← Previous lessonFree lesson 3 of 3 · lesson 3 of 25

Unlock all 25 lessons of Design loads considered on bridgesFull course ₹40,000 · paid

Price & syllabus
Free lesson · 34 min · no payment

Bridge Live Loads: IRC Class A, 70R and Influence Lines

A free lesson from Skill-Lync's Design loads considered on bridges course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 2 Session 1 Part 1”

What will you learn in this free Design loads considered on bridges lesson?

Reviews dead loads, then covers live loads on highway bridges under IRC 6, including class A, class 70R, track and footway loading. Explains lane combinations and builds influence line diagrams for shear force and bending moment at a point.

  • IRC class A, 70R, track and footway loading
  • Lane combinations for three and four lane bridges
  • Influence line for shear force at a point
  • Influence line for bending moment and STAAD load definition

What comes after lesson 3?

Later in Skill-Lync's Design loads considered on bridges course (paid): lesson 4, Part 2; lesson 5, Part 3; lesson 6, Week 3 Session 1. The full course has 25 lessons (10 h 3 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hello and welcome to the next session of our course, Design Loads Considered on Bridges. And in today's session, we'll be talking about Live Loads on the Bridges. So in the last week, we had learned about dead loads, wherein we discussed about unit weight of materials, self-weight of structural elements. Then we solved example of calculation of self-weight of superstructure, as well as self-weight of substructure. Then we discussed about moment distribution method, and we did a STATPRO software demonstration, wherein we compared the results obtained from the moment distribution method with those obtained by the STATPRO analysis.

And in the coming session, we'll be talking about the various types of loadings on bridges, mainly IRC class A loading, IRC track loading, IRC class 70R loading, and the footway loading. We'll then go ahead to discuss the influence line diagram for calculation of bending moment and shear forces on the beams. And we will also see how we define the loads and their application in STATPRO. So the learning objectives will be that we will learn about the different types of loadings on highway bridges, including live loads, as well as footway loads.

We'll see the influence line diagram and then finally discuss about the load definition and application of loads in STATPRO. So let's begin our discussion on the types of loadings. So basically, the first type of loading on highway bridges as given in IRC 6 is class A loading. And it is typically used on all roads with permanent bridges and culverts. So you see on your screen, a typical axle arrangement of a class A load. So a class A load consists of the axle arrangement as shown here and the distances between the various axles.

So we have 1.1 meter distance between the front axles, then we have a 3.2 meter distance, then we have 1.2 meter distance, then 4.3 meter, 3 meters, 3 meters, 3 meters, and 3 meters. And the axle loads are 2.7 tons, 2.7 tons, 2 loads of 11.4 tons, and 4 loads of 6.8 tons. So basically, all these loads lie on the bridge as a single crane of loads. And if you add all of these loads together, you get one full class A loading. Let's move to the other type of loading, which is class B loading.

And class B loading is typically used for temporary constructions and bridges in specified designated locations. For example, some bridges on rural roads or state highways, district roads, there typically we use class B type of loading on the bridge for its design. A typical axle load arrangement for a class B loading is shown here. The distance between the axles is 1.1 meter, 3.2 meters, 1.2 meters, 4.3 meters, 3 meters, 3 meters, and 3 meters. And the axle loads are 2 axles of 1.6 tons each, 2 axles of 6.8 tons each, and then 4 axles of 4.1 tons each.

The ground contact area of these axles are, as given in this table, for the 6.8 ton axle load, we have the ground contact area of 200 mm by 380 mm. So this basically specifies the contact area of the wheel of the vehicle when it is flying on the road. So it is the contact area between the wheel and the road. And the more the axle load, more will be the contact area of the wheel. For axle load of 4.1 tons, we have a ground contact area of 150 mm by 300 mm.

And for an axle load of 1.6 tons, we have a ground contact area of the wheel as 125 mm by 175 mm. And these tables and these loads are shown in table 2 of IRC-6 code. And it is given on page 13. Let's now discuss class AA track loading. So a class AA track load typically resembles a moving military vehicle, a military tank. And its total load is 700 kN. The contact area and the dimensions of this load are shown in this figure. The outer to outer dimensions are 7.2 meters.

