← Previous lessonFree lesson 2 of 3 · lesson 2 of 54Next lesson →

Unlock all 54 lessons of Design of Bridge Foundations using STAAD.ProFull course ₹40,000 · paid

Price & syllabus
Free lesson · 22 min · no payment

Bridge Functions, Location Studies and Main Components

A free lesson from Skill-Lync's Design of Bridge Foundations using STAAD.Pro course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Calculation and Analysis of Loads on Pile Caps and Pier Shafts”

What will you learn in this free Design of Bridge Foundations using STAAD.Pro lesson?

The lesson classifies bridges by function (aqueduct, viaduct, pedestrian, highway, railway) and by span relationship (simply supported, balanced cantilever, continuous, integral). It then lists the studies behind choosing a bridge location, including hydrology, geotechnical work and earthquake zones, and names the superstructure, substructure and foundation parts.

  • Aqueduct, viaduct and railway bridge differences
  • Simply supported, continuous and integral bridges
  • Surveys and hydrology that fix bridge location
  • Abutments, piers, bearings and wing walls

What comes after lesson 2?

The next free lesson is lesson 3, “Why Bridges Need Foundations: Shallow and Deep Types” (18 min). Later in Skill-Lync's Design of Bridge Foundations using STAAD.Pro course (paid): lesson 4, Design and Analysis of Reinforced Concrete Columns, Walls, and Beams; lesson 5, Structural Irregularities and Their Implications; lesson 6, Notional Horizontal Forces and Frame Imperfections. The full course has 54 lessons (23 h 25 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

We may have, you know, different kind of bridges based upon their functionality. Their function is where we have to put that bridge according to their function. So the first in this category is aqueduct. So when we talk of aqueduct, aqueduct is something, I mean, it's a kind of bridge which is carrying, you know, the canal water over it. So here is a place where, you know, we have a different distribution of water everywhere. So we have to, you know, shift the water from one place to another.

Like Indira Gandhi Canal is there in North India. So we have to carry it sometimes over the river as well, the canals. So the rivers which are carrying those, you know, sort of canals, they are called aqueducts. I mean, it is basically a bridge, but it will not carry any vehicle loads or any other kind of loads, but it will carry the water load over it. It's a kind of a structure canal over the bridge. And then we have a viaduct. So basically viaduct is nothing but the flyover only, but up to, you know, a long flyover, I would, you can say, when we have a length which is, you know, covering almost all the project stretch on a different level.

So that sort of, we call it viaduct. So sometimes it's a confusing term that we are saying underpasses, flyovers, viaducts. So my suggestion in this, if you have a smaller structure where you just have one opening, it's basically called a underpass. Or you can say it's a flyover as well, that you just have one opening. But when you have multiple openings, let's say your flyover is moving maybe one kilometer up away. So those kind of structure, we generally refer them as a viaduct. So it can be a flyover, we can call it as flyover as well, but we cannot call underpass as a viaduct.

Then we have a pedestrian bridge. So pedestrian bridge is basically a small bridge where the loading will only be for the pedestrians or maybe the cycles. So you may have seen a lot of them, I mean, over the busy roads. Sometimes we have on the railways, we generally have those kinds of pedestrian bridges where we have to, you know, cross one platform to another platform. Then we use those sort of bridges. Then highway bridge, this is the most common bridges. So highway on national highways, on straight highways, even on smaller roads, we have the bridges which are connecting different highways at the same time.

And then we have a railway bridge. Then again, in railway bridges as well, there are two sort of bridges. The traffic is moving over the railway line. So that is called railway over bridge. And sometimes we may have a kind of an underpass system, which is called railway underpass or underbridge, you can say, or UB. So in that case, the traffic will, you know, go from down and the railways will be operating on the top of it. So that is a small description about the railway bridges.

So it is also, you know, a point to be noted here that the railway bridges are one of the most important bridges. So when we are building, you might have seen that generally they use those kind of structures and railways, where we can replace things pretty quickly. Like they generally use steel composite girders or maybe box pushing methods, the box structure where they will push it overnight. Because in railways, we cannot, you know, interrupt the traffic for so long. In highways, we have alternatives, but in railways, we generally don't have so many of the alternatives.

So these are kind of important bridges. So these things needs to be taken care of as well when we are, you know, proposing a bridge. Then this is also one road come rail. There is one in Bihar in India, which I can give example of. So we have a bridge where there is a road and railway going parallelly on one another. So it's like a double-decker bridge. So we have a railway beneath and we have a road on the top or vice versa as well. We can have a road and rail differently over a river.

