← Course overviewFree lesson 1 of 3 · lesson 1 of 25Next lesson →

Unlock all 25 lessons of Design loads considered on bridgesFull course ₹40,000 · paid

Price & syllabus
Free lesson · 23 min · no payment

Dead Loads on Bridges: Unit Weights and Self-Weight Calculations

A free lesson from Skill-Lync's Design loads considered on bridges course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 1”

What will you learn in this free Design loads considered on bridges lesson?

Introduces dead loads on bridges and the unit weights of reinforced concrete, plain concrete, steel and asphalt. Works a solved example calculating the self-weight of a box girder superstructure, ribs and barriers, then the pier, pier cap and substructure.

  • Unit weights of common bridge materials
  • Self-weight of deck, box and crash barriers
  • Weight of precast ribs spaced along the span
  • Pier and pier cap volume and weight

What comes after lesson 1?

The next free lesson is lesson 2, “Moment Distribution Method with STAAD Pro Verification” (21 min). Later in Skill-Lync's Design loads considered on bridges course (paid): lesson 4, Part 2; lesson 5, Part 3; lesson 6, Week 3 Session 1. The full course has 25 lessons (10 h 3 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hello and welcome to the first session of our course on Design Loads Considered on Bridges. In this session, we'll be discussing about the dead loads on bridges. So we'll be covering the unit weight of materials, the self-weight of structural elements. We'll be looking at a solid example wherein we will calculate the self-weight of superstructure and the self-weight of substructure. In the next session, we will be looking at moment distribution method, how to calculate the design moments on a beam with the moment distribution method. And we will also do a software demonstration on a STAT Pro to verify the results obtained by the moment distribution method.

So the learning objectives will be learning the concept of dead loads and unit weight of different materials, how to calculate the various dead loads and apply them onto the structure, how to analyze the dead loads in the bridge structure using the moment distribution method, and how to apply a load in a STAT Pro and perform the analysis and verify the results that we obtained from the moment distribution method. So let's begin our discussion on the unit weight of material. So in bridges, mainly four materials are used for construction, which are shown on your screen.

First is the reinforced concrete, the unit weight of which is taken as 25 kilonewton per meter cube. Then we have plain concrete with a unit weight of 24 kilonewton per meter cube and reinforcing steel with a unit weight of 78.5 kg per meter cube. Asphalt, which is used for overlaying the bridge surfaces, the depth of the bridges, the self-weight of asphalt is 22 kilonewton per meter cube. Now let us look at how do we calculate the self-weight of structural elements. So for that, the self-weight of structural elements are calculated based on two concepts.

They can be applied in the analysis model as a UDL. So for calculation of the UDL, we need to first find out the unit weight of the material, which we had just seen of the four materials. Then we multiply that unit weight by a cross-sectional area of the structural element. So multiplying the unit weight of the material by the cross-sectional area of the structural element gives us the self-weight of the element in kilonewton per meter. We can also calculate the load as a concentrated load, wherein the concentrated load is given as unit weight of the material multiplied by the volume of the structural element.

This is a typical bridge structure which you see on your screen. And this is a double-decker bridge which carries a railway loading on the top deck and highway loading on the bottom decks. The part of the bridge which is above the bearing is referred to as the superstructure. So this box girder which directly takes the load of the moving vehicles or the moving trains as well as moving cars, this is referred to as the superstructure. So the top box is the superstructure for railway loadings and the bottom box, this is the superstructure for the highway loading.

Now the part of the bridge which supports this superstructure is known as the substructure. So this part is the substructure for the railway bridge and it comprises of two elements. First is the pier cap and second is this pier. Similarly, the part below the box here which is the bottom box is the substructure of the highway bridge. So this substructure also has a pier cap and a pier and the total load of this superstructure and substructure is supported on the foundations which comprises of file cap and the files which are referred to as the foundation.

