← Previous lessonFree lesson 3 of 3 · lesson 3 of 78

Unlock all 78 lessons of Drafting and Design Using RevitFull course ₹40,000 · paid

Price & syllabus
Free lesson · 27 min · no payment

Revit Architecture and Structure Tab Tools: Walls, Grids, Beams

A free lesson from Skill-Lync's Drafting and Design Using Revit course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Modeling Architectural Elements in Revit”

What will you learn in this free Drafting and Design Using Revit lesson?

The lesson goes through the Architecture and Structure tabs, covering walls, doors, windows, floors, roofs, stairs, railings, curtain systems, shaft openings and room tags. It then shows grids and levels, structural framing, columns, beam systems, foundations and rebar, and notes how structural elements feed an analytical model.

  • Wall properties, constraints and type selector
  • Grids as the reference for placing elements
  • Architectural versus structural walls and floors
  • Beam, column, foundation and rebar tools

What comes after lesson 3?

Later in Skill-Lync's Drafting and Design Using Revit course (paid): lesson 4, Adding Mechanical and Electrical Components in Revit; lesson 5, Manage Toolbar in Revit; lesson 6, Scope and Objectives of Projects in Drafting and Design using Revit. The full course has 78 lessons (30 h 35 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

In this session, we will be looking at this, looking at icons in architecture and structure tab. First of all, let us get to know about the properties window and what are the properties associated with individual elements such as walls and floors. For example, when you select an element such as wall in Revit, it opens a properties window to the left side of your screen. So, when you navigate through the options present in the properties window, you see that there are variety of properties available associated with the element wall.

It could be the location line, which is the center line or edge of the line associated with the modeling parameter. Similarly, whenever you model a wall, you need to mention the base constraint and the top constraint. The base constraint can be associated to the levels that you have created and the top constraint can be either unconnected or any of the above levels that you have already created in your model. Similar to top constraint and bottom constraint, based on it, Revit will automatically calculate the height of the wall.

If they are connected, it will be calculated as the difference between the levels mentioned. If not, it will be calculated as the unconnected height. There are several parameters such as area, wall, move, length that are associated with wall. We will go through this in detail when we are modeling wall elements for our project. Similarly, in order to model architectural wall, we will add more detailed elements to it such as doors and windows. Doors are nothing but a specific type of model element that you add to wall to load or select a desired door family into the project.

If the desired family is not available in the Revit database, Revit also provides a feature to model these custom doors and load it into your project. The way we can add door to your model element is by the icon called type selector. Similar to door, you can also add windows to the building model. Doors and windows are specified in your project model element using the type selector. Type selector lets you choose the variety of model elements from the Revit database and loop the desired family into your project.

You can choose these model elements by your convenience based on the instance or element or the parameter function associated with the modeling requirement. Similar to this door, what you can do for door, windows or any other parameter which is not available in the database is you can use Revit's custom modeling feature to model these custom doors and windows. For example, if you want to select a door to be placed in your model, in this case, we are selecting a single flush door. There are variety of instances available in your project from 30 by 80 to 36 by 84.

You can use the type selector to select either one of the door and use them to place it in between your wall so that the model element will be added instantaneously to your project space. You can select this to change the variety of the type of door element or if you are not satisfied with this type, you can also make custom changes to this family and save it as a new family. Similar to wall, door and window, there are multiple components, architectural components or architectural columns which have the vertical load bearing elements to the building model or the roof element.

For example, roof creates a building footprint based on the boundary or the layout of the project that you specify. Similar to roof, you can also add ceiling member. Ceiling helps you to create a specific level above the floor. For example, if you are on ground floor and between ground floor and first floor, you can model your ceiling element using this ceiling tab. Similar to wall, door and window, the integral part of a project modeling is the floor element. Floor helps you to align the wall boundary with the existing layout and you can create a floor boundary by aligning with the existing walls or by picking the walls tool.

Similar to floor boundaries, once you create the boundary, you can assign the desired thickness of the floor based on the type selector icon. Now, in order to model floor, what you can do is, you can see that Revit automatically creates floor plan for each level that you have mentioned in your project. You have specified level 1 and level 2 so that the Revit automatically creates floor plan for level 1 and level 2 automatically. If you want to create an intermediate level in between level 1 and level 2, you can create a custom intermediate level and then you can create a floor plan for the specified level based on the view range specified in the project space.