So most of the bridges, you know, the iconic bridges, the big bridges, they are in the state of Uttar Pradesh and in Bihar and a few of them in West Bengal as well because the river Ganga crossing these states. So we have to, you know, put a lot of bridges there over the river Ganga. So moving forward, then types of bridges that based on the interspan relationships. So like I mentioned earlier, the span. So span is nothing but the opening pin of a bridge. So we can have, you know, different interspan relationships in between the spans.

We can have a simply supported bridge. So this is the most common type of bridge where, you know, our slab, our RCC beam or maybe a PAC beam or any structure which I mentioned earlier. So they are simply supported on the substructures or on the supports. I hope most of you are aware of this term simply supported, but just to, you know, refresh those memories. So by simply supported, we mean we just have a pin bearings on the top of it. We don't allow the movement to, you know, restrict at those points.

Then we can have a cantilever bridge. This is generally made a balanced cantilever, I would say. It's not just a cantilever bridge. So we construct a balanced cantilever bridge over where we have more spans. So the methodology is simple. Like we keep on, you know, putting a weight on one side and then start constructing the cantilever kind of a thing. I hope you know what is cantilever. And then the continuous bridge. The major difference between the simply supported and the continuous is the continuous, all the forces, they are not restricted at one support.

So we have a continuous, I mean, the forces, we don't allow them to, you know, have a, we just restrain those forces. In simply supported, we allow them to, you know, just as a pin, but in the continuous, we don't allow the movements to flee at that point. And then in, sometimes we can have a, amalgamation of those as well. We can have the integral bridges. So in integral bridges, we, we don't have, you know, those kinds of bearings. We just connect the substructure with the superstructure.

So by substructure, I mean the bottom part with the top part with the help of reinforcement, of course. But we don't provide any sort of bearings in that. So those are the integral bridges. And then based on the type of connection between parts, this is mostly about the steel parts. When we talk about the steel composite or maybe steel beams or maybe truss bridges. So we can have a pinned connection bridge where, you know, we have to pin the connections. We can have a riveted connection bridge where we have rivets as a connection that we need to design upon.

And then this is one most common thing, the welded connection bridge. So wherever we have to put the connections, we generally give a weld. So maybe in your degree or maybe in your courses, you have calculated that, that how much you weld you have to, you know, provide in just to check the strength or maybe enhance the capacity of the sections. So sometimes we do the weld, sometimes we do the rivets and sometimes we do the pin connections as well. So this is all about, you know, different kind of connections and the interspan relationship between the bridges.

Okay. So after, you know, defining all those sort of things that we have in a bridge, these are a few points that should be considered for a bridge location. I mean, whenever you see a bridge, I don't know if that question comes to your mind or not. But for a general query of most of the, you know, people who are not into the sector, they ask that why you have put this bridge at this location or why this much span or why so much height? And the very most common that if you have designed one sort of a bridge, then why you have to design so many of them, you can, you have designed one, you can just put those bridges everywhere.

So I try to, you know, answer all these questions through these points. But the first point that comes to the mind is the selection of the right side as a crucial decision and the planning and as well as designing of a bridge. Then what studies that we generally do as a preliminary survey for deciding the bridge location. So like I mentioned in my earlier slides that bridges not only cover, you know, the designing, the structural part of it, but it also covers other subjects as well.

So to name a few, I would start with the survey. So we always just go on sites and start our surveys if we, you know, have to build a bridge. So we need a survey of that topographical survey of that area. And we also, you know, do the traffic studies that why we need a four lane, why we need a six lane. So those sort of things are already there that we have to, you know, do some preliminary calculations to reach upon those points. So we calculate those things in the traffic surveys and we calculate the MSA required over there.

And then we go with that, yeah, this lane is two lane and the traffic is more. So we have to go for a four lane. So after deciding that, the survey is also done. So the position is mainly determined by, you know, one is the highway, wherever we are crossing our highway. So it may cross a river. So that is one of the easy thing to, you know, find out that, yeah, this is crossing a river. So we should provide this much bridge over it. But for that as well, we need to do hydrological calculations first.

So by hydrological calculations, I mean that we have to check the rainfall data of 100 years back. And then we have to calculate the catchment areas of the particular place of a bridge. And then we have to calculate that how much discharge will flow through this bridge. For that determines our number of spans or a linear waterway, I would say. Okay. So, we fix our linear waterway with the help of hydrology. So, once we are, you know, done with fixation of linear waterway, then we come up with the discharge.