And the contact length is 3.6 meters. The individual wheels are 850 mm wide. And the distance, clear distance between the wheel is 1.2 meters. The distance C basically specifies the minimum distance at which this vehicle can fly or the minimum distance which this vehicle needs to maintain when it is moving on a highway. And it has to maintain a certain horizontal clearance from the curb. So this C for a class AA track loading is typically 1.2 meters. So class 7 TR loading is to be used on bridges which are located in designated municipal areas and along specific routes.

Structures on national and state highways are usually provided for these routes. So all the national highways and state highways are typically designed for these loadings. And as I pointed out that this has to be a military kind of a load which is considered to be flying. So all the state and national highways, they are highways of national importance. And it is possible that military movements might happen sometimes. And therefore the bridges on the national and state highways have to be designed for these kind of a movement of tanks.

And then we have another type of loading, class 7 TR wheel loading. The arrangement of axles is shown here for class 7 TR wheel loading. We can see that a class 7 TR wheel load typically consists of the 7 axles of 8 tons, 2 axles of 12 tons and 4 axles of 17 tons respectively. The distance between the axles as shown here are 3.96 meters, 1.52 meters, 2.13 meters, 1.37 meters, 3.05 meters, 1.37 meters. And the transverse dimension of these bogies or these axles are represented here.

So these 7 TR wheel loads can come in different configurations and they might cause different effects on various members of the bridge. For example, on a cantilever of a bridge, a small single axle load might create maximum amount of design movements. Similarly, two bogies of 20 tons each, which are also considered as part of 7 TR loading, might create more onerous effects as compared to this entire train of loads. So when we are designing the structure for 7 TR loading, we should consider all of these configurations.

Also, it is important to understand that 7 TR loading comes in three configurations, L type, M type and N type. And the configurations for the wheels of all these loadings are described here. Depending on the type of structure, we have to check for all of these loadings and any of these loadings can govern on the particular bridge that we are designing. So we need to be clear with all of these loadings and these loadings are given on page number 10 of IRC 6, 2010, 70. Then the IRC class 70R track loading, if the span is too large, we have to run two or more than two 70R track loads.

We should ensure a minimum distance of 90 meters between them. So when we are designing the bridge, we have to ensure a minimum distance of 90 meters before applying another 70R track loading on the bridge. Now let's talk about footwear design. So footwear design is typically the curved part of the bridge, which is shown here. So this is for the movement of pedestrian traffic and is also referred to as sometimes as a footpath. So for this footpath, we have to consider a footwear loading. Thank you.

So basically a footway is a pedestrian way or a path including a raised walk along the edge of a bridge where the use of moving or stationary vehicles is prohibited. And this footway is typically used for the movement of pedestrians. The major girders, trusses, arches or other members supporting the footways in bridges constructed for any of the loadings listed must be designed for the following live load. As per square meter area. So we'll now look at the footway load, the magnitude of the footway load for which the bridges have to be designed.

As per class 206.1, for an effective span of 7.5 meters or less, we should take a footway load of 400 kg per meter square. And if the effective span of the bridge is greater than 7.5 meters but less than 30 meters, this intensity of this footway load which will be used for design of the bridge shall be determined according to the equation provided below. And that equation is the footway design load P should be equal to P dash minus 40L minus 300 by 9 where P dash is 400 kg per meter square.

L is the effective length of the bridge. So L is the effective length of the bridge and for effective spans longer than 30 meters, the intensity of the load must be calculated using this equation where P dash is 400 kg per meter square. The footway design load P is equal to P dash minus 260 plus 40 internal divided by L multiplied by 16.5 minus W by 15. And here this equation is given in clause 206.3 of IRC 6 2017 page number 26. Okay, and P dash in this case is taken as 400 kg per meter square and W is the width of the footway in meters.

Also, we need to see the relevant clauses in IRC 5 and this clause should be read in conjunction with IRC 5. Now, let us see the various live load positioning for a roadway. So, for example, we have roadway. We need to see what will be the configuration of the loadings that need to be considered and we'll be discussing about them in the subsequent sessions. But first, let us talk about the influence line diagrams. So, influence line diagrams is a diagram that displays the reactions, shear force and bending movement at every section or distance of any span.

The influence line diagram displays how loads or reactions affect the span and to obtain the maximum bending and shear forces, we must run the loads on the wheels through the girder and draw an influence line diagram for each of them. So, these are the load positioning that we were talking about. There are several other combinations given IRC 6 from which we need to assign the loading to the location with the respective type of vehicle. And later, by plotting ILD, we can get the maximum shear force diagram and bending movement diagram to move further along in the design.