Creating level or datum is up to the modeler, so it is up to you to decide in which level you want to model the current floor and what is the shape of the floor and how are you going to connect one level to another. So, we will be discussing about stars and railing in a short while, how to connect different levels. Before that, when you model custom walls, you want to create a curtain system by face. Not all the walls will have a stone face or a brick wall or concrete wall.

Sometimes, you want to create a generic model or generic mass that you need to edit the profile for the curtains. Whenever you look across some shopping complex or official buildings or office buildings, what you see is, it has curtain system with glass panels in the front face or also different type of building have variety of facade depending upon the modeler's convenience or to match the aesthetic appearance. So, what will happen is, we will be working on how to create a custom face or generic model in the face of our model element by selecting the curtain system icon.

You cannot, using the curtain system, what will happen is, you need to add details to the curtain face. So, we will be using either curtain grid or curtain wall that will help us to create the horizontal and vertical pattern on the curtain grid. So, what will happen is, you can also create a rectangular mullion or a circular pattern depending upon the, what you decide. So, whenever you begin to model, you need to ask these questions to yourself. Do you want to have a curtain system? If so, what is going to be the grid pattern?

And if it is a grid pattern, what type of panel that you are going to add to the curtain grid system that defines your project's, project definition? Similar to what we were discussing a short while ago, whenever you create floor between multiple levels, you need to add connecting elements that connects floor between different levels. In this case, what we are going to look at is, star and ramp. Star lets you add to the building model by creating a common ramp, landing and support components. You can add star either in a floor plan view or in a 3D view.

Similarly, you can also create ramp, which will connect different levels by, we can place it in plan view or 3D view. What you can do is, you can specify the length and the height and so that it will automatically calculate the number of steps needed. Or now, what is the parameter between that connects the top level and current level and what is the offset that it needs to be. So, Revit makes these automatic calculations. In case, if you mention numbers that do not match the calculation, it will throw you an error message.

Whenever you model star case or ramp, you also need to consider how to create a railing in order to match the safety or also the building definitions for creating the star case. Whenever you want to create a handrail, you can create a railing sketch along the boundary of a parapet or the star case. And Revit automatically inputs the railing based on the project or the family that is loaded into your project. In case, if you do not have any railing family loaded into your project, you can choose the type of railing that you wish to use in your project from the Revit database or you can model a custom railing that you wish to use in your project.

And then you can place them based on the railing sketch. These icons such as star case, ramps and railings will add even more definition to your project. An other component that we are going to look at today is the model elements. Model text is nothing but it lets you add a 3D text to your building model. You can use this feature whenever you are modeling for a shopping complex or for an advertisement board or for an office building that needs to have a name board on it.

You can use these model text to create a name board or sign board that lets you mention the name of the building or the purpose of the model. Similarly, using this model text, you can control the font, size and depth of the text. And also sometimes you can also use different material to give variety of appearance to your text in the 3D model. These features make your model look even more realistic and lets you add a 3D model to your project. Add multiple facial varieties and convenience while you are modeling in a Revit model space.

Next to Model Text, what we will be looking is, what is the purpose of having a model line and model group in a Revit model or architecture task? Model line, let's create a 3D line that exists in the space and is visible across all the views of a project. You can all create model lines to represent a 3D geometry or you can also use the model lines to create a cable layout or the boundary that needs to be strictly followed when you are modeling the project.

Or you can also create model lines to specify certain defined points or certain points that needs to be kept in mind or not to be ignored by other team members of your project. Model group is something that lets you minimize the effort that is taken place while modeling the project. For example, if you are modeling a restroom, you will need to, as shown in this image, you will need a restroom closet, a door and the plumbing fixtures that can be grouped together so that they can be placed multiple times across the same level or in different levels.

And it will help you to minimize the effort that is taken in modeling n number of times. So, this will help you avoid repeating layouts that is common to many building projects. Whenever you are creating a building project, you will need to follow a lot of standard elements. Using these model groups to access these standard elements will help you to minimize the effort that is taken in modeling these elements from scratch. And also, it will help you to complete these models in an efficient manner. Next to these model elements, what we will be focusing on is how to annotate area or how to tag the room and area in your model space.

And why do we need to annotate or tag these model elements in our project, we will look at that in detail in a short while. So, what is going to happen whenever you create a floor, wall and model elements, you need to define these spaces by a group so that you can all create them as room or area. So, tag room is an icon that lets you tag the selected room. So, what you can do is, you can open the plan view and you can use the stone to add tag to the selected rooms that are already not tagged.

