Unlock all 54 lessons of Design of Bridge Foundations using STAAD.ProFull course ₹40,000 · paid
Bridge Types, Materials and Span Categories Explained
A free lesson from Skill-Lync's Design of Bridge Foundations using STAAD.Pro course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Staining Design and Reinforcement for Well Foundations”
What will you learn in this free Design of Bridge Foundations using STAAD.Pro lesson?
The instructor introduces the course and defines a bridge as a structure that crosses an obstacle without closing the way beneath. Bridges are sorted by superstructure (slab, beam, truss, arch, suspension), by material (timber, steel, RCC, PCC) and by length, from culverts under 6 meters to minor bridges of 6 to 60 meters.
- Definition of a bridge
- Bridge types by superstructure and material
- Difference between RCC and PCC
- Culvert, minor and major bridge span limits
What comes after lesson 1?
The next free lesson is lesson 2, “Bridge Functions, Location Studies and Main Components” (22 min). Later in Skill-Lync's Design of Bridge Foundations using STAAD.Pro course (paid): lesson 4, Design and Analysis of Reinforced Concrete Columns, Walls, and Beams; lesson 5, Structural Irregularities and Their Implications; lesson 6, Notional Horizontal Forces and Frame Imperfections. The full course has 54 lessons (23 h 25 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Hello everyone. Today we are going to learn about what actually bridges and their foundations are. So before starting this course, which we will be covering in, you know, few lectures up, I want you to take up this course not only as, you know, knowledgeable part of your course, but also keep your, you know, mind open that after this course or maybe during this course, if ever you are visiting a road, a bridge, or even if you are looking at the picture of a bridge, you should come up with those kind of, you know, curiosity that, yes, this is the bridge, this is the foundation, this is the, those components of the bridges.
So always keep your eyes open about this to make it more interactive, I would say, and to make it more interesting as well. So in this course, we will be covering everything about the bridges and its foundations. So let's start with the first slide. Yes. So bridges, we will cover the introduction part of the bridges, what different kind of, you know, types we have for the bridges, what kind of materials we use for the bridges. And then you may have seen, I mean, a lot of bridges in your life and your span, whenever you're moving on a road, you see a lot of different kinds of bridges.
I mean, small bridges, bigger bridges, different kinds of materials, steel, concrete, some, some timber as well for the pedestrians and different shape as well. I would say, like, if you go to see a flyover, it is different. If you just go to a small bridge, it is a different. And then we may have some small culvert type as well, which are just the, you know, drainage structure, cross-drain structures. And then sometimes we have viaducts. So we'll cover all those steps one by one. And we'll try to, you know, correlate those things with your syllabus as well, because even at any stage, you can, you know, correlate with that.
If you are a civil engineer at how different kind of your subjects are being, getting captured into this engineering. It's not just like a bridge means you're only doing the structures. That is the one of the, you know, wrong thing. I would say if you take up this thing that you are only will be doing the structure part, but you will be doing, you know, just to mention few, you have to start with the survey parts. You have to do the geotechnical parts. Then you have to, you know, do the highway part as well.
Then you have to do the hydrological part as well. Lastly, you have to come up with the structural part that what concrete or whatever, I mean, structure you have. You need to design that as per the total provisions. So what are the factors that determines its location? So we are going to cover that as well, that how we come up with the location that, yeah, this is the location where we have to put this bridge. Maybe it can be a river, which is quite obvious in some times, but sometimes it is not a river.
You see, there is a bridge or sometimes you see a flyover that why we need a flyover over there. So those kind of, you know, different factors are there that helps in determining us that where we have to put our bridge actually. And about the components we will discuss in detail in this PPT while further going on, what different kind of components we have. We have superstructure, substructure, and then the foundations. So in this PPT, we will cover those things briefly, but majorly this course, as I mentioned earlier, is about the foundations.
