Lesson finished
Up next: Steel Bridge Basics: Material, Span Selection, Loads and Combinations
Unlock all 44 lessons of Design of Steel Superstructure in BridgesFull course ₹40,000 · paid
Bridge Types by Span: Arch, Girder, Truss and Cable-Stayed
A free lesson from Skill-Lync's Design of Steel Superstructure in Bridges course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 2”
What will you learn in this free Design of Steel Superstructure in Bridges lesson?
Walks through photographs of real bridges, from stone and RCC arches to girder, truss, cable-stayed and hanging bridges. Then relates bridge type to span, from culverts and short spans to box girders, trusses up to about 90 meters, and special long-span structures.
- Recognising arch, girder, truss and cable-stayed bridges
- How span length drives the choice of bridge type
- Box girders up to about 60 meters
- Trusses and special structures for longer spans
What comes after lesson 2?
The next free lesson is lesson 3, “Steel Bridge Basics: Material, Span Selection, Loads and Combinations” (33 min). Later in Skill-Lync's Design of Steel Superstructure in Bridges course (paid): lesson 4, Week 2 Session 2; lesson 5, Week 3 Session 1; lesson 6, Week 3 Session 2. The full course has 44 lessons (15 h 38 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Okay, so different kind of, you know, bridges that we have discussed a little bit. Just I'll try to correlate them with some pictures from the site, you know, what different sort of bridges we have. We discussed based upon various parameters of loadings, of spans and other things, general things which are there for the, you know, for the bridges. But as you can see on the screen now that this one is the oldest kind of a bridge that we have. So most of the time, if you see in the medieval age and even in the historical bridges, they are nothing but the compression member arches, right? Arches made up of stone or RCC, that sort of arches are, you can easily see. They can easily be used up to, you know, smaller spans as well and for larger spans as well because we can have the largest spans.
As well where we can, you know, we can use a bigger arch on that perspective and based on that we also can have, you know, you can see this is one of the girder bridges. So as the length increases, we need to change our system of loading as well as, you know, we have to take care of various aspects of articulation as well, right? So if you can see on my left, this is a hoover dam bridge. So you can see a big arch is there. This arch is particularly acting like a, like a soil for the upper columns because all the pressure is coming out on that arch.
And then based on these arch designs, we can design these columns. And on top of that, it is simple beam. So basically we made a arch as a restraint system for these columns. And on these columns, then we have designed our beams. Now, if you can see this picture, this is a very famous bridge from San Francisco. I mean, most of you are already have seen this bridge. So this is cable state bridge and they have used the pylons. As you can see, these, these bigger columns, they are known as pylons.
So most of these, you know, cables, they are tension only cables, right? They, they only take out the tensions that are, which are being developed in the system. So mostly these pylons, we try to keep them away from the water. You can see these, these mostly are used in the longer span. So we might have, you know, in India, very famous, you know, bridges are there. One of them is in Rishikesh. If you can see that hanging bridge, it is known as, and also, you know, there are other, there are other, as well, as you can see, this is, again, table state bridge, which is, see what link is a very famous bridge. And then on the top, you can see a combination of a steel girder and a truss bridge.
Okay, so on the left approach side, we have a steel plate girders. And on the right of that, we have a truss. So based on that, I mean, steel and truss on the left, this is steel and the right also a truss bridge. So these are the different kind of bridges that we can have in the beams as well. We can have RCC beam, which is the reinforced concrete beam, or we can have a PSC, which is again, pre-stressed beam, or we can have a steel beam.
And otherwise, we can have other different, like other approaches that I have told you. There are other few different structures as well, like extra doses there. And also, you know, PSC is very famous bridge that generally people, you know, most of the constructions are, these are the typical bridges that I have shown you. But if you see 90% of the bridges, they are most likely, you will find out they are the girder bridges, because, because of ease of construction, and also, ease of analysis as well, because you cannot make complex bridges everywhere. Okay, we only make such complex, they are costly as well.
So cost is also one parameter that we have to take care of. Okay, so based on the spans, based on the analysis part, based on the construction ease, based on the amount of construction, the economy part as well, we decide what sort of bridge we are going to construct. Okay, so having said that, if I just put some light on span classification, so bridges are also classified according to the spans into the following subcategories. So the first one, I'll read this first, then I'll explain one by one.
