engineering, then a safety considerations and then highway drainage. Every discipline is interrelated with one another whereas the road geometry becomes the basis for other disciplines. Like if we finalize the road geometry, then we can finalize the pavement crust for that particular location from which it is passing. Like then we can have a soil analysis and we can decide the pavement thickness. Then at what location it is passing, we can decide whether it should pass through the urban location or is there any need of a bypass.
So those are interlinked but road geometry becomes a basis for all the disciplines. So highways are designed for the connectivity keeping the safety in consideration. So the very important part to consider in case of a highway design along with the speed and the facilities we are providing. But the ultimate or the utmost consideration is given to the safety as this facility will be used by an individual. So the harm to any individual either using road or traveling nearby the road. No individual should be suffered while using that particular facility.
So highway engineering is concerned with the position of elements of a roadway according to the different standards keeping safety into consideration. So standards are designed in a such a way that those can be used for a different situations and the safety is considered while the standards are designed in a such a way that it consider a safety along with all the technical considerations. Objectives of highway geometric design is to optimize the efficiency and the safety while considering the cost and less impact to the environment. As I mentioned safety is at most importance but as a geometric design engineer we must give a emphasis to a cost consideration.
As the highway geometry any highway project is a costly affair that means those costs very huge amount. We need to consider cost also during a design and if we are like doing a greenfield project that means if we are designing highway from a greenfield that means the land where no any existing road is there or any forest area then we should consider or we should give emphasis to the environment that we are not impacting the environment that we are not the environment that we are not the environment but as an engineer or as a geometric design engineer we should keep in a mind that we will be affecting or impacting the environment in a least manner.
The geometric design will address the requirement of the driver and vehicle considering the safety and comfort. So as a driver or as a road user if we are using the road by a vehicle means if we are not a pedestrian but if we are a passenger or a driver in a vehicle then the comfort also plays an important role in case of a highway design. So we should address the requirement of a driver and a vehicle also that means a smooth road or comfortable road will have a less operation cost for a vehicle for a long term and it will give a smoothing effect for a driver to drive.
As we are saying a geometric design what is the importance of a proper geometry any proper design will have its positive impact and in case of our proper geometry it helps in the reducing the accident. As I already mentioned safety is the main consideration and the proper geometric design will help to achieve that one hence the major objective is to provide easy traffic operation with safety at a reasonable cost. As I already mentioned every highway design engineer should keep the cost factor while designing along with the safety we should have a optimum design with safety and a cost.
Improvement of a geometry is always a costly affair that means if we have designed any road and after that we observed that there is something which need to be updated or which we need to be reconstructed with a different geometry then it becomes a very costly affair. So as a design engineer it is our prime importance to keep all the factors. From the practical point of view, keeping everything in a standard bracket or minimum and maximum requirement for all elements so that we don't have to improve it after making it fully operational. More importance has to be given to ensure the first time design takes care all the requirements of safety and cost. As I have already mentioned, all the factors to be considered are taken care while designing in terms of safety and cost.
Whenever we receive the survey data of that particular topography, we get an idea what are the locations where we need to give a more emphasis or we need to taken care at a more importance. So if we have either a site visit or if we have a discussion, then those locations can be taken care with more importance so that there will not be a further requirement of any improvement. The geometry will depend on the various factors like speed, type of road, terrain condition and other various factors which will be explained in a detail in a further slide.
As the road consists of a different element. It is a bit of complex structure to be designed. As a general citizen, we never ever observe a road in a technical manner. But as a highway design engineer, we need to consider multiple factors such as a speed, what type of road it is, what is the condition, whether it is a plain terrain or whether it is a hilly terrain. What plane and hilly terrain means will be looked in a next few slides. And other various factors that is whether it is a highly rainfall area or what type of soil is available there. Still it is not directly related to the geometric design engineer or geometry.
But we need to have a consideration in our design so that those can be taken care at a site and will not have to have any further modification. Just to give a general idea as we can see a two images on a screen. Both are I would say in a good constructed manner. But if we look from the safety point of view, the first image, the road is only constructed and only the road markings are given. But the road markings are also not in a proper or standardized manner and no road marking is given to the minor road.
So at the junction, the drivers will not have an idea regarding which lane to follow, what should be the design speed, which one to give importance. So the ultimate trust to say is that it is not important only to design and construct a road. But it is always important to give all the features or to complete the road in all manner along with traffic sign and road marking so that it will be a safe for a road user to use that. In a second image, we can see the road is with good road markings with all signs. But the important sign is a speed. And as you can see, the speed sign is under a speed.
So if sign is not visible to him, it is covered under a tree. So this should not be the case. It should be always visible from a sufficient distance to the driver so that he can approach to the junction or crossing with that particular speed so that he can manage or he can take a turn or go through the lane whichever he wants to with that particular speed. So if sign is not visible to him, he will not have a proper understanding what speed I should maintain while entering into the interchange. So these are the things which we need to taken care while designing only so that this can be taken care at the site or during the operation also.
So few suggestions, maintain a few suggestions, maintain a gradient according to NHIRC standards. So as I mentioned, for a vertical alignment or for a profile, we need to have a particular gradient or a proper drainage flow or just to meet the balance between cut and fill or the topography. So for Indian conditions, we need to maintain the gradient. So minimum 0.5% is generally provided for the drainage flow. And maximum gradient depends upon the class or type of road and the type of terrain through which it is passing.
But generally it is a 7% for a plane terrain and 10% for a hill terrain. Provide extra widening at a sharp curve. So in a detail what the extra widening means will be looked into a detail in a coming flight. But the extra widening is required at a sharp curve. Just to take care of that particular outer wheel path. We need to have some extra widening. Also extra widening gives a driver a confidence to travel over that sharp curve with a particular aura design speed. Remove cutting large and heavy stone from shoulder. Shoulder is a portion provided on a carriageway, emergency lane or for breakdown vehicle so that they can stop or they can use them for vaulting or temporary vaulting.
So there should not be any stone or any another feature like any tree is falling, any debris is there or any soil is placed over the shoulder. So it should not be there. Provide a hard shoulder in a proper width. As shoulder plays an important role for a vehicle for emergency stop. So the hard shoulder is provided after a carriageway width for a sufficient width to accommodate a vehicle. So the pavement layer or pavement thickness should be provided such a way that it should carry that vehicle also to or increase a curve radius. Always a high radius or longer curve will be a smooth for every driver to travel with a design speed.
Provide a proper road marking and road delineators. As I mentioned or explained in an earlier slide that road marking plays an important role for every driver to get an idea during the travel as it is indirect communication with a driver to follow the lanes or to follow particular speed on the road signs. Road delineators. Road delineators plays an important role just to delineate different features from the road feature so that driver will not go beyond that one. Provided speed limit warning and a mandatory signal. So there are certain signals or certain limits are placed on road design or any highway just to give an idea for a driver that he need to follow or need to travel within that particular or following that particular limit.
So there are some signs some are mandatory some are warning and some are informatory as we are not going into a detail of highway signs or traffic signs but just to get an idea that speed limit is a mandatory sign or mandatory signal for a driver that he should not drive over and above that particular speed. So as it is mandatory he will be fined or he will be charged if he is over speeding the vehicle. Why speed limit is mandatory because the speed limit plays an important role in case of road safety.