So this is a schematic to demonstrate the elements of a bridge, what is classified as a superstructure and what is classified as a substructure and what do we mean by the foundation of the bridge. We can also see in this figure, the superstructure is basically these box girders and the substructure part is the pier cap and the pier. Below this pier, there will be foundation. Now let's look at a solved example, calculate the self-weight of the superstructure. So this is the same deck which we have seen in the last slide.

We have a left carriageway and we have a right carriageway and both these carriageways are supported on this box structure and we have traffic moving on both these carriageways. The span of the bridge is considered as 25 meters. We have to calculate the self-weight or the dead load of this superstructure. The dimensions are marked herein. This is a 20 meter wide deck and the two individual decks are 8200 millimeters wide with crash barriers on both the sides. One of the crash barrier is 500 thick and the other crash barrier is 450 mm.

Now coming to the box structure, we have the top slab as 270 mm and the bottom slab as 300 mm and it is tapering on the sides up to the dimensions that have been marked in this. Alright. So we have these dimensions and with these dimensions, we will now be calculating the self-weight of this superstructure. So we can make some assumptions for quick calculation of the self-weight for this exercise. Here the deck slab is basically varying from 240 to 355 mm as you can see here.

For calculation of this, we are assuming thickness of the deck slab as 335 mm. So the point is that the thickness of the deck slab can vary depending on the requirements, structural requirements of the bridge. For this calculation, demonstrate we are assuming the thickness as 335 mm. 20 meters is the width of the deck. 335 is the thickness of the deck. So multiplying the width by the thickness, we obtain the cross-sectional area of the deck. And multiplying that cross-sectional area by the unit weight of the deck material, which is the reinforced cement concrete, and it is equal to 25 kN per m3, we obtain a value of 167.5 kN per running meter or 16.7 metric tons per running meter.

So basically, we are using the first method of calculating the self-weight, that is we are calculating it by the method of a UDL. We are multiplying the cross-sectional area of the element by the self-weight of the element, and we are obtaining it as a UDL. Next element is the crash barrier. So the dimension of the crash barriers are marked here, and we will be using these dimensions to calculate the self-weight of the crash barrier. So let's look at the calculation for the crash barrier. So for this crash barrier, we will first calculate the cross-sectional area, then we will multiply it by the unit weight.

So the cross-sectional area, we divide the area into three areas, A1, A2, and A3, and we calculate these areas individually. So we have at the base, A1, which is a rectangle of 150 mm by 450 mm. A2 is a trapezium, the dimensions of HL, 450 mm at the bottom, and 350 mm at the top, and the height is 100 mm. And A3 is again a trapezium with a bottom thickness of 350 mm, and top thickness of 260 mm. And the height can be calculated from total height of 900 mm minus the heights of A1 and A2, which is 150 plus 100, and that is 250 mm.

So subtracting from 900 mm, a dimension of 250 mm, we get the height of this segment A3 as 650 mm. So with these dimensions, let us calculate the areas A1, A1 is a rectangle of 450 by 150 mm, A2 is a trapezium. So the area is half sum of parallel sides into height, parallel sides are 450 and 350, and height is 100 mm. And A3 is also a trapezium, parallel sides of 350 and 260, and height of 650 mm, right? So we have these values, and multiplying all these values, we get the area at 305750 mm square.

Multiplying it by the unit weight of 25 kN per meter cube, we get a value of 7.6 kN per meter as a UDL, or 0.76 metric tons per meter. And we can round it off to 1 metric ton per meter for the purpose of this calculation. Now the number of crash barrier are 4 numbers, and therefore the total weight of all these 4 crash barriers will be 4 times the weight of 1 crash barrier, and therefore the weight will be 4 metric tons per running meter.

Now let's calculate the self-weight of the box for the calculation of self-weight of the box. Again, the dimensions have been highlighted here, and we will divide this area into smaller area for ease of calculation of the cross-sectional area. So, we have different shapes, we have few rectangular shapes, and few triangular shapes in this cross-section. So, we have triangles, 2 triangles at the top, and 2 triangles at the bottom. And similarly, we have these shapes, which can be further divided into rectangular shapes, right? So, these are the dimensions which are marked, and the calculation is shown on the left-hand side.