So, as you see here, for class A two lanes, we have a carriageway of 13.2 meters to 16.6 meters. So, this basically is a carriageway for a four-lane bridge. For a four-lane bridge, we can have several combinations of loadings. One of the combinations is two lanes of class A and one lane of class 70R. It is important to note that 70R, whenever it flies on the bridge, it occupies two lanes of the bridge. So, two lanes here of this four-lane carriageway are considered to be occupied by 70R.

And the remaining two lanes are occupied by class A loadings, one in each lane. The minimum distance is also mentioned here as 1.2 meters between the vehicles. It is important to note that in 7.25 meters, no other vehicle is permitted because class 70R typically occupies a space equivalent to two lanes of the bridge. And this is given in a 17 and 18 of IRC6. Similarly, if these two class A vehicles are not flying on this bridge, then another option could be that these two class A vehicles are replaced by another 70R vehicle.

And since 70R vehicle is already considered to be occupying two lanes, so on this four-lane carriageway, only two 70R vehicles are flying. So, this is case 2 is one combination, case 3 is another combination of vehicles which can move on a four-lane carriageway. So, when we are designing a bridge for four lanes of live load traffic movement, we need to consider both of these cases. For a single lane, you see here, this is a bridge which has a carriageway of 5.3 meters to 9.6 meters. For this, it is a two-lane bridge and one combination is that both of these lanes are considered to be occupied by class 70R.

So, one class 70R can only fly in this lane at a time or else there could be two class A vehicles also which can move in this if we do not consider this 170R. As I pointed out, in a two-lane bridge, there could be either 170R or two lanes of class A, one in each lane. Similarly, for 9.6 to 13.1 meters, it is a three-lane bridge. So, here, three lanes of class A are considered. So, all these cases are specified in IRC6 and they are being reproduced here for your easy understanding.

For a four-lane bridge, as I pointed out, one combination is two lanes of class 70R, two vehicles of class 70R, one in each of the two lanes or 170R plus two class A as was discussed in phase 2 or all of these four lanes can be occupied individually by class A vehicles. So, the important thing to understand here is, one class A vehicle will occupy only one lane and one class 70R vehicle will occupy two lanes. So, let's say we have to design the bridge for three lanes of loading.

So, one option is to load all of these three lanes with class A vehicles individually. So, three class A vehicles can apply on that or to use two lanes for a movement of 170R and remaining third lane for the movement of class A. So, one option could be 170R plus one class A in a three-lane bridge or three class A loadings. Similarly, in a four-lane bridge, there could be three cases. First case is two 70R vehicles considered to be occupying two lanes each. So, this 70R vehicle is occupying two lanes and this 70R vehicle is occupying two lanes.

Another case could be 170R vehicle occupying two lanes and the remaining two lanes are loaded with class A vehicles, one in each lane. And the other option could be, all of these four lanes are loaded individually with class A vehicles. So, when we are designing a four-lane bridge, we have to check for all of these cases. Similarly, if we are designing a bridge for five lanes, then one of the options could be to load all of these five lanes by individual class A vehicles. Similarly, if it is a six-lane bridge, we can load all of these lanes by class A vehicles.

This is, again, a case of three-lane bridge where a 70R vehicle is occupying two lanes and a class A vehicle is occupying one lane. Then we have class A, two lanes. This is a case of a five-lane bridge where three lanes are being occupied by class A and the remaining two lanes are occupied by one class 70R. Because it has been already explained that class 70R will occupy two lanes. So, this five-lane bridges can either be occupied by five vehicles of class A as shown here or three vehicles of class A and one vehicle of class 70R.

Okay, so, this question is summarized here and it is also given in table 6A of IRC 6. So, when we have a carriageway width of less than 5.3 meters, it is considered to be a single-lane bridge. That is, number of lanes considered are one and only one lane of class A occupying 2.3 meters is considered on this bridge. And the remaining width of the carriageway shall be loaded with 500 kg per meter square, which is considered to be a pedestrian traffic. If the carriageway width is between 5.3 meters and 9.6 meters, then it is considered as a two-lane bridge.

So, my saddle won't learn the carriageway of the carriageway. So, you gave it to a carriageway . What do you have to do 길 is the carriageway, then it will bearr��� it to the carriageway, then it is the carriageway goes anywhere Those two lanes can either be occupied by one Class 70R vehicle because one Class 70R vehicle occupies two lanes or those two lanes can be individually occupied by two Class A vehicles, one in each lane. So for a two-lane bridge, two combinations are possible. One is one lane of Class 70R or two lanes of Class A.