In case, if they are not specified as a room, you can use them based on the wall boundary or based on the boundary of the model element. It will automatically populate it as a room. So, you can use that room to select a tag and name the room according to your project space. If you are using a residential building, you can name these rooms as living room, dining room or you can name them as master bedroom or guest room. Or if you are modeling for school, you can name them as classroom and library.

And if you are modeling for office, you can name them as meeting room. You can name these rooms, you can use this tag feature to create appropriate tags. And why these tags are important is, it lets you create schedule and you can associate parameters with appropriate room numbers. Similarly, shaft opening. Shaft opening is nothing but, it's another architecture tool that lets you create opening across multiple levels. So, you can open a plan view and create an opening on the floor level, floor plan. And you can use the parameters of shaft opening to control the bottom constraint and top constraint of these shaft opening.

And based on the height or the depth of the cut or you mentioned in your parameter, it lets you create the opening that spans across multiple levels. The one good feature about shaft opening is, you can move them opening on one level and it will move on all the levels. For example, if you move the shaft opening in level 2, it will automatically move the shaft opening in level 1 appropriately. So, the next tool that we are going to look at in architecture tab is wall opening.

Wall opening helps you to create either a rectangular opening in straight or curved wall. Depending upon the depth and width of the opening, you can mention them as parameter and it will help you to create the wall opening in the profile that is mentioned. Similar to round, you can create rectangular for walls. Tool feature has a limitation that, you can create rectangular openings only. And in order to create a different profile opening, it is not that it is not possible, but it is not possible with the wall opening tool.

You can edit the wall family to take a profile of polygon opening or circular opening and these openings will be created in your project space. And why do we need these items in detail is that, we will be looking at them in detail when we are looking for modeling architecture and structural elements. Similarly, we looked at all the architecture tools from modeling for ceiling to wall, door, windows, curtain systems and also the shaft openings which will be useful to us. Or we can discuss their relevance or we can discuss their relevance when we are looking through the icons mentioned in the structure tab.

Structure architecture tabs contain tools for icons that are relevant to architectural modeling of the element. They do not offer in detail to the structural functioning of the member. Although you model walls, floor, columns that can be considered as structural elements, it can be, architectural wall can be strictly restricted to appearance and non-structural framing capacity of the building. Because it can still act as a facade, you can use the structure tab to model the framing system that will act as a skeleton of your building. That is what we are going to look at while we are distinguishing between these roof, ceiling, floor icons that are available in architecture and they are similarly available in the structure tab.

Now, let's dive in deep to the icons that are available in the structure tab. And we will see how they are different in the functional capacity while compared to the architecture tab. architecture wall lets you create a non-structural wall that you can create either by face weave or by revealing the profile of the wall and the non-structural element will be created. In structure, whenever you create a wall, it is going to be a load bearing in nature and you can specify the structural material corresponding to the wall.

And it will automatically calculate the analytical model equivalent of this element which you can use whenever you are going to create a design or analysis model out of your Revit project model. So, similar to these architecture and structural walls, whenever you create an analytical model, you need to make sure that you specify if the wall is load bearing in nature or if it is a shear wall and what is the structural function of the wall. So, because when the Revit converts your project model into an analytical model, these information helps in creating a detailed analysis model.

Similarly, in order to create a skeleton of your structural framing, the first and foremost tool that is essential is structural framing. You can use the structural framing tool to add individual beams or chain of beams or beams along the grid lines. Similarly, the grids and columns you can use to define the location of beams so that they are defined by a defined position because grids and levels, they form the reference layout for your project. And when you place beams across the grids, you create a certain definition that lets you place these model elements in a defined manner.

Similarly, you can not only create individual beams, you can also create another variety of framing members starting from truss or diagonal framing members such as brace or group of beams in the beam system. So, structural framing tool will help you to create frame elements varying from columns to beams. So, whenever you are trying to place these structural framing elements, the first and foremost step is to create grid. So, you can create grid by drawing a straight line or by picking a line across the edge of the existing wall or the existing model element.

So, now what we are going to do is we are going to pick a line based on the existing wall or edge and we will be defining them as grids. So, why do we need grids? Because grids and level, they correspondingly form the reference network for your project space. You know, if for example, if someone asks you a question, where is your model element such as door is located? So, you can use these grids to define this model element. So, now I have picked the two edges of the wall and named them as 1 and 2.

So, now what I am going to do is I will be, when I navigate to my float plan, I can see that the either end of the wall is navigated, is toggled as grid 1 and 2. So, now, in this case, if I want to place a model element such as door. Which will be placed in the wall. So now you can see that you can use the distance between two grids to control where the modal element is located. And if someone asks you a question of where this door is located, you can use the annotate tab to mark the dimension from either one of the grids from 1 or 2 and then you can mark the position of the door such as it will be located how many feet it is 28 feet 7 inches from grid 2.