So, for the bottom rectangle, we have the length as 5.6 meters, and thickness as 0.3 meters. Of course, there is on the edge a slight area, which we are neglecting for this calculation. So, a small triangle on the left and right, we are neglecting, and we will be using a round-off value for the sake of this calculation. For more accurate results, we can also include these small areas. Similarly, for the top, we will calculate the rectangular areas 5.09 meters length and 0.27 meters height. So, this second area is shown here, and then we have the side rectangles, which are 0.4 meters thick, and 1.43 meters in the length.

And these are two numbers, one on the left and one on the right, so we are multiplying it by 2. Then we have triangles, 195 height, these top two triangles, and 0.22 meters as the base. So, we can get the area of this triangle as half length into thickness, which is half height into base, and then multiplying it by the numbers 2, we get 0.04. And similarly, for the bottom triangle, which is 250 millimeters high and 1.2 meters wide, we get the cross-sectional area of this triangle as 0.3.

By multiplying this area of one triangle, which is half into 0.25 into 1.2 by the numbers of triangle 2, and then we get the value of area as 0.3 meters square. Now, adding all these areas, we get total area as 4.54 meters square, right? So, self-weight comes out to be total area into... which is 4.54 into 25 and we get this self-weight as 113.53 kilonewtons per meter which when converted to metric tons comes out to be 11.35 metric tons per meter. We are using factor of conversion of 10 for converting the value of kilonewton to metric tons.

A more accurate value would have been 9.81 but for sake of ease of calculation conversion and to get a approximate idea of the self-weight of structure we are using a conversion track flow. So we have calculated the area of the deck, the area of the crash barriers as well as the area of this box. Now we need to see the other elements which are this rectangular line elements. So these are supporting these cantilever decks and these are precast rips. So these precast rips also have to be calculated.

The dimensions of the rips is marked here and we can calculate the self-weight of the rips by multiplying the volume of one rips by the unit wave. So these rips are basically discontinuous elements. They are not continuous elements throughout the span of the bridge. They are provided at some intervals and in the span of 25 meters they are provided at about 3 meters distance from each other. So to clarify further on this, this rips into the plane of your screens will be, another rips will be 3 meters behind this and they will run for the entire length of the 25 meters of this curdle.

So if they are provided at intervals of 3 meters, in 25 meters we will have 8 spacings. 25 divided by 3 comes out to be around 8 meters, comes out to be around 8 numbers and for that 8 numbers when we calculate the number of rips, we approximate this as 9 numbers. So we have 9 rips on the left hand side and 9 rips on the right hand side. And therefore, the total number of rips comes out to be 9 plus 9 that is 18. Area of the rips will be half base into height, half into 6.1 into 1.7 into thickness of this individual rips which will be in a plane perpendicular to your screen.

So the thickness of this rips is assumed to be 300 millimeters 0.3. So we get the volume of this rips as half into base into height which gives the area multiplied by the thickness we obtain the volume. Multiplying it by the total number of rips, we get the total volume of all 18 rips which are provided on this girder in a 25 meter span on left and right, we get the total volume and multiplying that total volume by the unit weight, we get the total weight of this rips as 699.98 kN.

Now we can convert this load, total load as a UDL by multiplying it by the length of the span which is 25 meters and we get this load as 28 kN per meter comes out to be 2.8 metric tons per meter and this UDL is applied along the length of the beam. So if we calculate the total dead load of this superstructure it will be the self weight of the deck, the self weight of the crash barrier, self weight of the box and the self weight of the rips. We have already calculated these values which are tabulated here 16.7, 4, 11.35 and 2.8.