So we will focus more on the foundations. So by foundations, I mean, it is that part of the bridge which is not visible with the naked eyes. But, you know, the foundation is the one which is getting most of the loads on it. It is bearing all the loads on top of it. We may not see it, but it is one of the most integral parts of the bridge. So when we talk about the foundations, we have different types of foundations. We'll talk about it later on, but just to give you a brief idea that what different types we have.
We have shallow and deep foundations mostly in the bridges, and then they can have different, you know, type of arrangements, which goes on. And then we will talk about the loads as well, like what different loads as per Indian Road Congress, as per Indian standards, we have to take up to, you know, design a foundation, I would say. So and also not only to design, but also we need to check about the different stability criterias. The foundation has to be, you know, stable. And then we go with the RCC design or steel design or whatever material it is.
And then we talk about its design. And the most important thing, failure. So that's how I say that why we design it, that we have to take care of the failures first. So if we know that, yeah, this particular component is going to fail in that direction or due to this load. So there we, you know, come up with a different technique maybe or a normal criteria, I would say, for the designing purpose. And then finally, when we are done with the site reiki designs and all this stuff, then the last step, as you all know, is the construction.
You know, we can design all sorts of things, but we need to execute them perfectly as we did in the design on the site as well. So that whatever we have designed on paper, it should get replicated in the construction as well. And also, you know, matching up the criteria of the site investigations and on paper, sometimes, you know, it happens that you may not get the same strata, same survey, same highway that you have got on your paper. On the site, it may vary. So, you know, keeping that in intact and then making a bridge in between them, I would again use the term bridge to make a bridge between the construction and your design.
It's one of the most important parts so that whatever we have designed, it should be there. It's not like that. It should not be there. So in this course, particularly, I would say following these are the learning objectives that we will take up during the course. So to have a basic understanding on bridges, like I first told, and then the factors determining their locations, that is one of the most important thing to know the different types and the components of the bridges. So, like I said, different types by I already mentioned that we have different types like flyover, bridges, culverts, and sometimes there is a bridge between the valley as well.
But there are very few in India as of now. But yeah, we go for those as well, wherever the need is. Then we have different types of spans as well. Depending upon that as well, we will learn in this and the components of the bridges that we will also cover that. Then to know the types of foundations, that what different foundations do we have, the types and the loads, different kind of loads that will act upon them as per the Indian Road Congress, like I mentioned.
And to learn about the design checks, the failures, and the construction of the foundations. And one of the most important aspects, like I just mentioned, that not only the design, but the correlation between the design and the construction of foundations. That is also one of the important parts that we will learn going forward. So we'll start with the bridges. So what, I mean, whenever you go on a road or you see in a picture a bridge, what comes up in your mind? Just, you know, I want you to question yourself.
If you hear a word bridge, what does that mean in your mind? So just, just by that definition, we see it as a structure that bridges the gap over an obstacle without closing the way beneath. This is, this is important thing that sometimes we can have, you know, a RE wall as well. We close the way beneath, but in a bridge, in case of a bridge, we should not close the way beneath. We may have a different kind of ways beneath, and we can have a flyover where the vehicles will move beneath it.
We can have a bridge over a river where, you know, water flow through that bridge. And sometimes there can be pedestrian bridges as well, where the pedestrians will pass through that bridge. And sometimes it can be a canal as well. You know, we make a bridge over the canal as well so that we don't, you know, hamper the ongoing of a canal. Or sometimes it can be a pipeline as well. So by pipeline, I mean, they can be, you know, a normal gas pipelines or petroleum pipelines, which we should not hamper.
So we generally build a bridge over it so that, you know, it doesn't hamper it. So it can be used to cross a river, like I mentioned, a river bridge, like you can also see in your screen on the right side. There is a bridge, which we can see, which is made up of steel, but we have a river going beneath it. So this is a river bridge. And then these are the arch bridges, as we can see. And it can be over a valley as well, a railway as well, or a valley as well.