So, if we know the discharge once, then we have to, you know, fix its height as per the discharge that, yeah, this is our length and this is our height. So, this much water can actually pass through this bridge. So, that determines the height as well of a bridge. And then we have to, you know, check the geometry. The geometry by geometry, I would say the highway. So, when we design the highway of a bridge, so it can be in a curve, it can be straight, it can be at some angle, it can be in a vertical curve as well.

So, we have to, you know, make bridge in such a location, we have to choose that the geometry should be as simple as possible. Because, you know, we can put bridge anywhere, but when we try to design it and then we try to, you know, put it into the construction phase. So, if the geometry is complex, sometimes we cannot avoid that. So, that is a different issue. But if in the earlier stages, if we can do something about it, we can talk to the highway person that, yeah, we need to, you know, shift the alignment a better here and there.

And if we can do those sort of things. So, I think that that should be done clearly. And then we also should try to find out a location where the linear waterway is less so that we don't have to go with so many spans. Whenever you see on a Google map, just for your understanding purposes, just try to follow a path of a river. So, when you see a river passing through a certain location, at some locations, it has a huge linear waterway and at some locations, it has a smaller linear waterway.

So, if possible, we should try to, you know, fix the bridge in a lesser linear waterway. But then again, we have to increase the height because the discharge will be same. So, keeping all those, you know, parameters intact, we have to fix that location that the linear waterway is also less. So, the HFL, the highest spread level should not increase too much so that it can raise your highway height as well. So, we have to come up at an optimum, you know, solution that, yeah, this is sort of a thing that we need to understand.

So, once we fix that, then we have to do the geotechnical as well. By geotechnical, I mean the subsoil exploration. So, that is one of the most important criterias in our topic because our topic is mainly focused on the foundations of the bridges. So, once the geotechnical capacities we have, then we finally fix our foundations that, yeah, this foundation we can keep as per the soil strata. And then we do the structure design. So, see how long the journey is for a bridge to come up on a site.

And it's not just the structure design. So, every time you now, if you go to a site or like I always mention that if you happen to see a bridge, always try to understand those parameters that I have just defined. And try to, you know, relate that, yeah, this amount of water is passing through this bridge and how they have fixed the height of that bridge, why the pier is different. And if anyone asks you this question that if you have designed one bridge, why not put them everywhere?

So, I hope you guys have the answer now that all sites are different, all the parameters are different. And one of the most important things as well, the earthquake zones in India. So, even they are different. So, you cannot, you know, just rely on one kind of a structure and put it everywhere. You just cannot do that. Every place has a different, you know, topography, soil, earthquake zones, hydrology, topos. And the design, you can keep, you know, a standardized design. But again, parameters are so different that sometimes the standardized design doesn't work as well.

So, yeah, these are the points which I mentioned that we'll do the studies on. So, I'll quickly review them once again. So, first is topographical survey. Second is the calculation of catchment area for the hydrological purposes. Then the hydrology, just to calculate that what kind of discharge will pass through. And then the geotechnical investigations, which means the subsoil exploration that sometimes we have to go as deep as 30 meters as well to find out the actual behavior of the soil. Then seismology is the earthquake zones.

So, India is divided into five earthquake zones. So, then the navigation. By navigation, it means that what kind of things are going to pass through that. Then the construction resources. So, this is also important parameters. So, once we are done with the calculations, we should also be aware of that what construction resources are available at the site. Sometimes we have, you know, remote locations where we cannot have the extreme machinery. These days, it is quite possible to have those sort of things like there are big firms like Gammon, L&T and even other outside players as well in the market who has a good construction resources with them.

But, again, we have to, you know, correlate sometimes with the site as well that, yeah, this is the machinery available or maybe the train size they have, they have limited, you know, capacity to lift up your girders or any structure. So, we have to restrict our design or construction parameters to those things as well. Then nearby bridges, traffic data. So, traffic data, like I said, we have to do origin destination surveys and also the detailed traffic analysis on site to actually determine and then project that, you know, data for the future calculation of the traffic that how it is going to increase in the future.

So, that's how we go from two lane to four lane to six lane and now it's eight lane as well. So, so, so these all are the parameters that, that should be, you know, taken into consideration before actually going into or designing or proposing a bridge location. Yes. So, now I hope you most of aware of that we are talking about the bridges and simultaneously while giving presentations on I'm talking about these terms, the components. So, here in the, in the, in the picture, you can see the, the bridges divided into mainly into three components.