So culverts. So culverts are the bridges up to span of 6 meters. So basically, the smaller span structures which are cross-drainage structures are maybe available for crossings, but span is lesser than 6 meters. So mostly they are provided for cross-drainage or you can say for, you know, balancing culverts, like if you are throwing water from one side to another, you need to balance the water out throughout the stretch. So these are the balancing culverts which are provided up to the 6 meters. So they can be a kind of a slab culvert can also be there or it can be pipe culvert as well. It can be a box culvert as well. It can be a frame culvert as well.
So it depends, I mean, what sort of loadings are coming on. It can be arched as well, like I have shown you. It can be arched as well. So it depends. It depends on various factors, various external loadings and, you know, different aspects of designing. So like other four or five factors that I have told you in the previous slide, everything applies to the span classifications. So culverts, they are, I mean, CD structures, we call them, the cross-drainage structures, very important structures, although they are lesser than 6 meters, but very, very important for the, for the highway. Then short span bridges, I mean, they are the one which spans from 6 meters to 40 meters, also known as minor bridges.
Minor bridges definition goes from 6 to, you know, 60 meters, but short span bridges, if we talk about 6 to 40. So above 6 meters, up to 12 meter, we can go with slab bridge. Okay. Above 12 meters, we go generally with the RCC beams, because 10 to 12 meter is a, is optimum utilization of a slab. If we go beyond that, then that will be an uneconomical section. So we try to convert that into I-beams or T-beams or U-shaped beams. Okay. That will save a lot of concrete for us. So up to 20 meters or 22 meters, we can easily go with the RCC beam type bridges.
Once we jump up, up to 20 meters, then we have to provide some sort of pre-stressing in that because 22 meters is, is, is a too long for a, for a length. It is almost 66 feet. So beyond that, we generally provide the pre-stress cables. Okay. So up to 35 or let's say up to 40 as well, we can go with the pre-stress cables. Very easily we can construct those and PAC cables, you know, uh, that enhances our capability of the structure to contain the movement capacities.
It, it really enhances really nicely. Then we have medium span bridges that are ones from 40 meter to 125 meter. So in that it starts with the, uh, box girders. So up to 55 or 60 meters, we can easily go with the box girders. Okay. Uh, or you can see, you have seen that Metro, uh, beams as well. So they, they are nothing but the segmental box girders. Then beyond 60 meters, we generally go with some trusses. Okay. The bow string trusses there or a pad, pad type truss or K type truss.
All these kinds of trusses can be, uh, used till 90 meters of the span. Now beyond, uh, beyond that, uh, we generally have to go for the special structures like the arts that I have shown you and the hoover dam. So that sort of structures we need to develop if we are going beyond 90 meters and, uh, the long span bridges, you know, any bridge that spans beyond 125 meters. So, uh, then again, they are the bridges, which are, uh, you know, mostly like cable stay bridges or extra dose bridges or, you know, special structures.
So they're very, very rare bridges, but, uh, yeah, when, when we have a situation where the, uh, the, the length of maybe a valley or maybe the river is too huge for us to put any pier in between, we have to go for such spans. You know, uh, we, we, uh, we cannot put a pier in a, in a valley, uh, which is, let's say 70 or 80 meters deep. It, it will be very difficult to construct a pier this much deep, although, uh, we, we do have some constructions like that as well.
Sometimes the feasibility is not there. If you see, uh, in, in the state of J and K, a very beautiful bridge, uh, which is almost similar to, uh, uh, look like, uh, uh, arch bridge, but a very, very beautiful bridge. Uh, railway bridge has been constructed, uh, over river Jhelum, I believe, uh, but you can check on that. I mean, it is, it was in the news as well recently. So it, it will really help you to figure out that what sort of spans and how you decide, uh, for which span you need to put what kind of structure, right?
It all depends on your articulation. I will repeat again articulation means, uh, how you are, uh, setting your system up. Then you have to set your geometry part. Then you have to set your loading spot. Then you have to set your cost of construction as well. And then you have to check the feasibility of the structure as well, right? It should be safe at the end of the day. Uh, economy is, yes, it is one factor, but safety is the prime factor. So nothing can, you know, uh, Exceed the safety factor. If it is not safe, even if it is less costly, we cannot go with that. We have to first make it safe. Then we have to see what cost is there. Okay. So make that habit in your career, in your calculations as well. That structure should be safe first. And then you only should go with the other aspects of doing it. All other four or five aspects that I have told you.