By railway, I mean, they can be, you might have seen a lot of flyovers. Maybe in your city, you have seen the railways passing through and you have a, you know, bridge on the top of it that if you are moving on a road, you just cross the railways and you don't hamper the movement of the railways beneath. And then they can be sometimes on the valley. If we move to the mountainous areas, there can be a bridge over a valley as well, where we just connect those two valleys with the bridge and we can cross the bridge with the help of that.
So these are. General definitions I would like to say before moving forward that any structure if you see that that helps you to cross over the obstacle without you know closing the way beneath. So that is called a bridge and it can have various purposes so for which it helps to cross beneath and then by the types of bridges they can be a lot of them but we will try to you know bifurcate them as per the different terms that we will use slowly like here you see like based on the type of the superstructure so if if I say superstructure so by superstructure I mean everything of the bridge which is above the pillars even the bearings comes under you know substructure sometimes so sometimes we take up it in superstructure so everything which is on the top which is on the top of a bridge is called a superstructure so sometimes we can have a slab bridge where the spans are quite less we generally go up on the bridges of around 10 to 12 meters with the slab we don't go beyond that so that's all about the slab bridges that we can have if the span is too high then we don't go with the slab bridge then we have to go with the beam bridges and even in the beam bridges we can have you know two kind of different parts it can be RCC I hope all you know the RCC beams you know you may have done in a course or you may have seen those kind of bridges RCC bridges T-beams or sometimes it can be PSE as well if the span is a little more than 20 meters so in the PSE we can go till 40 meters I would say and if you are going beyond that we can have a box girders as well or U-type girders like we see all time in metros composite girders as well so those sort of things are there and then the truss bridge like I showed you and the previous picture most of the railway bridges in India are made up of trusses truss is a simple structure I hope most of you know about the trusses so whenever the span is large it goes beyond 50 meters or 55 or 60 meters and maybe in the case of where we cannot put a pillar in between so we go for the truss bridges mostly in the railway or maybe in the valleys we use the truss bridges because it is you know we can construct it on the off site and then we can just shift it on the site it will not take much of the time then cast in situ bridge and then we can have arch bridges we have a few of them I mean in India mostly arch bridges are made up of missionary the old bridges but if we see in the various countries we have those kind of you know arch bridges inverted arches three hinged arches sometimes normal arches as well sometimes arches with the help of hangers they have those sort of bridges as well and then in the last we come up with the cable state the suspension bridge most of you people have seen those kind of bridges cable the one very famous pamban bridge in India which is there and down south and then we have Sea Worley Lake in Mumbai I mean most of you must have seen that bridge so we have these kind of you know different bridges that based on its superstructure so it varies you know the span varies as per the demand demand of the site demand of the the river sometimes demand of people moving beneath it I mean in the in the state we have different clauses for that if we have a village road we don't have to go up with the bigger structure but if we have a state highway crossing a national highway then we may have to go with the you know a bigger bridge may be a flyover that that you might have seen so these are the demands of different aspects which we have to cater upon and then decide that yeah we have to go with the this this bridges what can be safely done in those sort of things and then like I mentioned different type of bridges that based on its material so if we go in the hilly areas or if we have the pedestrian bridges that that are made up of timber that are made up of stone so these are not you know those bridges which can carry huge loads of vehicles or you know heavy materials it cannot do that it's just for the you know for the pedestrian for the cycles or maybe if if you are connecting to remote villages in a hilly area or somewhere you can just make a smaller bridge of timber or a stone bridge then we can have a steel bridge then we can have a steel bridge like we mentioned a truss bridge or sometimes a steel composite as well where we have a slab of concrete on top of it but otherwise we have a steel girders beneath it we generally put those kind of bridges and the railway for bridges then we have the concrete bridges where everything is made up of concrete it can be a slab RCC bridge and all the other components are always made up of concrete and in the RCC bridge it's normal reinforced concrete bridge PCC bridge so that's very interesting to have a difference between