So, the first is superstructure. I'll define it slowly how it goes. The second is substructure and then we have the foundations. So, here in this picture, you can see that everything which is above this point, above this yellow mark, this yellow mark, let's say it's a bearing. So, everything which is above this is, is known as superstructure. So, like I mentioned earlier, in the, in the superstructure, we can have RCC beams, which is also called girders. We can have RCC slabs. We can have PSC slabs, PSC beams, wide edge slabs.

We can have truss as well. We can have steel beams as well. So, everything which is above this point is known as superstructure. So, it's not like, then what is beneath this point till the ground, where we can see the ground, I mean, till the top of ground. We call it substructure. So, in substructure, we have abutments. I'll, I'll define it, what it is. This is abutment cap. This is pier. This is pier cap. The bearings. The wing walls. So, this pier, any intermediate support, which is there in the bridge, is known as pier.

So, it can be like a pillar as well. You might have seen it, most of the common structure is a circular thing. Or, sometimes we have wall type of piers as well. Or, sometimes we have a three column, different columns. Three, four, five, I mean, a set of columns, depending upon the width of the bridge. And, any support which is at the end of the bridge is known as abutment. So, abutment is basically the end support of a bridge. So, the most basic difference between the abutment and the pier.

So, pier doesn't have to, you know, retain the soil on any of its side. Abutment, it is important that it will be retaining all the soil, which is on this side and this side as well. So, because the bridges, you know, we have a highway going through this. Sometimes we have a reinforced earth wall at this locations. You may find them in the flyovers, reinforced earth walls. So, in that case, the abutment don't have to, you know, retain this. So, it can be circular as well at that time.

So, the basic difference between the abutment and the pier is the abutment is your support, which is at the end of a bridge. And, it supports the soil behind it. And, the pier is the intermediate support. And, the cap, cap is generally where we keep the bearing on. This is abutment cap. This is pier cap. So, this is a bearing. And, bearing is something which helps us to, you know, transmit the load from the superstructure to the substructures. So, it can be elastomeric pads. It can be POTCAMP PTFE bearings.

Depending upon the, you know, what kind of loadings we have, we go with the different kind of bearings. So, their major role is to, you know, transfer the loads from the superstructure to the substructure smoothly. And, then the wing walls, as you can see. So, wing walls is a kind of a retaining wall as well. We can put a retaining wall as well. So, it's just a different shape that gives them different names. So, if it looks like a wing, we call them wing wall. But, the purpose is same as the retaining wall.

So, what they do is, they protect the bridge from the soil. So, when soil, soil will not fall only in one direction, only in the longitudinal direction. It will fall in all the directions. So, in the longitudinal directions, we have abutment. But, in the other direction, in the direction of a bridge, we have to provide the wing wall. So, that the soil doesn't come off into this location. And, then finally, we have the foundations. So, in this picture, we can see. Pile foundation here. This is one of a kind of a deep foundation that we generally use in our river bridges. And it is fixed on the top with the help of a pile cap. So a pile cap helps us in a fixation of a pier as well as the pile. So this pile cap and the pile comes under the foundation. So we can have different foundations, pile foundations, well foundations or shallow foundations as well sometimes.

So these are the major components of a bridge and we will, you know, try to cover up one by one. So in the next superstructure, so the components, the bridge above the bearings. So the girders, like I mentioned earlier, the RCC and PSC. So RCC is reinforced cement concrete and PSC is your pre-stressed concrete. Or it can be RCC slabs as well or any other, like I mentioned, the steel beams, the trusses or those sort of bridges. Then bearings, it can be elastomeric pads, it can be potcomb BTFE. On the top of it, it can be arch, maybe cable, cable stade like, or it can be truss as well. Or sometimes it can be steel composites as well.

Then going to the substructure. So in the substructure, like I mentioned, we have these components, abutments. So structure, where the superstructure rests. So you can see in this picture that this girder is being rested on the abutment cap. So this abutment helps us to rest this top slab on over it. And it is located at the ends of the bridge. Piers, it has the same criteria, but it is the intermediate supports between two bridge spans. If this is a span, so any intermediate support that helps to, you know, keep a slab over the top of it is known as the pier.

And then we have the wing walls. It is located next to the abutments and they are the earth retaining structures.

Want the rest of Design of Bridge Foundations using STAAD.Pro?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Design of Bridge Foundations using STAAD.Pro course

The remaining 51 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Design of Bridge Foundations using STAAD.Pro course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.