Next, if we have a carriageway of 9.6 meters to 13.1 meters, it is considered to be a three-lane bridge. For this three-lane, as we already discussed, one load combination could be one lane of Class 70R for every two lanes with one lane of Class A on the remaining lanes or three lanes of Class A. For 13.1 meters to 16.6 meters, the carriageway is considered to be a four-lane carriageway. For 16.6 meters to 20.1 meters, carriageway is considered to be a five-lane carriageway. And for carriageway width of 20.1 meters and above but less than 23.6 meters, it is considered to be a six-lane carriageway.

And for all of these four, five or six-lane carriageway, the specified load combination, load positioning for live loads is one lane of 70R for every two lanes with one lane of Class A for the remaining lanes, if any, or one lane of Class A for each lane. So, for example, if we have a four-lane bridge, then we can consider one lane of 70R for every two lanes. So, we can either load that bridge by two 70R vehicles, one in each of the two lanes, so 2 plus 2 comes out to be four lanes, or four lanes of Class A vehicles individually.

Similarly, for five-lane of 5 lanes, as we discussed, we can load it by two 70R vehicles, which will occupy two lanes each, so four lanes, plus the remaining lane can be occupied by a Class A vehicle, or all of these lanes could be occupied by Class A vehicles. And for a six-lane bridge, we can have a combination of three 70R vehicles, or two 70R vehicles plus two Class A, or one 70R vehicle plus four Class A. So, the important thing to understand here is the number of design lanes to be considered on the bridge, which will be inferred from this table.

For example, if we have a carriageway width of up to 5.3 meters, it is a one-lane bridge. From 5.3 to 9.6 meter, it is a two-lane bridge. For 9.6 to 13.5 meter wide carriageways, it is considered to be a three-lane bridge. For 13.1 meter to 16.6 meters of carriageway width, it is considered to be a four-lane bridge. From 16.6 to 20.1 meters, it is considered to be a five-lane bridge. And for a carriageway width of 20.1 meters to 23.6 meters, it is considered to be a six-lane bridge.

once we are clear with the number of design lanes from the carriageway width we can decide the number of vehicles that we need to design that bridge for I Hope this discussion is clear to you Now we'll move ahead with the discussion of influence line diagrams so first example on the discussion of influence line diagram the problem statement reads as follows for the simply supported beam shown below draw the influence lines For the vertical reactions that supports a and C as well as the shear and bending moment at point B So we need to calculate the vertical reactions that supports a and C as well as the shear and bending moment at point B the total span of the bridge is 10 meters as shown in the figure so for this first and foremost we need to apply a 1 kilonewton unit moving load at a distance of x from left end a And we need to draw the free body diagram of the beam as shown So at the distance x we have a 1 kilonewton load We can calculate the reactions a y and c y Considering clockwise movement as positive the anticlockwise movement as negative upward force as positive and downward force in negative are being considered Then we need to determine the equation of support for the reaction at a using the equilibrium equations and Consider the possibility that point C is equal to 0 So summation of moments at C is equal to 0 We calculate a y into L minus 1 into L minus x is equal to 0 Which means a y into 10 minus 1 into 10 minus x is equal to 0 a y into 10 minus 10 plus x is equal to 0 We get 10 a y is equal to 10 minus x and a y as 1 minus x by 10 Next we determine the equation of support reaction at C as follows a y to C y is equal to 1 Since the vertical load being applied from the top is equal to 1 Therefore both of these reactions add up to 1 and putting the value of a y as 1 minus x upon 10 plus C y We get 1 and therefore we get the value of C y as 1 minus 1 plus x upon 10, which is x upon 10 So we get value of a y and C y both as a function of x From equation 1 we can determine the value of the influence line ordinate of Reaction at support a So for a y the influence line diagram the ordinate will be 1 minus 0 upon 10 So which means that the influence line diagram?