And if a person is trying to locate this door in the field, he can navigate to grid 2 and then he can say that okay in this direction east or east direction from grid 2 it is 28 feet 7 inches and he will locate the door in the construction site. So grids help you to model them with the appropriateness, avoid human errors and it creates the certainty. For example, architectural wall should align with structural framing and structural column should align with the architectural facade. So whenever you use the grids to model these elements, it can be used commonly by both architecture and structure and it will help you to model them with ease.

Similar to structural wing, structural column adds the vertical load bearing element to the building model. So you can place the structural column in the intersection of grids or you can draw the column and then place the grid. The second method is completely inefficient and I would highly suggest you to create grids and then place columns at the intersection of the grids. Similar to architectural floor, structural floor helps you to create an analytical slab that forms the base of the building. Now structural truss is nothing but it adds truss to the structure model and you need to mention the truss cords and struts parametrically to confirm that it meets the needs of the truss again.

Similar to all these structural members, whenever you are modeling at truss, make sure that you mention these parameters or define with reference to the properties. Similar to the structural brace. Structural brace is diagonal structural member that connects to the beams and columns across different levels. So we will be looking in detail when we are navigating through structural model element and architectural model element. Now we are just navigating through the icons available. Similarly, beam system helps you to create a layout that is a system or group of beams.

Beam system boundaries can be adapt to the design and whenever you change the space or layout or gap between the members, it automatically changes the shape and modifies them parametrically and helps you to define the model that is susceptible to change along with the design. So it will help you to model these elements with efficiency. The next analogy that we are going to discuss is the beam system is conceptually similar to model group. Here, this is nothing but a model group of beams which we call them as beam system because it is created as a layout of number of beams.

That is, you group them for matching a particular design. If you change the design, the model group will automatically change the gap between the members and a specified different pattern will be created. The other important part of structural member design is connection. So structural connection tool helps you to add connection between the structural elements. If the connection add-ins are not installed, you can place the symbolic generic symbol and it will populate the appropriate properties for structural model. Similarly, the integral part of the structural model is foundation.

You can use the structural foundation tab to create a foundation that is hosted by the walls or by individual footing or isolated footing. So in this case, you can see the isolated footing is turned off because you don't have any isolated call-up members to place these isolated footings. Similarly, you can use wall foundation to pick a wall and the wall foundation will be placed. In this case, whenever you define a reinforced concrete member for project model, you need to design structural rebar. And you can create these structural rebar using the structural rebar tool.

And what will happen is, it will create the rebar layout, rebar type and the shape that you model. It will help you to automatically create rebar drawings with ease rather than modeling them from scratch using the CAD layout. So, you can use the structural rebar tool to place planar rebar or multi-level, multi-planar rebar. So, you can control the level at which you place the rebar and also you can control the parameters with which these rebars will be modeled. Along with structural rebar, you can also model area reinforcement or transverse reinforcement with couplers.

So, you can mention the type of reinforcement that you want to include in your model and also the shape of reinforcement and the nature of reinforcement that is modeled in your project. So, what will happen in this case is, whenever you model these couplers or fabric the path of reinforcement or area reinforcement. So, whenever you create a rebar end or rebar bending, so, you need to mention how you are going to place them on field and what kind of treatment that you will be giving the layout of rebar.

So, these kind of details can be modeled under the tools that are available under structural reinforcement. So, this will help you to model the structural elements with even more detail and it will help you to avoid any discrepancy or lack of details that is missing from previous versions of CAD group. So, now, when you add more details, it will help you to make your model more efficient. Similar to architecture shaft opening, you can also create a shaft opening in structure. So, in this case, you can create these shaft openings through structural roofs, floors and ceilings.

So, what will happen is, you will be typically sketching the shaft on the post element and it will span across multiple levels. And when you move the shaft opening in one level, it can move across different levels. So, now, what is the purpose of creating the shaft opening in structure and architecture? So, whenever you create a structure shaft opening, you can create a corresponding analytical version of the same opening. And it can be useful to you when you are creating an analytical model for your project space.

And when, why do we need, we will be discussing in detail how to perform analysis using the Robo Structure Analysis Tool. And it will be useful to us in combining the structure model with the analysis results.

Want the rest of Drafting and Design Using Revit?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Drafting and Design Using Revit course

The remaining 75 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Drafting and Design Using Revit course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.