the RCC and the PCC so RCC is reinforced cement concrete and PCC is plain cement concrete so when we have a cracked section as per our designs we go with RCC but when we don't have a cracked section so by cracked section I mean we have to put reinforcement into that if the section is cracked so then we go with the RCC but if the structure is smaller and we don't have you know those kind of stresses that can develop a crack into it we go with the PCC bridge which is plain cement concrete obviously with you know minimum kind of steel on the surface surface reinforcement as we say to avoid temperature cracks but yeah the PCC bridge so the middle difference between these two that in PCC we may have bigger sections but in RCC we can have smaller sections but with lot of reinforcement so the economy also play a role to decide that what kind of bridge you want to put in and then the composite bridge like I told the steel plus concrete combination where we have a beams of steel at the bottom and then a concrete slab on the top and then the aluminium bridge which is not a very famous but because the aluminium is not a good load bearing the material so we generally use these kind of bridges just for the pedestrian purposes mostly used material is concrete and steel now and in concrete it's generally RCC this is is not used widely because it's not you know properly accepted material for the financial high base and the important roads so RCC bridge I would say the concrete bridge and the steel bridge these three materials are there which are readily used and I would say 99.9% of the structures you see on the road today are made up of RCC and VCC and few of them I mean the older structures are made up of masonry as well but now they don't take up masonry they they just go with the RCC or the steel that that are the widely accepted materials right now in the market so we can also bifurcate the bridges are based on X relative position between the bridge floor and the superstructure so we can have a suspension bridge we can have a deck to the bridge so those kind of you know or different by suspension bridge you mean I mean it's a bridge which is like a hanging bridge just the support the supports the pylons are on the end and it's just hanging in between so again in India it's not of you know widely used bridges and then in the decks through bridges we have a deck which is moving through a bridge so by deck I mean a complete slab this term I would use in in further presentations as well so by deck we mean a concrete slab through a bridge so all the bridges that I mentioned earlier were the decks deck through bridges and then we have based on the length by how we you know differ the bridges based on its length so first of all comes up in the culvert bridge the bridge which is of span less than 6 meters I mean the width can be anything but if it span the crossing beneath if it is less than 6 meters we call it a culvert bridge so these kind of structures are just there for you know over the small nullas or maybe cross-train structures or maybe we just provide it just as a balancing culverts just to you know so that the water don't get stagnant or sometimes we have line drains going parallel to the road you may have seen on the road that we have drains going parallel to the road so sometimes we have to open up those drains somewhere we need to have some you know outflow from those drains so we provide those kind of culverts for that so in culverts it can be you know a box kind of a structure a slab kind of a structure or sometimes it can be a pipe as filled where there is not much of a flow and it's just there for the drainage purpose so we just provide one or two pipe sometime so that if there is any you know water logging or sometimes the rain is there and the perennial times the water can flow through the road it should not you know hamper the flow of the water that can hamper our road as well so moving ahead with the minor bridge so if this pan is larger than 6 meters you But it should be lesser than 60 meters. So any structure which has a span length from 6 meters to 60 meters, it comes under the category of the minor bridge.
I mean, it can be 2 span, 3 span, 4 span, depending upon the availability and depending upon its usage, different kinds of spans can be there. If total length is lesser than 60 meters of all those spans, then we call it minor bridge. Again, it can be, you know, any kind of structure, slab, RCC, PSC sometimes, or truss maybe. If you have a truss less than 60 meters, the category still shall remain as a minor bridge. And then we have, if the bridge is greater than 60 or let's say 120 meters, we call it major bridge or as you can say long bridge.
If we have, you know, huge rivers like in India, there are a lot of them. There are so many bridges over the river Ganges and other few rivers as well. There are Yamuna River as well. In Delhi, there are a lot of bridges. And then we have different, you know, other rivers as well where we have those sort of major bridges and the long bridges. And then again, in major bridges, generally, they use maybe the RCC superstructure or PSC. And we generally avoid slabs because the span is quite less than the slab.
So the most of the time, it is RCC, PSC or maybe a steel structure.