Ordinate at a particular point means when the load is placed at that point What will be the value of the parameter for which we are making the influence line diagram? so here since we are making the influence line diagram for the Vertical reaction at support a and when the load of 1 kilonewton is on point a Itself all of that load gets transferred To point a itself and therefore the reaction at a y comes out to be 1 kilonewton Similarly calculate the influence line ordinate of the reaction by using different values at 5 meter intervals of x So we can summarize here x is equal to 0 5 and 10 We get the values of a y as 1 0 point 5 and 0 and we can draw the influence line diagram for reaction at a so this influence line diagram basically means that When the load is moving from left to right the reaction at a varies from 1 to 0 0 when the load is on point c the reaction at point a equals to 0 when the load of 1 kilonewton is at point a the reaction at point a is equal to 1 and when the load at point b is equal to 1 Then the reaction at point a for which this influence line diagram is drawn is equal to 0.5 which is shown here From equation to the interest line ordinate of reaction or support c can also be similarly drawn When x is equal to 0 we have c y is equal to 1 because a y is equal to 0 when x is equal to 5 We have c y as point 5 and when it's going to 10 we have c y as 0 So we can summarize these results based on the influence line ordinate of the reaction in the table and we can draw the influence line diagram of reaction at C This influence line diagram shows that when the moving load is at point a The reaction at point C is 0 when the moving load of 1 Kilo Newton is at point B the reaction at point C is 0.5 and when the moving load reaches point C The reaction at point C becomes equal to 1 because all of that loads gets directly transferred to the point C and Where the support is placed?

Now we can determine the equation of shear force at B of portion AB So for that We need to consider this equilibrium Let's say the moving load is of 1 Kilo Newton is at a distance x from point A Reaction at point A is a Y and The moment at B is MB The shear is sp Using the equation of equilibrium for this element AB we get summation of FY which is the vertical forces is equal to 0 We can write a Y Minus SB minus 1 is equal to 0 and we can get s B is equal to a Y minus 1 from there We get s B is equal to 1 minus X upon 10 minus 1 because the value of a Y was calculated as 1 minus X by 10 So SB comes out to be equal to minus X upon 10 Next we need to find the equation for shear force at B of the portion BC we draw the Fieber Boyle diagram of Section BC as shown here in the figure Again using summation FY is equal to 0 we get SB minus 1 plus CY is equal to 0 SB is equal to 1 minus CY and SB is equal to 1 minus X by 10 So the influence line ordinates of shear force at point B for various points of X can be obtained by using these equations And it is summarized in this table So when is X is equal to 0 SB is equal to 0 when X is equal to 5 from the left hand side Which is denoted by this negative sign?

The value of SB is minus half and when X is equal to 5 from the right hand side, which is denoted by this plus sign SB is equal to half and when X is equal to 10, we have a value of SB as 0. With these values, we can draw the influence line diagram for shear force at point B. So this diagram shows that when the moving load is at point A, the shear force at point B is equal to 0. When the moving load is at point B, the shear force at point B is plus 1 by 2 minus of minus 1 by 2, which is equal to 1.

So the distance from this point to this point comes out to be equal to 1. So the entire force of 1 kilonewton which is placed here is reflected in the beam's internal force as a shear force of 1 kilonewton. And when the load moves to point C, the shear force at point B equals to 0, right? Next, for the influence line diagram of movement at point B, we can use the same figure and we can calculate the movement MB as AY into L minus 1 into L minus X, which we can see from this figure.

So the movement at point B is AY into 5 plus minus of 1 into 5 minus X. So here, this L is basically 5. AY, putting the value of AY as 1 minus X pi 10, value of L as 5, we get MB is equal to X pi 2. And from the figure shown, we can find the equation of movement at B from the portion BC in a similar manner from this figure. So we have movement at B is equal to CY into L minus 1 into L minus 10 by L, which is moment at this point B is equal to CY into L, which is this distance, which is 5 meters, minus 1 into L minus this distance, which is 10 minus X, which is the distance of this moving load of 1 kilonewton from point C.

So again, putting the value of L as 5, we get MB as 5 minus X by 2. And then putting the value of X as 0, 5 and 10, we can get the value of MB as 0, 2.5 and 0 kilonewton meter per kilonewton. So this per kilonewton implies that we are calculating the design movement MB from a unit load of 1 kilonewton. Okay. We can draw the influence lines for the moment at point B as follows from this statement. So this means when the live load is at point A, the movement at point B is 0.

When the moving load of 1 kilonewton is at point B, the design movement is 2.5 kilonewton meter at point B. And when that load moves to point C, the design movement at point B becomes 0 because all of this force flows directly into the support at C without causing any bending of the beam. Right. I hope this is clear to you.

Want the rest of Design loads considered on bridges?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Design loads considered on bridges course

The remaining 22 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Design loads considered on bridges course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.