Final value comes out to be 34.85 metric tons per running meter which is rounded up to 35 metric tons per meter. And this load can be applied in the superstructure as a UDL. So this is a 25 meter span UDL and the value is 35 metric tons per running meter. Now let us calculate on similar lines the self weight of this superstructure which is a 2 cell box and the dimensions are marked herein. So we'll do a similar activity, similar exercise. We will divide this whole cross section into various small rectangular and triangular cross sections and then we will calculate the areas of individual cross sections, add them all up to get the overall area and from that overall area multiplying it by the unit page will get the total weight of this superstructure as a UDL. So here we have this triangular element which is marked as a triangle.

We have this rectangular element, we have another triangular element and we have some more rectangular elements. So quickly we can calculate the area of the rectangle as 1.5 by 0.2 and numbers as 2. So when we are saying this is 1.5 into 0.2 we are referring to the top rectangle. This is 1.5 and 200 thick. So this rectangle which is shown by this blue color and the number of these rectangles are 2. 1 on the left and 1 on the left. So the numbers are marked here as 2. Then we have a triangular element of 1 by 250 mm. This is marked here. So this is 1 meter and we have the thickness as 250 mm. It is not marked in this figure but it is assumed that this thickness is 2. So we have triangles here 1, 2, 3 and 4 which you can see by the movement of the cursor and therefore the numbers have been multiplied by 4. On similar lines you can pause this screen and calculate all these values as well as the numbers and then you will get the overall weight. So the weight will be this area which is 0.3. For example for element number 1 the area is 0.3 the numbers are 2. So 0.3 multiplied by 2 comes out to be 0.6 and when we multiply it by 25 which is the unit weight of RCC element we get the value as 15 kilonewtons. Similarly we can calculate the other values and adding up all of these numbers we get 131.73 kilonewton per meters which can be applied as a UDA on this 8.4 meters of span. So the idea is that we break down the cross section of the superstructure into various rectangular and triangular elements and then we calculate the individual areas add them all up to get the overall cross sectional area multiplied by the unit weight of the material to get the total weight as a UDA right. I hope this is clear to you. Now let's proceed with the calculation of self weight of the eye girders type of a superstructure. So eye girders are also very widely used in pre-structures. We have the eye girders on the bottom, cross girders or end diaphragms which connect these eye girders and there is a deck slab which is lying above these eye girders and above the deck slab we have a wearing coat and on this wearing coat the vehicles will be flying okay. So for the eye girders the dimensions are shown here top dimension is 1200 mm, flange top and bottom flanges are 1200 mm, white 150 mm thick and then a tapered portion of another 150 mm is there. The web is 300 mm and then we have 1600 mm as the total height of this girder. The width of the deck slab is 6 meters. Height of the crash bearer is assumed to be 1000 mm and thickness is assumed as 250 mm. The pier size is 2.5 meters by 2.5 meters.

For unit weight we can consider 20 km per meter cube in case of brickwork and 25 km per meter cube in case of RCC. So wherever we encounter brickwork or PCC we calculate this self weight by taking a unit weight of 20 km per meter cube. This is for your information. So the self weight of the deck slab will be quickly the thickness multiplied by the width which is 6 meters and then multiplied by the unit weight we get the value as 37.5. Self weight of the crash bearer will be height of the crash bearer which is 1 meter multiplied by thickness which is 0.25 meters and multiplied by the unit width.

Here we are assuming the crash barriers of brick masonry or PCC crash barriers. So the weight comes out to be 5 km per meter and number of crash barriers are 2 which is 1 on the left and 1 on the right side. So we have 1 crash barrier on the left side and another crash barrier on the right side. So therefore we multiply it by so 5 multiplied by 2 we get the value of 10 km per meter. Self weight of the eye girder is again the area into unit weight and we can calculate the area of the eye girder by again dividing it into rectangulars and triangular portions.