You should go with those aspects only once you have the safety factor intact. We can take a look at why it's reinforced concrete. What difference does it make to design a reinforced concrete or a steel girder or even a simple reinforced masonry bridge? We can see this is the longitudinal section of a simple girder or beam and how it is loaded. And we can see how a cross section can look like for this particular beam. If it's a reinforced concrete, we can see there are three reinforcements. Some reinforcements can be provided and the concrete section can be provided.
And if it's a beam section, we can provide a simple eye or a box and other type of sections in steel. Masonry, we can see that multiple blocks of masonry and connected through cement or other cementitious material. The failure of the same will become somewhat very different when we come to design them. For instance, when we go for a reinforced concrete design, the failure basically happens in the form of cracking from the bottom. So, the concrete initially cracks from the bottom and then they expose the steel or the steel directly fails in the ultimate limit steel.
That's how the failure occurs over here in a simple RCD. In very few cases, you can see the shear failure that creates diagonal cracks near the supports. That's how a RC girder fails. But when we go for a steel girder bridge, the behavior of the failure completely, because here there is no reinforcements, in most cases it is directly the steel girder. So, how it came, mostly due to the buckling of the top, if it's a non-compact section as you call it or a section that is prone to bucking, you can say that the top flange buckles away.
So, the top flange is in compression and it is not restrained. So, it tends to move one side or the other side. So, this effect is called lateral rational buckling. So, effectively, the moment of inertia of the section reduces because the top flange is not effective in taking compression. So, a certain height up to which the compression is limiting, that becomes effective in compression and the bottom induces higher and higher tension. At a particular point, the higher tension cracks the bottom section and then we see the failure.
Or the same can fail due to the buckling of the webs as well in case of supports. If it's a non-compact section, that is a class for section in Euro code or in Indian code as well. And in certain cases, if the failure is governed by plastic or elastic design, then we can see that under the section where the load is acting, you can see where the maximum moment is acting, you can witness the cracking of the bottom flange or the top flange under continuous loading.
So, that is how the failure happens in a non-bucking member. So, this is our steel section. The behavior of masonry could be completely different due to the axial force. They can crack similar to that of a concrete section in shear. And in tension, they could behave quite differently in certain cases. The difference is in elastic modulus of the brick and also the cement. You can see the cracking of bricks in transverse directions, which is somewhat not that evident or visible. In certain cases, they can directly crack.
The cementitious materials can crack and the bricks are exposed and they crack in that way. So, that is how normal masonry wall or a beam could fix. That is why beams are not generally provided for in masonry. Sorry, masonry is not provided for any beams, but is preferred in arches or in case of... So, having said that, we have covered mostly in this session the introduction to the bridges. So, we have covered everything right from the ethnology to the description to the type of bridges and how we construct them.
Then, a little bit we touched about the component of the bridges as well, where we talked about superstructure, substructure, foundation, little bit about the bearings as well. I hope when you next go to any bridge nearby, you will be able to understand easily that, okay, this is the superstructure, this is the bearing, this is how load is being transferred to the substructure and then to the foundation part. So, based on that, we then discussed upon the type of bridges, I mean, I showcase you with the help of some pictures as well and some different methodologies that we adopt to figure out that, okay, these are the bridges that we have to put on, right, right from the very basic of culvert to short span to mid span to the longer spans.
So, most of the structures, I mean, if we talk about the majority of the structures, they are the smaller spans and then short spans. I mean, as we move towards the longer spans, the number reduces significantly, okay. So, that's all from this very first presentation of this course. I hope now you are able to understand what are different type of bridges, how we look out at the component of the bridges, what is their functionality, how the load mechanism works around the bridges and then how you decide which type of bridge to put where based on the superstructures, right, based on the culvert, short span, mid span or a longer span, right.
So, based on these findings, these learnings, we will move to the next chapter, which is chapter 2, where we will, you know, talk more about steel superstructure as well and also about more about the bridges as well. But as far as the introduction to the superstructure and bridges, I think that's all from the first slide. Thank you so much.