So we have the top rectangular portion and the bottom rectangular portion which is 1200 mm by 150 mm. Then we have 4 triangles 2 on top and 2 on the bottom. We can also calculate it as a trapezium which has top thickness of 1200 mm and bottom of 300 mm and a height of 150 mm. And then we have this rectangle which is 300 mm thick and 1600 minus 300 minus 300 which is 1 meters of height. So with these dimensions we see that we have calculated the area of the rectangle.

top and bottom rectangle as 1200 by 150 mm multiplied by 2 because we have 2 rectangles. Then the trapeziums half into sum of parallel sides into height plus the web which is 1 meter by 300 mm. And this overall area comes out to be equal to 770 to 500 mm square or 0.7725 meters square. The self weight of the girder comes out to be 0.7725 into 25 into 4 because we have 4 girders in the cross section. We have 4 girders 1, 2, 3 and 4 in the cross section.

And this UDL is again applied on the entire length of the beam. So we have total self weight as self weight of the depth slab plus self weight of the flash barriers plus self weight of the eye girders. And adding all these values we get a value of 124.75 kN per meter. Now let's go for the calculation of substructure. So the substructure dimensions are marked here. We have a typical pier cap and a pier. The height of the pier is marked as 11 meters and the pier cap dimensions are also marked.

So the pier size is 2.1 meter in width and the 2.1 meter. We see here 2.1 meter is the width and in the. Another action it is considered as 2.5 meters which is into the plane of the your screen. High to the pier is 11 meters. We can calculate here you see the dimensions of the pier cap. Bottom is 2.2 by 2.5 meters as I just pointed out in the plane of the paper in the plane of your screen it is 2.5 meters. So this is the top of the pier or the base of the pier cap this pier cap and then we have another dimensions as 3.9 and 5.3 meters. We can calculate the self weight of the pier as 2.5 by 2.1 into 11 which is the volume of this pier.

So 2.1 multiplied by 2.5 perpendicular to the plane of your screen multiplied by the height we get the overall volume of this pier. Multiplying it by the unit weight of the pier we get 1443.75 kN as a self weight which when converted to metric tons comes out to be 144.375. For the self weight of the pier cap we can calculate the volume of the pier cap and multiply it by the unit weight. So for the calculation of the volumes of this custom kind of a shape of the pier cap we have a standard formula which is given as h by 3 into a1 plus a2 plus root of a1 into a.

So here the area a1 is the bottom area and a2 is the top a. So we have the bottom area of 2.5 by 2.2 and the top area of 5.3 by 3.2. So 2.2 by 2.5 and 5.3 by 3.9 these are the two areas. And then we have a rectangular slab at the top which is 600 mm high and the cross section is 3.9 by 5.3 meters. 3.9 by 5.3 meters by 600 mm. 0.6 meters is the volume of the top slab and this is the volume of the bottom portion of the tapering portion of the pier cap.

So by multiplying all these values adding them up and then multiplying by 25 we get 586.292 kN as the total weight of this pier cap and when that converted to metric tons by dividing it by a factor of 10 we get 58.63 meters. Total dead load of the substructure will be equal to dead load of the pier plus dead load of the pier cap which comes out to be 144.375 plus 58.63 and adding these values we get 203 metric tons. So in this manner we can calculate the self weight of the substructure.

Now we are clear how to calculate the self weight of individual elements of the bridge. We first saw the calculation of self weight of the superstructure elements and then the substructure elements. Superstructure elements included the deck slab, crash barrier, the cross section, box builder area, its volume and the substructure included the self weight of the pier and the pier cap. So with this we are now able to apply these loads on the structure and analyze them in STATPRO. Before that we will do a hand calculation and we will try to find out the design movements in a beam when these UDLs that we just calculated are applied on the beam.

We will be discussing about the movement distribution method and movement distribution method results which we obtain will be verifying those results in the STATPRO model and we will be doing this in our next session.

Want the rest of Design loads considered on bridges?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Design loads considered on bridges course

The remaining 22 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Design loads considered on bridges course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.